Horizontal machining center

WMW HECKERT CWK 400 D

Condition: defective spare-parts repository (used), Year of construction: 2002, operating hours: 34,188 h, functionality: not functional, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, nominal power (apparent): 65 kVA, torque: 200 Nm, controller manufacturer: Siemens, workpiece height (max.): 750 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 500 kg, total height: 2,700 mm, total length: 4,700 mm, total width: 3,400 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, rotational speed (max.): 25 rpm, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,801 h, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, For sale is a horizontal CNC machining center, HECKERT CWK 400 D. The machine is currently not functional and is therefore explicitly offered as defective / for spare parts / for refurbishment. Manufacturer: Starrag Heckert Type: CWK 400 D Control system: Siemens Sinumerik 840D Axes: 4 axes (X/Y/Z + B-axis) Pallet changer available Iedpfx Aezb Hfbsfkoth Spindle with only 2,801 operating hours → very good basis for repair Pallet pool with a total of 23 pallets: 15 pallets with threads 8 pallets with grooves Machine is still connected to the power supply → inspection under power is possible Coolant system / chip conveyor / typical equipment available (machine-dependent) Immediately available Buyer is expected to dismantle the machine themselves Loading can be supported upon agreement Due to the condition, the sale is made without warranty or the possibility of return. Inspection is strongly recommended.

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Iodpfx Afjuyx Hzekoth

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 18275, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production of highly precise components for CNC rotary tables. Not a job shop machine. TECHNICAL DETAILS Travel in X-axis: 650 mm Travel in Y-axis: 650 mm Travel in Z-axis: 650 mm C-axis: 360°/continuous High-speed spindle speed max.: 10,000 rpm Spindle taper: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Itedpfx Asy Rmz Aofksh Circular accuracy: 5 µm MACHINE DETAILS Control system: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer + storage tower with 6 positions for up to 8 pallets Note: The machine has been shut down by a qualified electrician and professionally prepared for transport.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 18234, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production line for highly precise components for CNC rotary tables. Not a custom-made machine. TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 650 mm C-axis: 360° / continuous High-speed spindle speed max.: 15,000 rpm Spindle connection: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control system: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Iedoy Rmnvjpfx Afkjth Dual pallet changer Note: The machine was shut down by a qualified electrician and professionally prepared for transport.

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm Iodpfx Afsvkpu Hekoth milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, controller model: Siemens 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm B-axis: 360,000 x 0.001 mm Pallet size: 400 x 500 mm Spindle speed: 50 – 10,000 rpm Tool holding system: SK 40 Itsdpjymw S Ajfx Afkoh Number of tools in magazine: 60 Rapid traverse: 40 m/min Feed rate: 1 – 20,000 mm/min MACHINE DETAILS Control system: Siemens 840 D Power requirement: 65 kW

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Itodpfxeq Ui Hqo Afkoh Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), A surface grinding machine ELB-Schliff with position display is available. Magnetic chuck dimensions X/Y: 900mm/450mm, grinding length: 900mm, grinding width: 450mm. Documentation available. An on-site inspection is possible. Ijdpfsya Hw Ijx Afkjth

Condition: good (used), Machining diameter max: 36 mm Ijdpfotrvzxjx Afketh Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: like new (used), Year of construction: 1998, functionality: not functional, turning height: 1,900 mm, workpiece weight (max.): 15,000 kg, turning diameter: 2,630 mm, faceplate diameter: 2,500 mm, total height: 5,000 mm, total width: 4,800 mm, total length: 4,800 mm, rotary table diameter: 2,500 mm, table load: 15,000 kg, table diameter: 2,500 mm, year of last overhaul: 2025, warranty duration: 12 months, overall weight: 38,850 kg, table speed: 2,500 mm/min, SC2700 Vertical Turning Lathe 2700 with 2 Work Heads - Retrofit Completed Specifications: Retrofit status: recently upgraded (mechanical, electrical, hydraulic systems), in course to be put under power. Electric cabinet: new electric equipment, cables, portcables, covers. Ijdpfx Aoygldgofketh Main motor: original 55 kW, revised. Condition: mechanically like-new, low working hours. Inspection: available any time. At request, it can be overhightened for a higher workpiece, or receive an CNC upgrade. Price, install and transport on request. More technical specifications on request.