Fibre Laser Marking Machine

WINTER LASERMAX FL-20 STANDARD

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Crsdpfskkiwxox Albog

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) Crsdpjh Ad E Hefx Albeg 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: good (used), 30 linear meters of used Schäfer R3000 shelving 📋 Consisting of: • 24 x frames, pre-assembled / approx. 250 cm high / 80 cm deep / new • 92 x shelves / 128 cm long / 80 cm deep / 250 kg load capacity / used • 8 x cross braces • Color: galvanized, gray • Condition: very good, see photos 💰 Price €4,320 net, excluding VAT. • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment • Product number: P2601 We constantly have over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock. (Changes and errors in technical data, information and prices, as well as prior sale, are reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & used and new heavy-duty racking Description: Are you looking for high-quality storage racks to buy? With around 100 of its own employees, Lenox Trading is one of the largest dealers for new and used storage technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ READILY AVAILABLE: • Over 10,000 linear meters of racking systems available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a real all-round worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including thorough cleaning. 2. Commission-based auction: Carrying out auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and handover in a clean condition. Crsdpfx Alsd Nf Svjbsg Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Zoller Titan tool measuring machine: - Year of manufacture: 2019 Csdpszd Acajfx Albjrg - Software: titan/pilot 3.0 - Max. tool length (Z-axis) = 550 mm - Max. tool diameter = 260 mm - Tool holder: SK40, KSK63, etc., as required

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees Csdorxt Axspfx Alberg • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Crjdpfx Alswzmcbobeg Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg Credswhzmzepfx Albsg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: as good as new (ex-display), functionality: fully functional, Cobra is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar. Cobra is the first high pressure pneumatic pump without packing. The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials. The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations. Cobra 40-10 is the ideal solution for working with small quantities and frequent color changes – recommended for single-gun up to three-gun applications in the wood and furniture industry, small carpentry shops and joineries, and the general metal industry. Cobra® 40-10 is also ideal for feeding base or hardener for 2K mixing units (FlexControl and FlexControl Plus). Wagner membranska pumpa OMJER PRITISKA 40 :1 MAKS. TLAK MATERIJALA NA ULAZU PUMPE 20 bara DOVOD MATERIJALA M-M 36x2 IZLAZ MATERIJALA M-G 3/8’’ TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ RADNI TLAK 250 bara MAKS. BRZO UDARA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm3/DS TEMPERATURA OKOLINE 10 - 60 °C Cedpfxjqzx Nkj Albsrg TEŽINA 19,0 kg MAKS. RAZINA ZVUKA 74 dB(A) MATERIJAL PH 3,5 - 9,0 pH PUMPA JE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC

Condition: good (used), machine spirit level, block spirit level, frame spirit level, spirit level, precision spirit level, frame spirit level -Machine spirit level: frame spirit level -Frame size: 150 x 30 mm -Reading: 0.3 mm/m -Dimensions box: 195/195/H55 mm -Weight: 1.7 kg Credpeu H R A Iofx Albsg

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3542, conveyor belt length: 2,200 mm, conveyor belt width: 2,200 mm, conveyor belt speed: 116 mm/s, total length: 4,000 mm, total width: 4,000 mm, total height: 4,500 mm, overall weight: 4,000 kg, discharge height: 3,500 mm, power: 7.2 kW (9.79 HP), type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, pivoting range: 90 °, Equipment: documentation/manual, We offer the following used D.B. S.R.L. PCLO 2200 contour foam cutting machine, manufactured in 2007. Manufacturer: D.B. S.R.L. Model: PCLO 2200 Year of manufacture: 2007 Credpjx T Ax Nsfx Albjg Condition: used Category ID: 34 Type ID: 3028 Type: Contour Foam Cutting Machine If you have any questions or need more information, please send us a message or call us.