Blade Grinding Machine

WINTER GRINDER 3000 AUTO MAG LINEAR

Year of construction: 2003, condition: good (used), Size: max 370 x 320 x 50 mm, min 140 x 105 x 2 mm Mechanical speed: 4.000 c/h Pgsdelzh Dijpfx Adnsw Equipment gathering machine: • 2 additional handfed stations • Wohlenberg Sprinter 7009 • 16 stations • missing sheet and double sheet control • criss-cross delivery perfect binder • 15 clamps • spine preparation station • milling and roughening unit • dust extraction • fume extraction • hotmelt spine gluing unit • hotmelt side gluing unit • 2 premelters • pile cover feeder • plates-chain transport • conveyor system • trimmer Wohlenberg 44 FS 50 standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Pgedpfx Adsh Nrh Ujnjw Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Pododyky Topfx Adnegw Speed max up to 15.000 Prod./h Table height 876 mm

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Grinding width: 250mm Psdjtqtk Aepfx Adnsgw Workpiece height: 220mm Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump

Year of construction: 2014, condition: good (used), Year of Construction: 2014 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. - Performance/Speed: 55.000 cph (product permitting) - min format product (head/foot x spine): 102 mm x 152 mm (4.00" x 6.00") - max format product (head/foot x spine): 321 mm x 500 mm (12.63" x 19.68") - max pagination: 64p tab & magazine, 32p digest & delta - Product orientation: Spine leading - Low Infeed - Infeed height (min/max in mm): 500-1000 mm - Waste gate - Stream Aligner / Jogger - Single squeeze roller - Laser Counter, model: Scatec-2 - Upper bin height in mm: 127 mm - Upper Bin with Flipper Fingers - Turntable with compression plates - max Stack height in mm: 330 mm - Pneumatic turntable - Pneumatic pusher - Delivery Direction to the right - Delivery height in mm: 876 mm (34.50“) - Delivery Table included - Over all length equipment: 2514-2759 mm - Over all width equipment: ~700 mm - Over all height equipment: ~1800-1950 mm - Input Power: 3 kVA - Voltage: 400 V, 3 Ph, 50/60 Hz - Air requirement: 110 l/min 5.5 bar (6 cfm 80 psi) - Weight: 900 kg (2000 lb) - Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Pgsdpfx Aeh Itciodnew - Condition: cleaned & in working conditions

Condition: good (used), Size: max 320 x 260 x 40 mm min 150 x 100 x 2 mm Pgodpfogbxl Uox Adnow Book block thickness: max 40 mm min 2 mm Cover size: max 560 x 325 mm min 202 x 150 mm Speed: max 5.000 c/h Power requirements 24 kW (220/380V, 50Hz) Length 7.543 mm Width 2.400 mm Equipment gathering machine: chain tensioner with hand fed 20 stations missing sheet and double sheet control perfect binder 18 clamps milling and roughening unit hotmelt spine and side gluing unit pile cover feeder cover pressing station lay down device standards 1 set of operator manuals standard equipment information: condition: very nice machine in good working condition

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. Pedpopugwijfx Adnogw The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Year of construction: 1998, condition: good (used), ROTOFLEX R 1300 Slitter / Rewinder Specifications:  Age: 1997  Width : 13" (330mm) Pgsdpfeq T Schjx Adnsw  Unwind shaft diameter: 76mm  Rewind shaft diameter: 76mm, 50mm, 40mm  Location : Germany Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly)

Condition: new, Model Name Podpfx Asgvqxtjdnogw FALKEN R 1

Year of construction: 2010, condition: excellent (used), Gravity roller conveyor, industrial roller line Manufacturer: KNAPP Year of construction: 2010. Material: steel Length: 2700 mm Pgsdpjfz I Hfofx Adnew Width: 315 mm / total width: 385 mm Roll diameter 50 mm Distance between the rollers: 150 mm variable Powder-coated, perforated steel frame Guide rail Height-adjustable support leg, extensions 100 pieces in stock!