Press

weingarten Hsz250

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Iaedpfx Ahew D Accevsp Charmilles Millenium CNC Control Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatically lowering work tank (drop-door) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of complete system: 2600 x 2600 x 2340 mm Total weight of system: 3300 kg The machine is cleaned, completely overhauled and tested for all functions after order confirmation. You receive a 6-month warranty on the machine. Commissioning service is available upon request.

Condition: used, Year of construction: 1988, Technical details: pressure: 630 t plate thickness: 16 mm Total force (nominal): 630 to stroke: 30 - 150 mm knife-edged ring capacity: 320 t Nominal force: 160 t : 910 x 1050 mm : 900 x 900 mm dayligth: 410 mm ram adjustment: 120 mm plate width: 40 - 450 mm plate thickness: 0,5 - 16 mm : 1 - 1000 mm total power requirement: 100 kW weight of the machine ca.: 28 t dimensions of the machine ca.: 4.50x2.20x2.80 m Press Feintool + feeding unit * Iaedpovmht Hjfx Ahvsp

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 39035, National Machinery 750 S3 Operational - Working Iedpfstnhp Rex Ahvjap 5 FORGING STATION Supplied with control process and soundproof cabin Machine Size: 750 S3 Number of dies and punches: 5 Total heading load (kN): 2730 Number of strokes/min. (min/max): 90 Cutoff diameter: 22 mm. Cutoff length (min/max): 4,75/80 mm. Kickout stroke - die (min/max): 19/100 mm. Kickout stroke - punch: 52,4 mm. Motor size (kW): 55 Net weight (kg): 41.500

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 The machine is ready for immediate use! Iaedpfsur N Daox Ahvop

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm Iajdpfslp Uz Rsx Ahvep stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Condition: ready for operation (used), Year of construction: 1998, pressing force: 250 t, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, stroke length: 150 mm, power: 37 kW (50.31 HP), Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Iajdpfx Aory Trpehvop Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Iaedpfx Ahshz Ua Sevjp

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Iajdpfx Ahju Utaisvep Sheet thickness: 3 mm Cutting angle 2° Connection 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip - Angle fence - Extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm Iajdpfx Ajvuukbshvep die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Workshop-overhauled Surface Grinding Machine GEIBEL & HOTZ Type FS 60 AC Machine no. 2012190398 Year of manufacture 1998 - 2025 Workshop overhauled by Stange Werkzeugmaschinen in 2025 Electro-magnetic chuck 600 x 400 mm Table clamping area 960/620 x 400 mm Table longitudinal travel max. 660 mm Grinding width 400 mm Cross travel with automatic feed max. 400 mm Cross travel manual adjustment max. 425 mm Distance spindle center to magnetic chuck max. 425 mm Table speed 2 - 28 m/min stepless Grinding wheel dimensions Ø 300 x 50 x 76 mm Manual vertical feed 1 division = 0.002 mm Manual cross feed 1 division = 0.01 mm Electrical connection 400 Volt, 50 Hz. Isdpfow Hhbcsx Ahvjap - Electro-magnetic chuck GEIBEL & HOTZ, Type HPM 600 x 400, height 99 mm - Automatic depth infeed for surface and plunge grinding with digital actual value display - Depth infeed setting via decade switches - Cross feed for surface grinding motorized or manual via hand wheel - Hydraulic table longitudinal travel - Central lubrication for table longitudinal travel, Y and Z axis movements, and lead screws - Mounted grinding wheel Ø 300 mm (usable Ø 290 mm) - Separate electrical cabinet - Hydraulic unit integrated into machine base - Coolant system with paper band filter - Machine mounted on transport pallet for shipping Space requirements (L x W x H) 2850 x 2250 x 2500 mm Space requirements (L x W x H) 3000 x 2400 x 2500 mm Weight approx. 2 tons (complete) Very good condition – workshop overhauled by Stange Werkzeugmaschinen