Single-Column Eccentric Press

Weingarten ARP 100

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm Hnjdpfx Ahsxh Swhe Njg tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) Hnjdpeip Uqmofx Ah Neg with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Hjdpfxju Rwa Ij Ah Njng Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, throat depth: 610 mm, Pressing force (72 kN) with 610 mm dept Automatic lower tool changer with 4 stations Automatic upper tool changer with 4 stations Reliable and energy-efficient thanks to fully hydraulic system Hjdpfx Asxfi Npoh Nsng Equipped with patented safety system as standard Advanced control with touch screen and automatic press-in fastener length control Equipped with 2 * MAS-350 modular feed systems for press-in elements

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Hnsdpfx Aekvnumeh Nog Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ 12-Weeks delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ MULTI-TREAT SPRAY PRE TREATMENT MACHINE ✅Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It provides the possibility of working up to 8 different chemicals with tanks in varying numbers according to the process. All tanks are made of 316 SS and isolated. Hedpfx Ahjfggcwo Nsng According to the process steps, the number of tanks and how many tanks are heated are determined. ✅The heating inside the tank is provided by gas heat exchangers. The processes can be monitored, times and temperatures of all processes can be adjusted via the Plc touchscreen. ✅Any failures that may occur in the system can be observed from the electrical panel. ✅Automatic floats in tanks, stop the system automatically when there is not enough water or chemicals in the tanks and the amount of liquid is automatically supplied by transferring between the tanks and the system stays safe. ✅Under all tanks there is leakage pool. Leakage pool has made from 316 SS. Tanks are made of 316 Quality 2 mm Stainless Steel. The material is passed through penetration tests made of argon welded and sealed. The grids inside the tank prevent mud access to the pumps. ✅The cabin interior consists of sandwich panels 304 stainless steel and the exterior is made of powder coated sheetiron. ✅Panel thickness is 80mm. It comes from polyurethane filled stainless steel panels. PPT ring pipes and nozzles provide long life usage. ✅Thanks to the steam suction fan, vapor diffusion into the working area from the system is prevented. The washing machine doors are container type and they are sealed with silicone gaskets. ✅The movable washing platform in the cabin moves back and forth through the cabin to wash the materials. The hoses are carried by the mobile carrier system. There are separate pumps for every processes and 1 waste pump for discharging liquids from the tanks. Discharging pump will be connected to chemical discharging tank. ✅The machine floor is designed to be inclined towards the pool discharge area. ✅There are manual application liquid spray guns for every processes for manual usage. System has manual mode for pretreatment. Dripping time and process time can adjusted from the PLC panel and dripping time is valid for manual application.

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Hnedperb Afaefx Ah Nsg Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine Hodpfonxh T Rex Ah Njng

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use Hsdpfxsd Iipmo Ah Neng • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm Hodpscubatsfx Ah Nong ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work