Mechanical lathe

WEILER 260

Year of construction: 1973, condition: excellent (used), turning length 125 mm Gujdoxpxqwspfx Aa Eed weight of the machine ca. 0,4 t

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe Guodpfex Hp Iwox Aa Ejd 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: used, functionality: fully functional, Mechanic's lathe, manufactured by WEILER Guodpfx Aaezga Npj Esd Spindle speeds, continuously variable Level 1: from 160 - 900 rpm Level 2: from 320 - 1800 rpm Technical data: Center distance approx. 500 mm Center height above bed approx. 125 mm

Condition: new, functionality: fully functional, Hand lever quick-change chuck Spindle speeds from 110 - 3600 rpm Multifix A head Collets Gedezc I A Ropfx Aa Eeud

Condition: excellent (used), functionality: fully functional, spindle bore: 652 mm, Pinacho L1 lathe, model 225 x 1600mm swing, maximum diameter over bed 450mm, over cross slide 690mm, over compound slide 215mm, spindle bore 52mm, 18 speeds 32-1800 rpm, 5.5 hp motor, with steady rest, with quick-change tool post, with various accessories, lathe in good condition. Gedpfxjzbzzwo Aa Ejud

Condition: good (used), functionality: fully functional, 1 x Mechanic’s lathe Weiler RDU 260-80 Machine with complete accessory package, in good condition. Technical data: - Spindle bore: 38 mm - Spindle speeds: 125 - 2800 (left/right) - Center height: 130 mm - Distance between centers: 350 mm Equipment: - Crank cross slide with Multifix A quick-change system - Crank tailstock MK 2 - Hand lever cross slide - Hand lever tailstock with draw-in collets - Parting tool slide - 6-position turret - Collet chuck with draw-in collets - Coolant system Accessories: 65 x draw-in collets 358 E C - 5 1 x draw-in collet in tailstock 366 E (MK 2) 1 x quick-change tool holder Multifix A Guedpfszczbysx Aa Eed with 1 cassette 1 x 3-jaw chuck Röhm 140 mm Further accessories, such as collets for the tailstock or tools for the tailstock/turret, are available at an extra cost. The machine can be inspected while powered.

Condition: used, Year of construction: 1970, Weiler lathe with tailstock. Gsdpfshtnu Tox Aa Ejud

Condition: new, welding current max. 250 A open-circuit voltage max. 66 Volt Guodoy Aa Itspfx Aa Eod connected load frequency 400 V weight 65 kg Dimensions (LxWxH) 900 x 500 x 750 mm MIG/MAG gas-shielded welding machine: incl. 3m hose package.

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Description: Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Gusdpfx Aaoyu Ilis Eod Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel :- Chuck guard with limit switch monitoring :- Chip deflector :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: used, Hand revolver lathe: GDW Type/Model: RD 250 Condition: Used Center height: 125 mm Distance spindle nose – revolver head max.: 400 mm Swinging diameter over bed: 260 mm Swinging diameter over cross slide: 128 mm Spindle head DIN 55027: Size 4 Spindle bore: 38 mm Internal taper similar to DIN 228: MK 5 Collet bore: 26 mm Continuously variable up to: 60-3,000 rpm Frequency-controlled AC motor 100% ED, 70 Hz: 4.6 kW Revolver slide travel: 100 mm Guedpozcb Ruofx Aa Ejd Cross slide travel: 90 mm Revolver tool holder: 6 x 3/4" Length x Width x Height: approx. 1300 x 700 x 1,400 mm Weight depending on equipment: approx. 520 kg Connected power: 9 kW Equipment: -Vibration-damped direct drive to the main spindle, continuously variable with magnetic brake for the main spindle and spindle stop in case of emergency stop -6-position inclined revolver slide with Ø ¾" tool holders -Continuously variable feed rate adjustment -For revolver slide with feed drive -Collet chuck (pneumatically operated) -Extensive collet set -Emergency stop button -Coolant system -Spindle guard