Vibratory finishing machine

WALTHER TROWAL CM 605

Condition: excellent (used), Year of construction: 2013, operating hours: 15,159 h, machine/vehicle number: 61600, A trough vibrator (vibratory finishing machine) including centrifuge from the manufacturer Rösler is for sale. The machine is in very good condition and can be inspected on site by telephone appointment. Djdpfx Aloqrr A Rs Aoku

Condition: used, Year of construction: 2008, Technical details: batch weight: - total volume: 600 l external diameter: 1716 mm Effective volume: 345 l Work tank width: 1616 mm max. workpiece size: 270 mm revolution per minute: 980 - 1460 U/min total power requirement: 6 kW weight of the machine ca.: 1600 kg dimension machine approx.LxWxH: 2,4 x 1,7 x 1,44 m height: 3,42 m This machine was never operated with abrasive grinding media and therefore shows very little wear. The polyurethane lining is in excellent condition. The Walther Trowal CB 600 offered for sale was used exclusively for the treatment of stamped metal parts. The parts were processed in a dry finishing process using corn cob granulate, whereby they were conveyed through the media. The purpose of this process was to condition the surface of the stamped parts in such a way that sticking together during subsequent stacking was reliably prevented. The machine was used exclusively for this application and operated only in dry mode with corn cob media. Walther Trowal CB 600 The Walther Trowal CB 600 is an industrial circular vibratory finishing machine with a gross capacity of 600 liters. Suitable for: ·Deburring ·Edge radiusing ·Grinding ·Surface smoothing ·Polishing ·Descaling ·Cleaning metal parts Typical workpieces: ·Turned parts ·Milled parts Dksdpfx Aljzdnlae Asu ·Stamped parts ·Cast parts ·Forged parts ·Gears Machine can be demonstrated under power. i.D. *

Year of construction: 2017, condition: ready for operation (used), A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible. Dksdpfx Alezkldtj Aeu

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool Dkjdpfx Alszxz Hgj Aeu - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: used, EQUIPMENT 1°) Model CD 200 – PN Vibratory deburr * with sound deadening lid. * parts separation * work bowel volume : 200 [L] * diameter : 1085 [mm] - weight : 475 [kg] - overall dimensions : 1.560 x 1.350 [m] Djdpfxoug U Eqo Al Ajku 2°) Model BFHL 350 / 3300 Hot air belt dryer * weight : 1200 [kg] - overall dimensions : 2.470 x 1.03 [m] 3°) Model SDT 1500 Rotary table * table dia : 1500 [mm] * max load over table : 25 [kg] - weight : 100 [kg] 4°) Model ZM03-FL Centrifugal filter * recycling process water - weight : 250 [kg]

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Dedpfx Alszaud Ao Ajku Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: used, Barloader FMB Turbo 5-55 / 3200 A Dsdoy Umvbjpfx Al Aeku

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki swing diameter 370 mm X1- Axis 380 mm X2- Axis 155 mm Z1- Axis 460+155 mm Z2- Axis 610 mm Dsdpfxsznnc Hs Al Ajku y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000

Condition: used, Year of construction: 1980, 1250 mm tank diameter / tank height 1000 / 350 mm Dedpfx Aljxq Hgvj Aoku turning speed range 920 / 1415 U/min voltage 380 V power requirement 1,9 kW volumn 125 Liter weight of the machine ca. 600 kg dimensions 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images

Condition: new, Year of construction: 2026, Machine type: EVT 400 Dkodpfx Aljyq N D Es Aou Manufacturer: ERBA Power kW: 4.0 Total volume: 400 liters Description: The EVT 400 long trough vibratory finishing machine from ERBA features a robust, hot-cast polyurethane lining. Discharge or separation is carried out via a bottom drain (manual/pneumatic). Removable dividers allow the work tank to be partitioned into compartments for individual processing of parts. The machine is equipped with an electrical control cabinet and can be optionally fitted with a fully automatic PLC process control system. Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted via frequency inverter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net, plus the currently applicable statutory VAT and freight costs. The photos may show the system including accessories, which are optionally available and subject to additional costs. The quoted price refers to the base machine. The photos are for illustration purposes only. The actual appearance and dimensions may differ from those shown. If you are interested, we look forward to your inquiry. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely to present our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging platform). The first step will be to send you a non-binding offer, which will also include information about our general terms and conditions, legal notice, and right of withdrawal before a purchase/contract is concluded.