Horizontal machining center

Heller+FPT1000 HF5500+FPT1000

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Swing diameter over steady rest carriage: 650 mm Kdsdpfx Ajyk R Dyenxol Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Tool changer: 3 x 30 positions Control: SINUMERIK 840 C Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks!

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Kodpeuddcasfx Anxjdl Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets Kdodpfx Ajpumdcenxsl approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t Ksdoynmpyepfx Anxedl dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Machine weight 8500 kg

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Kodpfxexxm Hfo Anxedl Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: excellent (used), Year of construction: 2019, operating hours: 9,100 h, functionality: fully functional, We offer you: CNC Turning and Milling Center Manufacturer: DMG Mori Model: NTX 2000/1500 Year of manufacture: 2019 Control: DMG Mori Celos with Fanuc F31iB5, Mapps M730UM Technical Data: Max. turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Travel paths: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm Main spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Sub spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Milling spindle: Speed range: 0 – 20,000 rpm Tool holder: Capto C6 Number of tool stations: 114 positions Feed rates: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min b-axis: 100 rpm Through-hole chucking device: Ø 67 mm Kjdpfxeyhdqns Anxjdl Operating hours: approx. 9,100 h Spindle hours: approx. 4,600 h Technical features and accessories: - High/low pressure chucking system for main and sub spindle; programmable hydraulic 2-stage chuck pressure control - 8" hollow chuck Ø210 mm, hydraulic 3-jaw chuck Kitagawa BB208A621 on main and sub spindle, incl. hollow clamping cylinder - Dual foot switch with safety cover - B-axis with 0.0001° positioning - Tailstock function for sub spindle - Self-centering hydraulic steady rest, centering diameter 20 – 165 mm, make: SMW SLU-X3.1 - Machine designed for coolant emulsions - Hinged belt chip conveyor - Coolant pistol - Coolant shower at the main and sub spindle chuck - Compressed air blow-off system for main and sub spindle chuck - Coolant supply through the sub spindle - Oil separator as band skimmer - ICS, compact filter system/paper band filter Knoll KF110/700, 70 bar, tank 700 l - Direct position measuring systems - Spindle probe measuring system with wireless signal transmission, Renishaw RMP 60 - Automatic tool setter for turning-milling spindle - EtherNet I/P interface - Electrical I/F for multi-channel bar feeder/loader, terminal block wiring - Air filter unit for drying and oil separation - 10 additional M codes - 95 kVA three-phase autotransformer - 3D quickSET - Pocket and island milling function - Fast fixed cycles - Program restart - Optional skipping of a program block - Workpiece unloader with conveyor belt and collection tray Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data, specifications, and subject to prior sale and errors excepted!

Condition: good (used), Year of construction: 2005, Horizontal machining center Machine type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of construction: 2005 TECHNICAL DATA: Travels: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse: (X/Y/Z): 50 m/min. Speed range: 10,000 1/min. Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Tool places: 140 Kedpfsv Nhylsx Anxsdl Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirement (LxWxH): 9.200 x 4.900 x 3.920 m Equipment features: Internal cooling (IKZ): bar Chip conveyor High pressure pumps

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Kdjdpfei Ar Rujx Anxsl Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Max. Acceleration: 1,5 m/s² Positioning accuracy: 0,02 mm/m Repeatability: 0.03 mm/m Max. Table load: 1500 kg

Condition: excellent (used), FANUC Professional 6 Control Working travels 900 x 900 x 1020 mm Tool changer with 136 Positions Spindle speeds -10'000 rpm Spindle taper HSK100 2 paletts 630 x 630 mm B-axis 0.001° Palett changer FASTEMS FPC1500 Cooling through spindle 3D measuring taper Tool breakage control device Tool lenght measuring device Chip conveyor Misc. accessories Ksdpfxex A E Enj Anxedl MARCELS MASCHINEN AG

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X axis: 730 mm Y axis: 730 mm Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Kdsdpfxewxygzj Anxel Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.