Used Emcoturn 320 for sale (3,603)

Condition: used, Year of construction: 2007, operating hours: 47,205 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 80 mm, injection pressure: 1,829 bar, overall weight: 22,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 420 V, input current: 482 A, Krauss Maffei KM 320-2700 C3 injection molding machine for sale Due to the renewal and expansion of our production capacity, we are offering our Krauss Maffei KM 320-2700 C3 injection molding machine for sale. The machine is currently fully connected and operational in our production facility. This allows potential buyers to view and test the machine in working condition, subject to serious interest. Technical specifications Manufacturer: Krauss Maffei Type: KM 320-2700 C3 Year of manufacture: 2007 Clamping force: 320 tons Injection unit: 2700 Screw diameter: 80 mm Serial number: 61009058 Machine weight: approx. 22,000 kg Total operating hours: 47,205 hours Production hours: 39,180 hours Control system: Krauss Maffei MC4 Condition of the machine The machine is complete and is currently installed in our production environment in the Netherlands. The machine is operational and connected, which allows for inspection while powered on and a demonstration of its operation. The machine is being sold due to a change/renewal of our production capacity, not because the machine is out of service. Inspection and availability The machine is located in the Netherlands/Bodegraven and is currently connected and being used for production. Inspection is possible by appointment. If there is serious interest, the machine can be demonstrated in working condition. Chjdpfx Ags Ahy D Serod Additional photos, technical data, and a video of the machine in operation are available upon request. Location: Netherlands/Bodegraven Condition: used, operational Availability: by arrangement

Condition: excellent (used), Year of construction: 2020, - Siemens Sinumerik 828D control system - Accessories: Collet chuck Working area Swinging diameter over bed ø250 mm Chsdjzcv Rispfx Agred Swinging diameter over cross slide ø85 mm Maximum turning diameter ø85 mm Maximum turning length 225 mm Maximum bar capacity ø25.5 mm Distance between centers (spindle nose – tailstock center) 405 mm Slide travel range Slide travel X 100 mm Slide travel Z 300 mm Main spindle Spindle mounting (centering rim) ø70 h5 Spindle outer diameter at front bearing ø50 mm Main spindle clamping system Hollow cylinder (pneumatic) with draw tube, max. passage ø25.5 mm Max. chuck size ø100 mm Main spindle drive AC motor, power (100%/40% ED) with integrated holding brake for driven tools 3.7 / 5.5 kW Speed range (continuously variable) 60-6300 rpm Max. torque 35 Nm Dimensions Height of the turning axis above the floor 1130 mm Overall height 1820 mm Footprint (without options) 1700 x 1270 mm Weight 1400 kg

Condition: like new (used), Year of construction: 2021, operating hours: 3,573 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E45 (Year 2021) CNC turning machine with C-axis – FANUC 0i-TF, 3,573 hours, like new condition! Includes a parts collection device for removing finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of manufacture: 2021 • Serial number: S4E213351 • Control system: FANUC 0i-TF incl. handwheel • Operating hours: 3,573 h • Machine type: Single-spindle machine with parts collection device • Number of tool positions: 12-position VDI-30 axial turret with two bolt circles • Number of axes: 3 (X/Z/C) • Condition: Like new, fully functional • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Additional pictures and videos of the machine in operation will be provided upon request. _____ Item description For sale is a high-precision CNC turning center EMCO EMCOTURN E45 from the year 2021 with low operating hours of only 3,573 h, in very good condition. Special features: • Control system: Modern FANUC 0i-TF control system for easy programming, including handwheel • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 gently transports finished workpieces out of the work area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret change time of only 0.14 seconds. • High-quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical data: Working area and travels: • Swing diameter over bed: 430 mm • Swing diameter over cross slide: 300 mm • Distance between centers (spindle nose-tailstock): 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Cross slide travels (X / Z): 160 / 510 mm • Resolution of the C-axis: Full C-axis with a highly accurate resolution of 0.001° Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power main spindle: 13 kW • Torque on the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / Spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two bolt circles • Mounting shank according to VDI (DIN 69880): VDI 30 • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for boring bars: Ø 32 mm • Turret change time: 0.14 sec Feed drives and accuracy: • Rapid traverse rate (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of delivery & terms of sale: • CNC turning machine EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included • FANUC operating manuals and machine documentation • Loading with a forklift on site is included. Csdpfx Ajzkhuhogrshd The machine is available immediately and can be inspected and tested under power after prior appointment. Subject to prior sale and errors.

Condition: good (used), Year of construction: 1993, operating hours: 4,313 h, oil tank capacity: 350 l, overall weight: 26,000 kg, input voltage: 400 V, input frequency: 50 Hz, Max. pressing force: 320 t Bending length: 6100 mm Chodpj Ah Eprsfx Agrod Distance between uprights: 5500 mm Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Oil capacity: 350 l Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Machine weight approx.: 26 t

Condition: excellent (used), Year of construction: 1987, Slot drilling machine Manufacturer: Ganner Type: Junion LBM 320 Year of manufacture: 1987 Power: 1.5 kW 2-lever operation Table size: 850 x 360 mm Chedpfx Age Ahg I Tjrod Drill chuck: 20 mm Dowel drilling device with 24 detents Workpiece stop Center stop pneumatic feed Pneumatic workpiece clamps, 2 pcs.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 20658, stroke length: 250 mm, throat depth: 305 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table height: 980 mm, oil tank capacity: 350 l, overall weight: 22,500 kg, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 320 t, clearance between the columns: 3,760 mm, distance table to ram: 500 mm, ram plate length: 4,500 mm, table length: 4,800 mm, table width: 250 mm, type of input current: three-phase, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Codpfx Aozktg Aogrshd Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: good (used), functionality: fully functional, Gildemeister NEF 320 CNC lathe Technical data: Manufacturer: Gildemeister Type: NEF 320 Machine: CNC lathe Max. turning diameter over bed: 320 mm Max. turning diameter over carriage: 150 mm Max. turning length: 500 mm Max. distance between centers: 750 mm Spindle speed: 10–4,000 rpm Spindle bore: 50.8 mm Motor power: 9 kW Chedpfxj Aggiie Agrod Control system: Heidenhain MANUAL plus

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: BRP2014C04, type of input current: three-phase, input voltage: 400 V, input current: 24 A, compressed air connection: 6 bar, We offer this used Meevo MKF MKF BR 320 fabric cutting machine, year of construction 2014. Chsdpezg Tu Sjfx Agrod Machine type: Textile Cutting Machine Year of manufacture: 2014 Voltage: 400 V Current: 24 A Pressure: 6 bar Frequency: 50 Hz Short-circuit current: 10 kA Weight: 1500 kg Number of phases: 3 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 170 h, degree of automation: automatic, working width: 5,100 mm, pressing force: 320 t, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Bending length between columns 4100mm Speed of approach movement 100 mm/s Speed of bending movement 9 mm/s Chsdpfxjwq Aa Is Agrod Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Year 2015 Only 170 working hours 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: used, Year of construction: 2022, Miter bandsaw machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 CNC-G Machine No.: 3000614217F - workshop-tested Year of manufacture: 2022 Cutting range (round): 300 mm Cutting speed: 20-100 m/min, continuously variable Standard equipment includes: - Angle display on the screen - Cutting feeler - Swiveling control panel - Hydraulically controlled clamping vises - Swiveling cutting gap during miter adjustment - Material feed via ball screw - BRP saw band monitoring - Chip removal brush - Coolant system Cedpfj Aav Rysx Agrehd - Operating manual Used, as is, no warranty The machine technically complies with current safety regulations.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Hydraulic horizontal band saw automation machine, Jaespa Type W 320 AZ – 6 Year of manufacture 1995 Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Chodpfe Aa Iibjx Agrjd Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: used, type pump : Waukesha 320 U2 Chods Ahg U Iepfx Agrjd all stainless steel pump housing 2 gears all stainless steel dimensions (l x w x h) : ± 1.700 x 600 x 900 mm loading height ± 600 mm discharge height: ± 600 mm inlet and outlet DN 150 3 x 400V 50 Hz 11kW, 1500 / 123 rpm

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC turning machine EMCOTURN 365 MC with counter spindle Year of manufacture: 1998 Control system: Sinumerik 840D Accessories: - Parts collector - Chip conveyor Codpfsz Tc Utox Agrjhd Further details to follow Includes a wide range of accessories.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: 230655, control type: NC control, actuation type: hydraulic, roller (top) diameter: 320 mm, side roll diameter: 240 mm, sheet thickness (max.): 25 mm, overall weight: 10,500 kg, total length: 4,350 mm, total width: 1,800 mm, total height: 1,950 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, Key Technical SpecificationsWorking Length: 2050 mm Upper Roll Diameter: 320 mm Lower/Side Roll Diameter: 240 mm Bending/Rolling Capacity: Designed to handle steel plates up to 25 mm (rolling) and pre-bend up to 20 mm. Working Speed: 1.5 to 5 meters per minute. Main Features 4-Roll Design: Allows full circle and varying radius rolling with precise edge pre-bending in a single pass. Linear Guide System: Directs hydraulic piston power straight to the material for higher bending accuracy. Application Suitability: Ideal for medium to heavy metal fabrication, cylindrical ferrules, and stainless steel processing. Optional: NC-control, Hydraulic Overhead Crane (Lift) 2,5m Codpszzn A Tjfx Agrshd

Condition: used, Year of construction: 1999, operating hours: 72,805 h, functionality: fully functional, spindle bore: 65 mm, total length: 3,074 mm, total width: 1,941 mm, type of input current: three-phase, overall weight: 4,000 kg, spindle nose: Kk6, Equipment: documentation/manual, We are offering this used EMCO EMCOTURN 365/65 CNC lathe, manufactured in 1999. Model: EMCOTURN 365/65 Supply voltage: 400 V Phases: 3/PE Frequency: 50/60 Hz Maximum current Imax: 59 A Rated current Im: 27 A Chsdpozzrwhsfx Agrod Short-circuit current Ik: 6 kA Duty cycle S6: 40% Year of manufacture: 1999 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2001, Ref. -No.: 10665 Manufacturer: GLEASON - PFAUTER Type: G 320 Year of construction: 2001 Type of control: CNC Control: Siemens Numerik 840 Storage location: Halberstadt Country of origin: USA Machine length: 3700 mm Machine width: 2400 mm Machine Height: 2750 mm Workpiece Weight Max.: 380 kg Weight Of The Machine Ca.: 11,5 t Chjdpfxe Ahmwgj Agred Travel -X Axis: 230 mm Travel -Y Axis: 135 mm Travel -Z Axis: 200 mm Max table speed: 240 1 / min

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, total height: 2,075 mm, total width: 2,140 mm, total length: 3,250 mm, table length: 800 mm, overall weight: 2,450 kg, distance table to spindle center: 495 mm, Equipment: documentation/manual, ABENE milling machine, type VHF-320BS, in new condition, previously used in an educational institution. Specifications: Chodpszt Ibtofx Agrjd - Year of manufacture: 2016 - Table dimensions: 800x400mm - X-axis travel: 600mm - Y-axis travel: 500mm - Z-axis travel: 450mm - Distance table-spindle: 45-495mm - 3-axis variable feed - Drilling spindle travel: 75mm - ISO 40 tool holder - Milling head, rotatable 140 degrees - Spindle speed: 55-3000 rpm, variable in 2 steps - Motor power: 7.5kW - Machine dimensions: 3250x2140x2075mm - Machine weight: 2450kg Machine equipped with: - SONY (Magnescale) digital readout on 3 axes - Variable spindle speed (digital display) - Variable feed, 3 axes (digital display) - Cooling system - Drilling spindle - Tool changer - Machine manual - Compliant with occupational safety regulations

Condition: used, Year of construction: 2015, Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Chsdpfx Agjz Rkcasred Control voltage 24 DC Clamping force 38 kN Upsetting force (max.) 10 kN Air pressure (min.) 6 bar Air consumption per cycle 52.6 Nl (at 6 bar) Cooling water consumption 4–5 l/min (20–25°C) Machine weight approx. 800 kg Dimensions W/D/H 1214 / 957 / 1982 mm Connection voltage 380–420 Bi-metallic / carbide bandsaws 6×0.40 – 54×1.60 Wood saw blades 6×0.40 – 50×1.10 Stainless steel saw blades 10×0.40 – 40×0.80 Strip blades 6×0.40 – 50×1.00 Steel strip S235JR max. 150 mm² Stainless steel max. 60 mm² Max. clamping width 50 mm

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chodpfxsyh Hg Ne Agrjd Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Documentation and accessories Machine is powered up and available for inspection

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Year of manufacture: 1998. Cedpfezxg Amex Agrshd Piovan dryer, model TDM604. Year of manufacture: 2005. Includes documentation. The machine is powered on for inspection.

Condition: good (used), Year of construction: 2021, 1 Horizontal bandsaw machine Manufacturer: BEKA-MAK Type: BMSO 320 Year of manufacture: 2021 Design: Fully automatic bandsaw Cutting capacity at 0° (round): 320 mm Cutting capacity at 0° (square): 320 x 320 mm* Cutting capacity at 0° (flat): 320 mm Saw blade: 3,660 x 27 x 0.9 mm Blade speed: 15–120 m/min Main motor: 2.2 kW Hydraulic motor: 0.37 kW Coolant pump: 0.12 kW Chip conveyor: 0.25 kW Feed motor: 0.25 kW Working height: 640 mm Dimensions: 1,900 x 850 x 1,300 mm Cjdpfez Ea Dnsx Agrshd Weight: 770 kg Design: Roller feed with limit switch Additional accessories: Roller conveyors

Year of construction: 2021, condition: used, functionality: fully functional, Automatic Label and Sticker Roll Cutter Plotter VD 320 III Very lightly used The device is equipped with 4 cutting heads Integrated web guide roller system ensures precise web alignment throughout the entire cutting process Electromagnetic (powder) brake on both unwind and rewind units guarantees constant tension; electronic adjustment Cold lamination with adjustable film-to-web registration Capability to cut and separate into individual pieces Vacuum table for web splicing during roll change – minimizes material waste Matrix rewinder Touch screen TECHNICAL SPECIFICATIONS: Feeding type: roll-to-roll / optional guillotine for roll-to-sheet Csdjxw Uqvopfx Agrohd Max. knife working area: 320 x 400 mm Max. roll diameter: 450 mm Roll width: 40–340 mm Label cutting speed: 6 m/min (for 10 x 10 cm size) – speed depends on label type and shape Slitting speed into bobbins: up to 80 m/min Cutting accuracy: 0.2 mm Supported file formats: PLT Bobbins width: 10–330 mm Supplied with manufacturer's software Compatible with graphic files from Corel Draw and Adobe Rotary blade type: tungsten steel Power supply: 1~, 230 V/50Hz Dimensions: 158 cm x 90 cm x 136 cm Machine weight: 450 kg

Condition: used, Rotary table, welding positioner, Used Machine Chjdpfx Ags Ahyn Sorsd Manufacturer: Weiss GMBH Type: TC 320-06 Overall Dimensions: Width: 1010 mm Depth: 1010 mm Height: 1000 mm Electrical Data: 400V, 0.7A Table Size: Ø 1010 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Chjdpfx Agsz Eh Uujred Technical data: >> Year of manufacture 2008, machine no. 347141 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel ranges X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. The conversion from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site under power. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347138 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axes 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Chsdpfx Agjz Eh Ubersd Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for vertical and horizontal operation. Switching from vertical to horizontal operation is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.