Paint finishing system

VOGAMAKINA VFDKL-3

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Fpsdpfxoxnpczs Akvok Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Fpedpfexk U Arox Akvek Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) Fpjdpelkgvbofx Akvok accessories: coolant equipment, collet chuck incl chucks

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Fpedsqpdkcspfx Akvjk - Capacity: about 7,500 - 15,000 dowels/hour

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. Fsdpelccvmefx Akvjpk 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be prepared. Grinding cell with Kuka KR 180 grinding robot Berger grinding cell 2012 (external grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture 2011 - KRC 4 controller - Additional axis (7th axis) BSS10 belt grinding station - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations Fodjg Saqvspfx Akvepk - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Tool changer cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm We have 4 such cells.

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Fodpfx Akswr Dxhevopk

Condition: good (used), Hook type shotblasting machine 250 kg TURBOTECNICA DELTA GR 7-10 Type: Hook type Max. diameter of workpiece: 750 mm Max. height of workpiece: 1000 mm Max. workpiece weight: 250 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 260 Turbine wheel diameter: 260 mm Power of turbine: 5,5 kW Max. turbine flow: 74 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 2.000 m3/h Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Fpsdewm Ar Nspfx Akvok Machine is ready for operation

Condition: good (used), Year of construction: 2011, functionality: fully functional, total height: 4,000 mm, inner dimension length: 6,500 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, workpiece height (max.): 2,200 mm, workpiece length (max.): 6,500 mm, Equipment: cabin, Powder coating system for workpieces with dimensions: length 6500 mm, width 1500 mm, height 2200 mm. Fpedpfx Akjvdlfzevsk

Condition: new, Year of construction: 2024, functionality: fully functional, power: 12 kW (16.32 HP), inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,000 mm, total length: 1,395 mm, total width: 1,600 mm, total height: 2,045 mm, actuation type: electric, fuel type: electric, Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Available immediately ⚡ Professional support! Plus VAT, plus shipping costs. ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport quote. ✅ Available immediately – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2 years warranty Available from stock – no production lead time ➖➖➖➖➖ ⭐ Matech powder coating oven with electric heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Available immediately ☘️ Professional curing ✅ Electrically heated powder coating oven ✅ In-stock item – available immediately ✅ No waiting time for production ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Adjustable automatic exhaust fan function ✅ Audible signal at the end of the curing time ✅ Insulated door with a special locking system ✅ Stable sandwich panel construction ✅ Good heat retention due to strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shutdown after process completion ✅ Can be used with a mobile workpiece trolley ➖➖➖➖➖ Technical specifications: Fodpfeghf R Usx Akvepk ✔️ Model: MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L x 1000 mm W x 1000 mm H ✔️ External dimensions: 1600 mm L x 1395 mm W x 2050 mm H ✔️ Electrical heating power: 12 kW ✔️ Fan capacity: 1,500 m³/h ✔️ Circulation fan: 0.75 kW ✔️ Total power: approx. 14 kW ±10 % ✔️ Digital temperature control ✔️ Temperature continuously adjustable up to 220°C ✔️ Inside: 1.2 mm galvanized steel ✔️ Outside: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm fiberglass ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Audible signal after process completion ✔️ Control panel: 1 unit ➖➖➖➖➖ Secure your in-stock item now! This unit is currently available 1x in stock. Ideal for workshops, smaller production areas and companies looking for a reliable electrical solution for professional powder coating on short notice. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer you various financing models. Feel free to contact us for leasing, hire purchase or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from the service and quality advantage! ✨ Request a quote now – make your company ready for professional powder coating! ☀️ 2 YEARS WARRANTY ☀️