Surface Grinding Machine

ABA easyGrinder

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABA Easygrinder 5 Surface Grinding Machine. Year of manufacture: 2013 Technical specifications: Grinding length: 500 mm Distance from spindle center to magnetic chuck: 570 mm Grinding width: 250 mm Spindle power: 5.5 kW Spindle taper: 36 mm Ijdpfex Ti Sisx Abfoth Grinding wheel: 300 × 50 × 76.2 mm Footprint (W × D × H, mm): 2,200 × 1,910 × 2,230 Machine weight (kg): 3,000 Options: Central lubrication, glass scale on Y-axis, variable speed control on the grinding spindle. The machine is in very well-maintained condition. Inspection under power is possible at any time by appointment in 58119 Hagen.

Condition: like new (used), Year of construction: 2022, functionality: limited functionality, grinding length: 450 mm, grinding width: 150 mm, table length: 450 mm, table load: 120 kg, table width: 150 mm, grinding spindle speed: 3,000 rpm, Surface Grinding Machine from Showroom (new) Manufacturer: Okamoto Model: ACC-450 AV (open design) Year of manufacture: 2022 Control: Okamoto FX Operating hours: 0 Iedpfxox U Daws Abfjth S/N: XXXX Technical specifications: ----- • Table size: 450x150 mm • Table travel longitudinal/cross: 530x165 mm • Max. table load: 120 kg • Max. grinding height table / new wheel: 397.5 mm • Standard magnetic chuck: 450x150 mm (P=13mm) • Automatic infeed: 0.0001–0.030 mm • Manual micro feed: 0.0001 / 0.001 / 0.01 mm • Spark-out strokes: 0–5 • Rapid traverse: 600 mm/min • Grinding wheel: 205 x 6–19 x 31.75 mm • Speed: 3,000 rpm • Grinding spindle motor: 1.5 kW • Connected load: 7 kVA • Dimensions: 2,000 x 1,430 x 2,265 mm • Machine weight: 1,250 kg Accessories: ----- • Grinding wheel on flange (new) • Paper band filter with 160 l tank • Table dresser + diamond • Work light • Tool kit • Operating manuals

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Itjdjyit Uljpfx Abfjh

Condition: excellent (used), Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm Iodpfxsvwgp Uj Abfoth Control MillPlus HEIDENHAIN table dimension - longitudinal 1000 mm table dimension - cross 600 mm spindle turning speed range 12000 U/min Number of axles 4 St. rapid traverse 30 m/min tool change unit 24 -fach weight of the machine ca. 9 t The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Itedpfx Ash Hvk Aobfeh Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Itjdpfsx Hgg Dsx Abfsh

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Isdpfxjgyy I As Abfoth Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: ready for operation (used), Number of tool slots: 25, max. rotational speed: 6300/min, tool cone: SK40 with DIN 7388 tightening pin, connected load: 35kVA, controls: Deckel Maho MillPlus, operational/ spindle hours: 56,344/ 14,965h, with chip conveyor and 600l coolant tank, without tools and clamping devices. Isdpfx Abjlbmtnsfsth

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be set up Isdpeg Saqvjfx Abfjth Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4,650 x 2,400 x 3,100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 controller - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions: 3,500 x 30 mm - Max. contact wheel diameter: 200 mm - Motor power: 4 kW 2 x polishing stations, - Polishing wheel diameter: 350 - 600 mm - Power: 5.5 kW Gripper change cabinet Belt conveyor Interoll Automation GmbH - Total length approx. 2,000 mm - Belt width approx. 440 mm The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to customize every detail as shown in the video.

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m Itjdofn Aqmopfx Abfeh decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.