Plasma cutting machine

Uni-Kat Sp. z o.o. Thunder 3D

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Guodjzv Syfopfx Angeh Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm Guedpoi Eg Nkofx Angsh -Weight: 1308 kg

Condition: new, Year of construction: 2025, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2025) – New machine, 0 hours, ready for production Opportunity to acquire a brand new MAXIEM 2040, year 2025, in pristine condition. The machine has never been run, with 0 hours on the pump, fully inspected and ready for immediate production start. Equipment: Gusdpfx Anown El Uogsh A-Jet (5-axis cutting head) – beveling, angle cutting, and automatic taper compensation Rapid Water Level Control – adjustable water level (raise/lower) Premium software – lifetime free updates and unlimited licenses Pump: 40 HP Pump hours: 0 The machine features a cutting area of approximately 4 × 2 meters, offering high precision, great flexibility, and maximum operational reliability. An excellent choice if you want a modern waterjet cutting machine with full capacity – without waiting for a new order. Delivery and installation can be discussed if required.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition Gsdpfx Anjt Awm Dsgeuh - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. Gedsvx N Shjpfx Angsuh The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: good (used), 3 machine vices Goody. Gedpfsrai Akex Angouh

Condition: good (used), Year of construction: 1996, Rondo Compactline Bun Line - used - year of manufacture: 1995-96 - components: Compactline work table, calibrator, cutting station, moistening station, filling machine, roller, rolling station, guillotine, receiving table, 4 cutting rollers, 3 decorations - length: 7.70 m - stainless steel construction - manual control - machine from production - complete overhaul available on request - ex stock - price on request Guedjyglg Uepfx Angoh

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, For sale is a very well-maintained 5-axis simultaneous machining center, DECKEL MAHO (DMG MORI) type DMU 60 monoBLOCK, manufactured in 2009. The machine is characterized by very low spindle hours and extensive equipment. Highlights & General Information: Manufacturer / Model: DECKEL MAHO (DMG MORI) DMU 60 monoBLOCK Year of manufacture: 2009 Control system: HEIDENHAIN iTNC 530 Operating hours: approx. 30,000 h Spindle hours / program runtime: approx. 8,000 h Technical Data: Travel ranges: X = 730 mm Y = 560 mm Z = 560 mm 4th axis (B-axis / swivel head): +30° to -120° (NC swivel milling head with hydraulic clamping) 5th axis (C-axis / rotary table): 360° (endlessly rotating NC rotary table, resolution 0.001°) Main spindle: Max. 12,000 rpm Tool holder: SK 40 Gedpfezz Snyjx Angjuh Tool changer: 60-position chain magazine Equipment & Accessories: Internal coolant supply (IKZ) including paper band filter system Chip conveyor Workpiece measuring probe: DMG TS 649 Complete documentation and machine keys available Upon request, for an additional charge, loading and transport (throughout Europe) can be arranged. All prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours?

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Gujdpfx Aszzknxsngjh Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Dear Mr./Mrs, we have opportunity to offer you PLATEG plasma (ion) nitriding equipment. Chamber is with hot wall. Equipment is in excellent condition, fully functional, without any problems, ready for use. Equipment characteristic: - Dimensions of construction: 2700 mm x 1250 mm x 800 mm - Dimensions of chamber: Diameter 1000 mm x 1200 mm - Maximum dimension of nitriding batch: Dimeter 900 mm x 900 mm - Total equipment power: 70 kVA Gedpevfm I Hofx Angjuh - Power of heaters: 30 kW - Power of plasma supply (BIAS): 30 kW - Plasma supply is unipolar, voltage 0-1000V, current 0-60A, DC to 33 kHz, pulse on and pulse off adjustable - Plasma supply (BIAS) is only one year old, bought from Germany (El Connect company) - Vacuum pump: Pffeifer vacuum 65 - Vacuum system is controlled by new electrical cabinet with PLC and HMI - 4 MFC for dosing gasses - Plasma nitriding process, post oxidation process Company Planit is also giving assembly services of this equipment, maintenance manual, user manual, technology (nitriding and oxidation) and also service. For any question, don't hesitate to ask. Best regards.