Lot of dowel drills

Unbekannter Hersteller

Condition: used, length: 450 mm width: 40 mm height: 50/70 mm Ijdotr R D Aspfx Ah Njtb Hole spacing: 50 mm number: 45 pieces Lot of new polyethylene (PE green) carriers for a block hoist in a sawmill.

Year of construction: 2021, condition: new, Directly available from stock Ijdpsica Amjfx Ah Notb List on request 550 pieces = 1x truck load ( 15000 kg theoretical weight / 13900 kg actual weight)

Condition: used, Saw unit including cable and switch. Itsdpfxjw Uz Rro Ah Nob engine: 0,24 kW number of revolutions: 2,700 rpm

Condition: like new (used), Timing belt sold by the meter 100 mm suitable for Reinhardt saws. length: approx. 20 m width: 100 mm Ijdpjw Uig Ujfx Ah Njtb

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Iodpfx Aoxak H Eoh Nstb Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, division: 22 mm Shank: 5 mm Iedew Uqpkopfx Ah Notb

Condition: used, New, unused, sharpened and used end mills and drills for CNC machines as shown. length: Miscellaneous diameter: Miscellaneous Itedpjvy Apijfx Ah Neb Shank: Miscellaneous mass: 12 kg Application: woodwork

Condition: excellent (used), Year of construction: 2009, CNC for complete processing of door frames / jambs , either or adjustable door frames in DIN norm Working width max 3.000 mm Working width min 480 mm Workpiece thickness max 98 mm Workpiece width max 280 mm Aggregates per side 2 Saw aggregates per side 1 diam. 400 mm Drilling supports per side 1 Drills per side 5 Aggregates longside 1 Milling aggregate with 2 spindles Aggregate tiltable in angle 45° Angle adjustment - programmable controller Width adjustment - programmable controller Itedpjw Sd Uuofx Ah Neb Conformity marking - CE mark Weight 2.500 kg

Condition: used, length: 950 mm width: 600 mm cutting height: about 60 mm engine: 2,2 kW connection: 16A / 400V Iodpfetvb Hhox Ah Njtb Mobile firewood saw for chopping strips, branches and other waste wood.

Condition: used, Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 1.5 kW Itodpfx Aotvb Hdeh Njb Connection: 220 V Mobile firewood saw for shredding battens, branches and other waste wood.

Condition: good (used), overall weight: 5,000 kg, working width: 1,300 mm, plate width: 1,350 mm, Veneer Press Bürkle U140 Working surfaces: 5 pcs. Intermediate plates: 4 pcs. Plate dimensions: 3050 x 1350 mm Working dimensions: 3000 x 1300 mm 8 hydraulic cylinders Max. surface pressure: 5 kp/cm2 Max. operating pressure: 348 bar Heating medium – hot water from central heating Cooling – cooling circuit with WILO pump, expansion tank, piping Iodpsxn Um Esfx Ah Notb Weight approx. 5000 kg Good technical condition of plates and hydraulics

Condition: used, Unknown test mandrel 50,000 mm with cone holder. Information 1: H=35.643 Itsdpfxew Ut D Re Ah Neb Statement 2: ø 50,000

Condition: used, D: 70 mm Itjdpfx Ahjwmbtxj Neb diameter: 70 mm drilling: 50 mm length: total 340 mm d: 50 mm L total: 340 mm

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm table height 870 mm milling spindle not interchangeable 30 mm clamping height 140 mm height adjustment 125 mm suction socket 2 x Ø 120 mm speed 3000 / 4500 / 6000 / 9000 rpm Colour RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Solid German mechanical engineering Table milling machine with one-sided swivelling fixed milling spindle for swivelling range from -5° to +45.5 Positioning control for height and swivel adjustment with zeroing of the height and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick tensioning device Push button for spindle start and stop Left and right rotation Cutter quick clamping device Fine planed cast iron table with rigid frame support Control panel at the bottom of rigid frame support Milling stop 216 total adjustment via handwheel and LCD display incl. cast stop plates and aluminium splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Milling spindle 30 mm, not exchangeable Iedpfx Ahofpb Nms Netb CE-conform GS tested

Condition: used, Plate cart or plate roller for easy handling of bulky plates. Iodpfxjwbdl Ts Ah Njtb