Notching tool

unbekannt 18 x 9 mm

Year of construction: 2022, condition: new, 1 x Niro-Tech poultry cone deboning system (single-line) with cutting table. Features auto ejection of empty carcass at the end of the line. Speed – Variable, up to 700 birds / hour. Csdshr Rp Djpfx Alaeha Overall dimensions - 5000mm L x 900mm W x 1100mm H approx. Electrical supply - 400v, 50hz, 3 phase.

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Cjdpfxslzizms Alaoha

Condition: used, Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Chsdpfxjhzcg Nj Alaea Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Condition: good (used), Additional knives will come with machine. Chsdpfjwx N Etjx Alasa

Condition: new, Year of construction: 2026, Poultry cleaning machine and Scalder for turkeys and geese Poutry cleaning machine ROB *Save time in cleaning larger quantities of poultry *The machine model is adapted according to poultry type- turkey/goose or chicken *Very easy to use and clean *Easy to move due to attached casters *Water tap for rinsing feathers *If the poultry is properly prepared, it will not get damaged in the machine durring processing 306.121,SČPROB 60 max 20 kg/2 Pieces, 60 Pieces per hour Dimensions 1030x1050x950 mm, Weigt 91 kg, 2,2 kW, 400V Scalder for turkeys and geese *Suitable for scalding larger poultry - turkeys and geese *Procesing of 2-4 oieces at a time *Turkey or goose scalding - 7 Minutes/72°-74°C *Safe to use and easy to clean *Easy temperature control- electronic thermostat *The thermostat reliably maintains the selected water temperature *The maximum possible temperature in the water tank is 90°C *Built in drain tap for emptying water *Transported on casters. Chedpfxjp At Rpo Alasa 307.220 KOH, 120l max. temp.90°C Dimension 1000x1380x1050 mm, Weight 318 kg, 10kW, 400 V

Condition: good (used), Year of construction: 2006, Stork FIM NT12+ HD Final Inspection Machine Poultry Csdsv Hx Nfspfx Alaeha Manufacturer: Stork Model: FIM NT12+ HD Year: 2006 Number of units: 12 Capacity: 8000-9000 BPH Machine Dimensions LxWxH: 1.365x1.205x2.750 mm Machine Weight: 750 kg.

Condition: new, 100 x 5 mm square edge steel 16 x16 mm round bar steel 18 mm L-beam 100 x 8 mm dimensions 400 x 290 x 280 mm weight 35 Kg Csdpfx Aljht R Hqoaoha

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Chjdpfxswhp Nde Alaea

Condition: new, Sind cutter 200 liters with vacuum Type: SVC 200 Csdpfx Ajul Tm Ejlaoha Completely made of special stainless steel 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Condition: new, Year of construction: 2025, The EQPB BabyPress is a hydraulically operated benchtop model. It is a robust and low-noise machine, specifically designed for the production of small parts. All manufacturing processes, from the hydraulic cylinder to the control cabinet construction, are carried out in-house. The advantages: - Basic version as a C-frame - Compact benchtop model - Ideal for prototypes and small production runs - Very short setup time - Functionally simple - Wide range of applications Standard basic version: - Upper platen guidance with highly precise roller guidance - Mechanical tool clamping system Promecam - Narrow table with individual V-tool holder (13x20) - Low noise level - Low power consumption - Easy operation Technical data: - Press force 6.2 t - Working length 285 mm - Clearance between the frames 230 mm - Installation height 215 mm - Overhang 70 mm - Ram stroke 100 mm - X-axis manually adjustable, travel range 250 mm - Pressing speed max. 9.8 mm/s - Retraction speed max. 50 mm/s - Motor power 0.7 kW - Dimensions (W x H x D) 350 x 1,075 x 390 mm - Weight approx. 0.2 t Cjdpfx Aljfi Tm Isasha Optionally, we also offer this machine with CNC control and/or a press force of 12 t. Please contact us for more information.