Hydraulic tube expander machine 12-15mm

GBS Portable Expander 3300mm 12,15mm

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Gbodpeuthz Tofx Acwok Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m Gsdpfx Acovc Aklswsbk dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Godpfx Aoghrgujcwsbk Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: ready for operation (used), Year of construction: 2015, - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM Gedpfx Acoxqtx Sewebk X-AXIS TRAVEL: 4000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 245 m/min WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Gbsdpfxolzizmj Acwek

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel Gbodpfx Aom Nb Riocwek >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,454 h, • Pressing force: 1000 kN • Bending length: 3060 mm • Usable installation height with manual or hydraulic tooling (Option: increased installation height): 350 mm (500 mm) • Usable installation height with TRUMPF Quick Clamp (Option: increased installation height): 430 mm (580 mm) • Max. distance between lower edge of press beam and upper edge of machine table (Option: increased installation height): 470 mm (620 mm) • Press beam tilting: ± 6.5 mm • Free distance between uprights: 3384 mm • Table width: 100 mm • Working height¹: 1049–1069 mm Speeds • Y-axis rapid traverse²: 200 mm/s • Max. Y-axis working stroke³: max. 15 mm/s • Y-axis return: 200 mm/s • X-axis: 500 mm/s • R-axis: 200 mm/s • Z-axis: 1000 mm/s Gbjdpfeyfxdwex Acwek Positioning accuracy • Y-axis: 0.01 mm • X-axis: 0.05 mm • R-axis: 0.1 mm Travel paths, backgauge zone • Y-axis stroke (Option: "Increased installation height"): 200 mm (350 mm) • X-axis travel: 600 mm • Max. backgauge zone in X-direction: 860 mm • R-axis travel: 150 mm Control • Standard scope: T3500T Multi-Touch control Connection data • Connected load (IEC) approx.: 20 kVA Dimensions and weights • Required floor space (length x width): 3607 x 1644 mm • Height (Option: increased installation height): 2370 mm (2700 mm) • Weight (Option: "Increased installation height"): 7700 kg (8300 kg) Paint / Color scheme • Structural body: White = NCS S 0505 R80B • Blue = approx. RAL Design 250 20 20 • Black = RAL 9005; Silver elements with RAL 9006 Equipment Extended machine equipment BendGuard: – Optoelectronic safety device enabling fast and safe bending – Maximum Y-axis rapid traverse speed is not limited in pure foot-operated mode – Tool height can be set easily and quickly with a rack solution and weight compensation – BendGuard can be easily slid back for lateral tooling processes without reinstallation – BendGuard is insensitive to shocks (disassembly), as the unit electronics are not connected Table supports (2 pieces): – Table supports are manually adjustable in Z- and R-directions and can be fixed with quick-clamp – Facilitate handling of large and heavy workpieces and can serve as storage surface for finished parts – Load capacity: 70 kg per support LED work area illumination front and rear: – Excellent illumination inside and in front of the machine’s working area – Modern LED technology: energy-efficient, cool-running, and very long-lasting DXF import: – Import DXF drawings into the 2D control system.

Condition: used, Year of construction: 2018, operating hours: 20,000 h, machine/vehicle number: A0261G0108, laser hours: 20,000 h, laser power: 4,000 W, warranty duration: 1 months, Equipment: centralized greasing system, documentation/manual, emergency stop, BTH IMPORT STAL Sp. Z o.o is offering for sale: TRUMPF TruLaser3060 L66 + TruDisk4001 Fiber source: TruDisk4001 (4000W) Working area: 2500x6000 mm Operating hours: 20,000 Laser-on hours: 42,000 Gbedpfxowf Epue Acwek The machine is in continuous operation. Visits and tests are welcome.

Condition: good (used), Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm Gjdpfxsr A H R Tj Acwebk -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

Condition: excellent (used), Year of construction: 1979, Rope Production line / Strand Rewinding line REDAELLI Line STABILISED CONCRETE PRE-STRESSING STRAND 3-wire and 7-wire strands which use with beams covering long spans, bridge elements, large pre-stressed elements, e.g. floor elements, piles, pre-tensioned and post-tensioned structures. - Year -1979/2005 - Pay of spool size - 800x900 mm - ⁠Range of strand production : Gbodpfx Aet Iq Hbecwek - 3/8 - 1/4 - ⁠1/2 - 5/16 - ⁠6/10-7/16 - ⁠7/10-9/16 - Coil Weight - 4.000 kg - ⁠speed - 40-60 m/min. - ⁠High carbon steel wire - ⁠PC Stand size: - ⁠6.4,6.9,9.3,21.5 mm - ⁠Electrical supply - 400 kW Line Consists : Wire Pay Of Wisting Unit Furnace Cooling System Traction Rollers Winding the Rope