TRUMPF TRUMATIC 500

TRUMPF TRUMATIC 500

Condition: ready for operation (used), Year of construction: 1995, punching force: 22 t, total height: 2,300 mm, total width: 6,000 mm, sheet thickness (max.): 6 mm, overall weight: 11,050 kg, product length (max.): 6,900 mm, number of axes: 2, CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine. • Condition: In working condition; normal signs of use (scratches/dirt, especially near punch head); floor wear visible • Max sheet thickness (steel): 6 mm • Note: Current tooling set is suitable for up to 1.5 mm sheet thickness • Max punch diameter: 76.2 mm • Max workpiece weight: 150 kg • Working range: X = 2500 mm without repositioning (4 m sheets previously processed using repositioning/extension tables); Y = 1250 mm • Axis speeds: X up to 90 m/min; Y up to 60 m/min • Stroke rate (nibbling): up to 900 strokes/min • Table/Design: Flat perforated work table; mechanical punching head with hydraulic/pneumatic lines; long material support arm; control panel on cabinet with display, controls, and emergency stop • Utilities: 400 V / 50 Hz / 3-phase; connected load approx. 17 kVA; compressed air 6 bar Ledpfx Abjz Azurjzohl Additional equipment • Large set of punches, dies, and tool holders (complete tooling set) • Large metal cabinet with shelving for tool storage • Metal scrap container on casters (under-table)

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Lhsdpfx Asxu Nc Iobzol Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Lhjdpfoq Ewi Aex Abzsl

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Lsdpfx Aboyz Ap Rszehl

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard Lsdpfx Aolz Rvlsbzjhl X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Sheet metal thickness - max.: 6.4 mm Punch diameter: 76.2 mm Travel range X-axis: 2,500 mm Travel range Y-axis: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed Simulation: 108 m/min Positioning speed rotary axis: 360 °/sec Lhjdpfxezk A Nts Abzol Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions: 6,400 x 5,800 x 2,100 mm Machine weight approx.: 11,050 kg Operating hours: 30,430 h

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Workpiece weight: 150 kg Lodpfezil Dksx Abzohl Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 pieces Tool change time: 1.5 - 6.5 sec Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes including tool cabinet with tools including Quick-Set

Condition: new, Year of construction: 2025, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine Lhedpfx Abochwa Djzol - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Lsdey U U Npspfx Abzohl Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Lodpfx Absxhfu Hozehl Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Ljdpfx Aow Imq Rsbzehl

Condition: ready for operation (used), functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL DETAILS Press force: 220 kN Max. sheet thickness: 6.4 mm Travel path X-axis: 2,500 mm Travel path Y-axis: 1,270 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360°/sec Punching diameter: 76.2 mm Minimum programmable increment: 0.01 mm or 0.01° Workpiece weight: 150 kg Tool stations: 15 pcs Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Lhodpfsx I Hh Rox Abzjl Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Pneumatic follow-up cylinders Small parts sensor for programmable part chute Parts box for finished parts Chip conveyor with container Scratch-reduced processing Air-cushioned mounting Additional clamping bridge Prepared for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Alignment system for loading stack with spreader magnets Manually movable scrap grid system