Sheet metal processing center

Trumpf TruBend Center 5030

Condition: new, Fully automated machines for the trapezoid roll forming, in various sizes. Please, contact us in order to receive further information as well as the technical documentation. Hedpjyr Nkbofx Am Asfh

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t Hfjdpfscubatex Am Aoh dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Hfjdpfx Amjxghngs Ash Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2024, New Aurepa ADR Trailer tank nitrogen, oxygen, argon, gas, cryogenics CRYOBASE tanker New trailer: Year of manufacture of trailer: 2024, made in Germany All necessary documents are available Used tank: Working pressure: 3.85 bar Capacity: 2000 L Delivery is possible. Hfedpfx Amot R R Uqj Ajh We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen, carbon dioxide, hydrogen, methane We would be happy to provide you with a quote or more information.

Year of construction: 2000, condition: ready for operation (used), This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine. Hjdpfx Ajx E Ef Nsm Ajfh Application Types Other Sheet Metal Machinery

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 49,641 h, stroke length: 200 mm, oil tank capacity: 100 l, travel distance X-axis: 300 mm, controller manufacturer: Bystronic, working width: 60 mm, bending force (max.): 40 t, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 100 mm, back gauge travel distance Z-axis: 955 mm, control type: CNC control, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, finger protection, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Model: Xpert 40/1030 Tonnage 400 kn Bending length 1030 mm Standard stroke [S] 200 mm Open height [D] 515mm Distance between side frames 1060mm Table Width 60mm Max. back gauge range X-axis 500mm X-axis travel 300 mm X-axis speed 1500 mm/s R-axis travel 100 mm R-axis speed 500 mm/s Z-axis travel 955 mm Z-axis speed 2000 mm/s Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm 1.1 Xpert 40/1030 1.2 ByVision Bending control with 22 Inch Full HD display and touch technology 1.3 Dynamic drive system (DDS) with Energy Saver 1.4 Hjdpextf A Isfx Am Aofh Automatic tool protection 1.5 Ergo foot switch 1.6 Rear protection sliding door electrically controlled 1.7 User manual (on CD) 1.8 Ambient air temperature 7°C up to 35°C 1.9 Voltage: 400/480 V, 50/60 cycles, 3 Ph (other parameters available on request)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) Hfsdsxmfc Uspfx Am Aeh - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: ready for operation (used), Number of axis: 6, nominal load: 90kg, controls: Engel, weight: 1.13t. Hedpfx Ask N Dnhsm Ajfh

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm Hedpfxstt Ecde Am Aefh bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Stainless Steel. Used! Good condition! Hfjdpfx Aehck S Ejm Ash Inlet: 6" - Outlet: 6"