Press brake

TRUMPF TruBend 7036

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, pressing force: 37 t, number of axes: 6, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: TRUMPF TASC 6000 (15") • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment Kdedpfxox D D Hye Aktjl • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: used, Year of construction: 2004, functionality: fully functional, Amada HFE 220- L Year of construction 2004 Kdsdpfxjuiwypj Aktel Laser height adjustment Working width 3100mm pressing force 220 tons with many tools

Condition: used, Year of construction: 2011, pressure 36 t chamfer lenght 1020 mm distance between columns 932 mm throat 150 mm stroke 120 mm useable dayligth 295 mm Y-working travel 10/25 mm/sec Y-rapid travel 220 mm/sec work height max. 1150 mm weight of the machine ca. 2.600 kg Kodpfxey Ig Rre Aktsdl dimensions of the machine ca. 1805x1330x2380 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Kdjdpfoy Igbdjx Aktol Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Accessories: - Light barrier - Foot switch - Side safety doors - Wila tool clamp - Trumpf TASC 6000 control - 6-axis backgauge

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Grip feeder system right hand side Kedpfx Akel D N Hvjtodl 1 Eccentricpress 90 kN 2 Narrow slide units 3 Standard slide units Working range: wire diameter range: 0,5 - 3,5 mm strip metal width: max. 32 mm feeding length: max. 170 mm output: max 250/min

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Kodpfx Ajyz Rwiektjdl Operating hours: 3,297 h

Condition: used, Year of construction: 2011, machine/vehicle number: B0702A0651, functionality: fully functional, operating hours: 30,858 h, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, pressing force: 36 t, operating speed: 220 mm/s, table length: 1,000 mm, overall weight: 2,600 kg, year of last overhaul: 2011, Equipment: CE marking, safety light barrier, The equipment has been fully maintained and is ready for immediate operation. The equipment has been in operation for 30,858 hours, and there are no operational issues (line laser not working). If you wish to use the line laser, it can be repaired for an additional fee. The cost is approximately 600 EUR. - Press beam OK Kodpfxeyytuhj Aktsdl - Block laser OK - Illumination (auto) OK - Line laser Not OK I would prefer the buyer to be familiar with the TruBend7036. If purchased in South Korea, I can provide free operator training.

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm Kodpfev S U Izex Aktedl

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Kdedpfx Aksyrf Dkotjl Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm Kedpfx Akstycg Setodl table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981