Vertical machining center

Stama MC531

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Itodpfx Aeur Hfzsh Nob

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Isdporz Nflefx Ah Notb Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Year of construction: 2010, 2 Number of axles 4 St. tool taper HSK 63 toll turrets 60 Iedpoqn A Rkofx Ah Notb weight 9600 kg

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Bar capacity 65 mm Speed 5,000 min-1 2 x 12-way turret with driven tool Turret 1 with Y-axis Isdpswh U D Hefx Ah Njtb Part collection device Belt filter system Chip conveyor Bar loading magazine IRCO Profimat

Condition: ready for operation (used), controller model: Fanuc 310i, empty load weight: 10,000 kg, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, swing diameter over cross slide: 950 mm, Spindle 1: 20 kW - 5000 rpm - spindlebore: 70 mm Ijdov Rwltepfx Ah Njtb Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis X1 movement: 165 mm Y1 movement: +50/-30 mm Z1 movement: 678 mm Spindle 2: 17 kW - 5000 rpm - spindlbore: 42 mm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven A-axis X2 movement: 165 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Iodpfx Asx A Eupsh Nstb Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2005, operating hours: 22,640 h, condition: ready for operation (used), controller manufacturer: FANUC, controller model: 21i-TB, This 4-axis STUDER S33 cylindrical grinding machine was manufactured in 2005. It features a dynamic balancing unit, Marposs push button insert, and includes 2 CBN grinding discs. The machine also comes with approximately 20 internal grinding mandrels and 3 collets. Consider the opportunity to buy this STUDER S33 cylindrical grinding machine. Contact us for more information about this machine. • Application: Prototype construction (no shift work) Itodpex D D E Aefx Ah Njb • Operating hours: approx. 24,000 • Control: FANUC 21i-TB • Extraction system not included • Annual maintenance • Center height: 175 mm • Center distance: 650 mm • Machine stand: Granitan S 103 • Grinding wheel: 500 x 63 x 203 mm • Linear measuring system • Spindle bore: 30 mm • Workpiece spindle speed: 1–1500 rpm • Workpiece table swivel: 8.5° • Infinitely variable taper angle (scale with 1° increments) • Grinding wheel dressing: radius, angle • Electrical interface for rotary dressing • Electronic handwheel • Maximum peripheral speed: 50 m/s • Constant cutting speed V • Pneumatic spindle lift • Pneumatic tailstock lift • Workpiece drive: 1.6 kW AC servo motor • Coolant pump: 100 L/min at 2.5 bar • Coolant supply via workpiece spindle • Changeover time internal/external grinding: 10 sec • Transition radius/chamfer/cylinder • Internal grinding spindle: 1–20,000 rpm • Foot pedal for movement with door open Additional equipment • Tailstock removal device (included) • PCD dressing plate R 0.5 • Dynamic balancing device with balancing sensors • Grinding detection • Marposs probe insert

Condition: excellent (used), Year of construction: 2011, CNC lathe Takisawa NEX-906 with Y-axis Itjdpfxjxtufle Ah Nsb

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control FANUC 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Itodpfx Ahovzcplo Neb #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Year of construction: 2000, condition: used, serial number 143-86 x-travel 550 mm y-travel 300 mm Iedpfxsr D Tu Ds Ah Notb z-travel 425 mm Number of working hours 58046 h cooling Innen nein max. 10.500 nein control Simens Sinumerik 810D weight 4600 kg