Cylindrical grinding machine

Studer S40-4

Condition: good (used), cylindrical grinding machine Fsdpfstrgndox Ac Nopc

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement. Fpodpew T Sd Tefx Ac Nec

Condition: used, grinding diameter 250,350,450 mm grinding length 1000 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min Fpsdpfx Acjv I Eq So Nsc 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±8 ° longitudinal feed of the table 1300 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4,2 x 2,0 m Ready for delivery, with 12 month warranty in germany and neighbouring countries! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! -Digital display in 2 axes. Resolution x-axis 0.5my -Modern workpiece headstock with cone MK5 -Modern tailstock with cone MK3 -Modern hydraulic unit -Paper belt filter Further accessories on request

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Fjdpfx Acjtqf Rzs Nspc Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: used, Cylindrical grinder STUDER S20-2 Fpjdpsxrg Hxefx Ac Njc

Condition: like new (used), Specifications Manufacturer GLEASON Model 104 Fpsdpfx Acoxtpk Ao Nsc Condition Used Serial Number 631406 Stock Number DCN1749 Max working diameter 432 mm Module max 8,5 Description Equipped with change gears books

Condition: used, Year of construction: 1989, functionality: fully functional, workpiece weight (max.): 20 kg, grinding length: 650 mm, grinding wheel diameter: 350 mm, total width: 3,400 mm, total length: 3,450 mm, total height: 2,000 mm, grinding diameter: 80 mm, grinding spindle motor power: 12 W, overall weight: 1,900 kg, For sale Studer S 20-4 CNC slab grinder Technical data: Range of motion: X: 80 mm Z: 650 mm Table stroke length: 1-650mm Grinding disc diameter max 350mm, Disc bore 127mm Speed: 1600, 1975, 2000 /min Maximum workpiece weight: 20kg Controller: Siemens Sinumerik 3 Power: 12 kW Year of manufacture: 1989 Dimensions: Machine weight: 1900 kg Fpodpfxovdyg Ts Ac Noc Machine dimensions (H, W, D): 3400x3450x2000

Condition: used, Year of construction: 1998, centre height 125 mm centre distance 400 mm Control FANUC 21i Capstan diameter max. 406 mm wheel dimensions 406 x 127 x 40 mm workpiece weight 30 kg longitudinal slide -travel 483 mm cross slide - travel 254 mm total power requirement max. 20 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 3,0 x 2,0 x 2,1 m including 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlled incl. C-axis incl. Quick-Set Probe including Sensitron including Magnetic Jaw including hydraulically foldable dresser Fpodpfx Aoxwdwfec Noc including other small accessories including documentation without a coolant system, as it was previously connected to a central unit Power On hours approx. 71,000 h Spindle hours approx. 25,900 h

Condition: new, :VL 1100A x-travel:1100 mm y-travel:600 mm z-travel:600 mm table-size:1280x600 mm max. table load:1000 kg distance spindle center to column:630 mm distance spindle center to table:100-700 mm rapid traverse in x-y-z axis:36/36/30 m milling feed range:1-10.000 mm/min :10.000 1/min (direkt) spindle drive:11/20,4 kW positioning accuracy:+/- 0,010 mm repeating accuracy:+/- 0,008 mm tool taper:40 BT max. tool diameter:80/130 mm max. tool weight:8 kg max. tool length:300 mm dimensions:4.920x3.510x2.850 mm weight of the machine ca.:7,25 t Brand-new CNC vertical machining center with CNC control Siemens 828D with Shopmill. Incl. the following standard accessories: CNC control Siemens 828D with SHOPMILL including 2-year warranty 1 piece coolant system 1 piece automatic 20-fold tool changer (Model VL-700), Type ?ARM TYPE ATC? 1 piece automatic 24-fold tool changer (Model VL-900, VL-1100, VB-1000, VB-1200, VB-1600), Type ?ARM TYPE ATC? 1 piece Halogen Machine Lamp 1 piece alarm / indicator lamp rigid tapping 1 set of tools 1 piece chip conveyor (chain) 1 piece tool set (water gun, air gun) Fjdpfxoi E Alze Ac Nepc 1 set foundation blocks and fixture screws heat exchanger for electric cabinet automatic lubrication system full enclosure guard automatic power off Spindle speed of 8000 U / min (Model VL-700, VL-900, VL-1100, VB-1000) Spindle speed of 6000 U / min (Model VB-1200, VB-1600) linear guide (VL-Serie) from THK or Rexroth 1 set of operating manual with spare parts list in German language 400V, 50cps, 3 phs CE version incl. CE Declaration of Conformity belt drive with 10.000 U/min door interlock 8,4? Screen spindle chiller coolant through spindle center tool setter (Blum) Warranty: 12 months More information can be found in the Appendix.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,574 h, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, total height: 3,235 mm, overall weight: 13,500 kg, product length (max.): 5,000 mm, This 3-axis DOOSAN MYNX 7500 was manufactured in 2020, featuring a Heidenhain TNC 620 control with a TS 460 probe. It has a table size of 1600 mm by 750 mm and a maximum spindle speed of 12,000 rpm. With dimensions of 5000 × 4050 × 3235 mm and a weight of 13,500 kg, consider the opportunity to buy this DOOSAN MYNX 7500 vertical machining centre. Contact us for more information. Fpsdpfxjx U Dtwj Ac Nec • Table Length: 1600 mm • Table Width: 750 mm • Spindle Taper: ISO 40 dual contact • Maximum Spindle Speed: 12000 rpm Dimensions Machine Depth 4050 mm