Veneer press

Sormec-Italy P-120 öko

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Lhjdpfx Afsv Si Szjtsi Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1997, - Edge banding unit - Cutting unit - Milling unit Ledpfx Aod Inktoftohi - Fine milling unit - Scraper blade - Buffing unit

Condition: excellent (used), Year of construction: 2019, MAZAK QUICK TURN 350MB 1250U Max. swing diameter: 830 mm Max. turning diameter: 420 mm Max. turning length: 1,250 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Machine is equipped with: - CNC control Mazatrol SmoothG - SMW three-jaw chuck KNCS 400, diameter 400 mm - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders Lhjdpfxsy Igz Dj Aftoi - 2 pcs. driven tool holders

Condition: good (used), Year of construction: 2011, Internal flange dimensions 2340 x 1340 mm Maximum panel dimensions (20mm thickness) 2340 x 1240 mm Working chamber height 60 mm Total thrust 300 t Lsdpfx Afetwba Sotehi Maximum specific working pressure 5 kg/cm2 Press cylinders No. 6 diam 140 mm stroke 250 mm Lower moving platen (closing movement from bottom to top) Opening between press platens 230 mm Side load 1400 mm Pvc roller uncoiler Double loading table

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed Lhedpfx Aehlp D Neftei -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Lhodpfx Afehgiuhetji Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe Lsdpfx Afsyh Hwuotohi - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: good (used), functionality: fully functional, double tenoner, double drill, step by step Equipped with: Ljdow A A E Ispfx Aftohi 1+1 saws 1+1 milling group 1+1 drilling group Max length: 2500 mm

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 Lhjdpfxsqgcdto Aftji X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH

Condition: like new (used), Manual profile grinder UTMA model P20 Lhedpfxsff H E Re Aftoi