Veneering press

SCM SERGIANI GS-A

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed Hnedju Rl Ruopfx Aater max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turn-over device * 2 tables with automatic variable pin system * With Teflon coating for pre-glued foil * Foil laying system for the pin table (pre-glued foil) Hjdpfxoxbcuds Aatjnr * Heating plate size: 2800 x 1500 mm * Maximum workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil paternoster storage, 3.2 m height with 14 suspension rods * Siemens S7 PLC control * Operator panel for PLC control: SIEMENS TP 270 (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Maximum chamber pressure: 6 bar * Maximum press opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40 / 60 mm * Max pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Hsdpfx Aaeg A D Anjtonr Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Hsdpfx Aajyy A Iqstsnr Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt outfeed brush group Hodpfx Asr Iyvmoatsnr blower group on outlet

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Chain tool magazine with 33 places - centre distance 120 mm Hsdpfjy U Naiex Aatsnr Flexible front unit protection for loading unlimited Y-size (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max feeding speed 200 m/min • Electronic speed control 30 - 200 m/min • Max working width 250 mm • Minimum working height 12 mm • Max working height 100 mm • Spindle speed 5000 & 6000 r.p.m • Spindle diameter 50 mm. Hnedpfxjyzdtkj Aatjr For a separate fee, it can be dismantled and loaded onto a transport vehicle.

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Hsdsyr Tx Aopfx Aatsnr Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Year of construction: 1980, condition: excellent (used), planing width 310 mm planing height 300 mm four-sided planing height 200 mm bottom head motor 15 kW upper head motor 22 kW right head motor 7.5 kW left head motor 11 kW feed motor 7.5 kW electric height adjustment Hjdeiqflbjpfx Aatsnr smooth change of feed speed

Condition: ready for operation (used), Year of construction: 2005, A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible. Hnsdpoywlpxsfx Aatsr