40 kVA spot welding machine

Schlatter 1MX121T25/P1

Condition: excellent (used), Year of manufacture: 1991 Nodpfx Adswq Dpqo Nskt Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

Condition: ready for operation (used), technical Details: Speed - 130m/min. , Year - 2006, run out table - 6 m Wire diameter range 4-12 mm Nkedpotndgpofx Ad Net

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Nkedpfxokvnums Ad Not Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm Nodecxxycopfx Ad Njkt dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. Nedpfx Ajvr Eh Esd Nokt The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW Njdpjuv Eg Hofx Ad Njkt - el. voltage: 3 x 400 VAC - controlled by: PC - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm - machine is operated by two workers

Year of construction: 1999, condition: used, pulling force - max. 6,0 t max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m Nksdpfed Il A Nox Ad Njt

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Nododzqblepfx Ad Nekt Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). Nodpfx Adjtvpile Njkt We also have a number of single point welding machines for steel wires.

Condition: good (used), 16 pieces tool holder external machining Nedpfx Adeikn E Ho Nokt 41 piece tool holder internal machining