Multispindle Drill

SCHEER DB

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Dodpfsv Trlmjx Ab Tjla Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. Dlsdpfed Ixbzex Ab Tja OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Universal dowel boring machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with built-in oil damping Height adjustment 80 mm Drilling depth 80 mm With chassis Weight 420 kg Availability: short-term Location: Flörsheim Dlsdjxx D D Ijpfx Ab Tsa

Condition: used, functionality: fully functional, Scheer DB 22 double-sided line boring machine, 2 drilling motors of 1.8 kW each, 32 mm pitch, 21 spindles per beam, good condition, dimensions 3100 x 1100 x 1800 mm, portal passage 850 mm, weight 345 kg Dljdpfsw Adrcex Ab Tja

Condition: excellent (used), Veneer press JU 60 2200 x 1200 mm heating plate damaged (see pictures), heating plate works Dljdpfx Absmhguae Tea year of construction 1965, heating 12 kw Loading costs (forklift rental approx. 500 €)

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Dodpfxoh U Damj Ab Tola Unfortunately, we cannot answer inquiries without complete contact information.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 508678, drilling depth: 80 mm, total width: 820 mm, total length: 1,350 mm, total height: 1,400 mm, overall weight: 450 kg, number of spindles: 21, power: 2.2 kW (2.99 HP), Universal dowel hole and line boring machine, dowel hole drilling machine, dowel drilling machine Manufacturer: Scheer Year of manufacture: 1989 Type: DB-5 Weight approx.: 450 kg Machine number: 508678 Dimensions: 1350 mm x 820 mm x H 1400 mm Drilling beam length: 640 mm Spindle distance min. 32 mm, max. 640 mm Dledpfowuuxkox Ab Tea 21 spindles Drilling depth: 80 mm Drilling beam pneumatically swivelling Motor power: 2.2 kW

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210 Dlodpfed Ev Upex Ab Tja

Condition: refurbished (used), Year of construction: 1996, operating hours: 350 h, functionality: fully functional, Universal Dowel Hole Boring Machine DB 4 This used SCHEER Universal Dowel Hole Boring Machine DB 4 has been functionally tested (not newly painted). Worn parts/seals have been replaced, and the machine geometry was reset to ensure the highest precision. The SCHEER Universal Dowel Hole Boring Machine DB 4 is specifically designed for construction drilling, for series drilling in the 32 mm grid system, and for drilling fittings of various kinds; it enables all these tasks to be performed quickly, precisely, and with minimal setup times. Easiest operation via symbols and 4 program preselection controls for switching to new working processes in seconds. Central adjustment of the removable side stops always ensures flush alignment at the front edge for precise drilling of left and right workpieces. It does not matter whether the parts are cut to size or in square. The dowelled corner connection is always flush—both at the edge and at the CNC machines—just as simply and quickly as with a SCHEER DB 4. Safety clamping device across the entire table width, clamping of workpieces directly at the drilling bar. Stop rail with three adjustable flip-stops. Continuous table supports facilitate feeding and drilling of long workpieces; foldable workpiece support tables make series and fitting drilling easier. 2 drilling units Dledpfowq S E Hox Ab Toa Drilling motor Type BM 602-230/400 Volt, 50 Hz, n = 2860, 2.2 kW power 25-spindle attachment gearbox Spindle spacing 32 mm (other spindle spacings on request) For surface and face drilling. The vertical drilling unit is equipped with an oil brake for tear-free drilling of series holes. The control cabinet of the machine has been completely rebuilt and converted to the new SIEMENS LOGO control system. This ensures the operational safety of the machine for the future! Portal passage: max. 950 mm Working length: max. 2360 mm With pneumatic comb adjustment

Condition: used, Scheer Type DB 5 dowel hole drilling machine for precise and fast drilling of dowel holes (horizontal and vertical) in solid wood and panel materials. The machine is ideal for series production in furniture construction as well as for precise joints in interior design. Includes a comprehensive range of dowel drill bits. drilling spindles: 21 Dledpswp E Uxjfx Ab Tsa division: 32 mm passage width: max. 1.000 mm Pivot: pneumatic

Condition: good (used), Code: 0117 Brand: GRIGGIO Model: PSA 520 - CE Standard Automatic thickness planer for wood, joinery, furniture, furnishings, sawmills, plastics, composites and various materials - CE Standard Shaft with Tersa cutters Working width mm 520 Dlodpfswiif Isx Ab Tea Min/max working height 3/300 Useful thickness mm 8 N° 4 Tersa cutters Variable feed speed mt/min 5/21 Automatic table lifting Motor Hp 5,5 3 rollers (1 infeed / 2 outfeed) Overall dimensions mm 1050 x 1000 x 1150 h Weight kg 725

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Dlodpfx Absw I Um Hs Tsa Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 1985, Scheer DB5 row drilling machine Year of manufacture: 1985 - 380 Volt - 21 spindles; 32 mm spacing Dlsdewv Uy Djpfx Ab Toa - stop ruler - various dowel drills - portal opening 1056 mm - 2.2 kW

Condition: used, Used machine Dlodpfx Abewpm I Ho Tja Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds Dlsdpew Nabxsfx Ab Tsa 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW