Boring mill table

Scharmann

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Ibjdpfjzuzpajx Afuja Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: excellent (used), DOERRIS SCHARMANN Manual Pendant Machine Hand Pendant Machine Control System Iodpow Iqz Tofx Afuoba

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Ijdpfx Afoygx D Hsujba Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: ready for operation (used), Year of construction: 1993, swing diameter 1400 mm faceplate diameter 1500 mm Control Sinumerik 850T work height max. 1400 mm Tool changer 12 stck. workpiece weight 5 t Isdpfxjvxa Tps Afuoba YEAR OF CONSTRUCTION: 1993 Mechanical overhaul: 2010

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex-works: Bench drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2010 Spindle 125 mm Metric 80 / SK 50 spindle mount Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Spindle / table installation height 1400 mm Table longitudinal travel 2500 mm Ijdpfezu I Eusx Afujba Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm For Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter boring head Various other accessories Weight 21 tons Price: EUR 9,500.00 plus VAT, ex-works.

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm Ibedpfey Dvlqjx Afuja cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: used, Year of construction: 1994, spindle diameter 125 mm x-travel 2000 mm y-travel 1600 mm Control Siemens 840 C Iedpfxeztfwxe Afuoba z-travel 1400 mm 600 mm ja total power requirement 40 kW weight of the machine ca. 27 t

Year of construction: 1970, condition: ready for operation (used), A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible. Ibsdpfx Afoxyk Tlouoa

Condition: ready for operation (used), Scharmann - WB 80 / Heidenhain digital display ND 780 -Travel ranges X/Y/Z 1300x1200x1200mm -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 tons -Spindle mount MK5 -Automatic feeds 0.053-6.35mm Ijdpfx Afjztyi Nsusba -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant system -Various accessories / tool holders etc. Errors and omissions excepted.

Condition: used, Year of construction: 1994, x-axis 7.300 mm y-axis 3.100 mm z-axis 1.250 mm control Heidenhain surface area B 2500 x L 7000 x H 750 mm no. of flutes 13 Stück flute distance 200 mm groove width 28H8 mm max. workpiece weight 4 t/m² drive capacity - main spindle 40 kW tool taper ISO 50 max. spindle tunring speed 4.000 U/min work spindle adjustment 3600 mm stroke senkrecht 1.250 mm spindle diameter 120 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Double-column gantry: Gantry traverse speed 0–6,000 mm/min Feed rate 12 m/min - Heidenhain control system with handwheel - Spindle extension (VFL) - Angle milling head (WFKU) - Tool magazine - Auxiliary equipment magazine - Schmipke cooling system - Coolant tank - Chip conveyor - Hydraulic unit - Oil cooler - Operator platform Ibsdpfszhcinjx Afusa - Comprehensive documentation available - Note: Operating conditions and installation layout in the appendix Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.