Profile bending machine

Roundo C-9000 Beam Bender

Condition: good (used), Technical data: Isdpoxruvzefx Ahvohw Working length: 2050 mm Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm Ihsdpehzbipefx Ahvew - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t Ihjdpfxeu Icc Ao Ahvew machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers Ijdpfx Ahjv Ab Dqevehw - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: excellent (used), Year of construction: 1983, overall weight: 35,000 kg, Energy of blow: 3 600 kgm Ram weight: 1 250 kg. Max. ram stroke: 800 mm Number of strokes per minute: 110 Total weight: 35 ton Ihodpfxetgpdzs Ahvsw Anvil weight: 24 ton

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm 7 T-Nuten laengs fuer T-Nutensteine: M 30 T-Nutenabstaende zueinander: 263 mm Ihjdpobn Amfsfx Ahvjw Gesamtlaenge: 6230 mm Plattenhoehe insgesamt: 350 mm Gewicht: 11 t

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Ihedpfx Ahedrtalsvsw Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, Year of construction: 2004, The bending press is made in 2004 in Turkey, in the ERMAKSAN factory. The folding press is in good condition, sold with tools. The machines are connected and can be tested and inspected. Specification: Model. Year: 2004 Working length: 2600 mm Bending capacity: 80 T Axles: Y1-Y2-X Tools: Yes Weight: 5.5 T Ihjdpfxsq U Sdre Ahvjw Motor: 7,5 kW If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; Ihodpfxjp Stgnj Ahvjw - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, big Tube and profile laser cutting machine. Ihodpjmxl S Aofx Ahvow up to diameter H profile till 12 meter tube or profile lenght laser head depend on material thickness. offer by request. installation and training include.