Band saw machine

CORMAK HBS260 + 2 piły M42 + 5L Emulgol

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg Dsdpfx Aolb I Dajkvjwa dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW Dwedpfx Akeudi Unjvoa POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: used, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Subject to price changes, errors, printing and typographical mistakes excepted. Dwodpfx Akewzzgnjvoa

Condition: new, – Semi-automatic – Hydraulic – 2 speeds – Double miter – Hydraulically adjustable saw pressure Djdoh Razfjpfx Akvswa – Cooling – Saw blade 2730 x 27 x 0.9 mm – Foot pedal control – Emergency stop – Documentation – 400 V

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Dwsdpfx Akjtu Hy Ejvea Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 35 + 70 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m Double miter metal band saw, GBS 250 Super AutoCut (20413) - Miter cuts up to 60° left and 45° right - Ball bearing rotary table Quick clamping device Solid, large material support Djdpfx Ajurc S Rekvewa Automatic cooling

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device Dodpfx Aop Scqyokvewa -Band tension control -Electr. Automatic cooling

Condition: new, Year of construction: 2026, CORMAK Z5020 BF Vario Column Drill Press is a versatile and modern metal drilling machine designed for intensive operation in industrial plants, locksmith workshops, and maintenance departments. The machine provides excellent stability, precision, and high working comfort thanks to stepless spindle speed adjustment and an ergonomic design. Main advantages of the machine Stepless spindle speed adjustment – a range of 190–2700 rpm allows optimal adjustment of parameters to the type of material being processed. Rigid machine body construction – minimizes vibrations and improves drilling accuracy. Height-adjustable worktable – precise rack adjustment and the possibility of tilting within a range of ±45°. Electronic speed indicator – provides real-time control of drilling parameters. Laser pointer and LED lighting – facilitate tool positioning and improve visibility of the working area. 100 mm machine vice included – the machine is ready for operation immediately after setup. Construction and technology The CORMAK Z5020 BF Vario column drill press is equipped with a stable 70 mm diameter column and a wide 480 × 290 mm base, ensuring excellent support and rigidity of the entire structure. The standard MK2 spindle features a 120 mm stroke, allowing deep drilling without the need to reposition the workpiece. The worktable design enables rotation and tilting, allowing the operator to precisely adjust the position of the workpiece according to the machining operation. Precision and work efficiency The powerful 750 W motor and maximum drilling capacity of 20 mm enable effective machining of most metal materials. The electronic speed indicator and drilling depth stop provide full control over the process. The long column and large table height adjustment range (660 mm) allow machining of taller workpieces and the use of tools with larger reach. Applications The Z5020 BF Vario model is a metal column drill press recommended for: mechanical and locksmith workshops, maintenance departments, light and medium industry, prototype work and single-piece production. Standard equipment 100 mm machine vice Laser drilling pointer LED work light Electronic speed indicator Three-arm spindle feed lever Drilling depth stop Worktable with rack height adjustment Technical specifications Parameter Value Maximum drilling diameter 20 mm Spindle speed range 190–2700 rpm Power supply 230 V Spindle taper MK2 Maximum spindle stroke 120 mm Spindle-to-column distance 170 mm Spindle-to-base distance 1060 mm Table height adjustment range 660 mm Column diameter 70 mm Table dimensions 280 × 280 mm Base dimensions 480 × 290 mm Motor power 750 W Djdpfxsvuf Iks Akvowa Machine height 1650 mm Weight 75 kg

Condition: new, cutting diameter 255 mm saw band length 2765 x 27 x 0,9 mm table height 950 mm 18-110 m/min 255 mm capacity 90 degrees: square 240 mm capacity 90 degrees: flat 300 x 180 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm capacity 60 degrees: round 135 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm capacity 45 degrees: round rechts 180 mm capacity 45 degrees: square rechts 160 mm capacity 45 degrees: flat rechts 180 x 100 mm Dwodpfx Akjt I D Tusvsa 1,5/1,8 kW 350 kg 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: new, saw blade diameter 355 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 120 x 106 mm capacity 90 degrees: flat 102 x 197 mm 25,4 mm connected load frequency 230 V total power requirement 2,3 kW weight of the machine ca. 28 Kg Dimensions (LxWxH) 0,6 x 0,35 x 0,45 m Dwsdpsupw Tkefx Akvea Machine for cutting pipes and profiles made of steel, light metal, Plastic, non-ferrous metal and composite materials.