Double-row bench drill

REMA R - B 13

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm saw band length / mm table height / mm Csdoxbh Hfepfx Akpsrc

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm Codpfx Aksgyy I Ajpjrc spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 Cjdpfx Aox Ada Rekporc - Coolant system - Operating manual Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 34, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, controller model: FANUC, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 10,000 rpm, spindle speed (min.): 80 rpm, table height: 560 mm, table load: 300 kg, tool diameter: 80 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Crodpsu T Hg Tefx Akpec

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Crsdev T Un Djpfx Akpsc Machine documentation is available.

Condition: ready for operation (used), A mint-condition 2-axis precision lathe Knuth is available. Turning diameter over bed/support/without bridge: 800mm/570mm/1035mm, max. workpiece length: 1500mm, bed width: 400mm, travel X/Y: 420mm/230mm, top slide swivel range: 70°, speed: 1600rpm, spindle bore: 105mm, rapid traverse X/Z: 2m/4m/min, quill diameter: 90mm, quill stroke: 235mm. Machine dimensions X/Y/Z: approx. 3250mm/1150mm/1950mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Crsdpfx Aexx Udrokpsc

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Credpfxjxq R Evj Akpec Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 2001, Mori Seiki SV-500/50 4 Axis Vertical Machining Centre with Mori Seiki MSC-501 CNC Control, Table Size 1100mm x 600mm, 40 Tool ATC, BT50 Spindle Taper, Cool Jet 70 - 30 DF High Pressure, Coolant Filtration Unit, Filtermist FX7002 Oil Mist Extractor, Spindle Speed Max 6000rpm, Renishaw Tool Probe Eye, Machine Weight 7800kg. S/No. 1864 Includes Various BT50 Spindle Tool Holders in ATC and Boxes Cjdpfx Akex Nap Djporc

Year of construction: 1987, condition: ready for operation (used), A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible. Crjdpfx Ajxq Eyzjkpec

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis Crsdpfjx I A Awex Akpoc With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories MARCELS MASCHINEN CH