Vertical turret lathe
REM SC 35 CNC 1S

Year of construction

2018

Condition

Used (fully functional)

Location

Bacău

Machine data

Machine type:: Vertical turret lathe

Manufacturer:: REM

Model:: SC 35 CNC 1S

Year of construction:: 2018

Condition:: excellent (used)

Functionality:: fully functional

Operating hours:: 2,000 h

Price & Location

Location:: Calea Republicii 199, 600304 Bacau, România

Call

Technical details

Turning height:: 3,000 mm

Workpiece weight (max.):: 30,000 kg

Turning diameter:: 3,500 mm

Power:: 100 kW (135.96 HP)

Details about the offer

Listing ID:: A16133426

Update:: 28.01.2025

Description

TECHNICAL CHARACTERISTICS

1. Max. machining diameter mm 3.500
2. Min. machining diameter mm 0
3. Max. height of the part mm 3.000
4. Max. load on the table to 30
5. Table diameter mm 3.000
6. Table speed range rpm 2 ÷ 130
7. Main AC motor - turning kW 100
8. The maximum torque of the faceplate in
turning mode Nm 105.000
9. Ram vertical stroke (Z axe) mm 1.750
10. Turning ram cross section mm x mm 300x300
11. Horizontal stroke –X axe mm 2.000
12. Feed range (X and Z axe) mm/min 1 ÷ 6000
13. Rapid traverse (X and Z axe) mm/min 8.000
Laodstpnlwspfx Ac Isb
14. Feed motor torque (X and Z axe) Nm 22
18. Vertical stroke of the cross rail mm 2.700

CNC Equipment
1. Equipment type Fanuc

Overall Dimensions
1. Floor space m 8.5 x 6
2. Max. height of the machine m 8.2
3. Max. height over floor level m 7.4
3. Machine weight to 89

Tool Magazine
1. Number of tool magazines - 1
2. Number of tools/magazine - 16
3. Feed motor torque with encoder Nm 12
4. Tool change time sec. 25
5. Maximum weight of the tool holder
- for turning daN 100
6. Maximum length of the tool holder
- for turning mm 600

Documents

16133426-01.pdf

Seller

Registered since: 2016

10 listings online

Call

Send inquiry

Telephone & Fax

+40 334 4... show

+40 234 5... show

Fax:

These listings may also fit your interest.

Listing

Turntable Welding table Heinrichsglück - Mechacon Horizontaldrehtisch HDT10.000-P1.500

Soest

18,477 km

Turntable Welding table
Heinrichsglück - MechaconHorizontaldrehtisch HDT10.000-P1.500

Call

Listing

Bending machine horizontal SCHÄFER 4-Walzen Rundbiegemaschine

Ennepetal

18,536 km

Bending machine horizontal
SCHÄFER4-Walzen Rundbiegemaschine

Call

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Ledsuddcaepfx Ac Ijab Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

See details

Listing

Agios Athanasios

17,582 km

HYDRAULIC PRESS
MECAMAQPOV 350

Call

Listing

Portal - Machining Center WALDRICH COBURG MULTITEC 2500 AP

Germany

18,384 km

Portal - Machining Center
WALDRICH COBURGMULTITEC 2500 AP

Call

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 Lajdpovwgmmefx Ac Iob the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top.

See details

Listing

Crushing and screening plant Unbekannt Schotter-Aufbereitungsanlage

Oberleichtersbach

18,481 km

Crushing and screening plant
UnbekanntSchotter-Aufbereitungsanlage

Call

Listing

Machining Center - Horizontal DECKEL DMC 80 H duoBLOCK

Germany

18,647 km

Machining Center - Horizontal
DECKELDMC 80 H duoBLOCK

Call

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA Laedepumdcjpfx Ac Isb weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

See details

Listing

CNC Vertical Turning Lathe (VTL) BLANSKO SKD 50

Halberstadt

18,302 km

CNC Vertical Turning Lathe (VTL)
BLANSKOSKD 50

Call

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Lodeym Nfzspfx Ac Ioab Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Further information: Pickup magazine with 8 tool holder positions Automatic clamping of the tool holder in the ram 1x straight boring head 1x 90° angle head (not in the pickup magazine) 1x set of jaws The machine can be inspected under power.

See details

Listing

Capelle aan den IJssel

18,603 km

CNC lathe
Mori SeikiSL-15

Call

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Lsdpfx Asx Hp Iksc Isab Tool Turret: 12-Station Tool Size: 25 × 25 mm Equipment & Features Hydraulic Tailstock Tool Presetter 6.5" 3-Jaw Power Chuck Coolant System Machine Weight: approx. 4,000 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

See details

Listing

Vertical machining center JOBS 5 AXES LINX DESIGN

France

19,201 km

Vertical machining center
JOBS 5 AXESLINX DESIGN

Call

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1 JOBS LINX DESIGN gantry milling machine from 2007 CNC FIDIA C20 – Siemens linear motors – feed rate 50 m/min X 7200 Y 3200 Z 2000 TABLE 6000 X 2500 Lodjxtp Hwepfx Ac Ioab AUTOMATIC HEAD AXIS A-C A 200° (+- 100°) B 400° (+- 200°) SPINDLE SPEED 24,000 RPM HSK 63 – 27kW – cooling system ATC 20 tools WEIGHT 52T

See details

Listing

Milling Machines - A montante mobile FPT Industrie RONIN

Matelica (MC)

18,521 km

Milling Machines - A montante mobile
FPT IndustrieRONIN

Call

Year of construction: 2011, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 8000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min Lodpewl R Agsfx Ac Ieab TABLE SIZE: 2000 x 2000 mm TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm MAX ADMITTED LOAD: 15000 Kg HEAD: A/B AXIS AUTOMATIC ; CONTINUOUS ; ISO 50 ; 7000 rpm; 49 kW; 1180 Nm TOOL MAGAZINE: CHAIN-TYPE ; 80 POS CONTROL UNIT: HEIDENHAIN iTNC 530 ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; PORTABLE HANDWHEEL NOTE: WITH ROTARY TABLE 1500X1500 mm; MAX ADMITTED LOAD 15000 Kg

See details

Advertise here