Notching Machine

RAINER 250 / 8

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine Lhodpfxjrq D Ukj Afaof TNC310 Heidenhain control X450mm Y300mm Z300mm tool clamping hydraulic inverter on spindle SK40 machine in very good condition

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Lhodpfx Afsqakbrjaof Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: used, Year of construction: 1984, x-travel 2500 mm y-travel 750 mm z-travel 1000 mm table surface area 2550 x 800 mm spindle taper SK 50 control HEIDENHAIN, TNC 150 B Lhedpfx Afotqqnwoaef weight of the machine ca. 16 t

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 Lhodjd S Uf Sopfx Afaef bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg Lhjdpfxouhf Tze Afaef The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: excellent (used), Year of construction: 2008, For sale complete PVC carpentry production line, brand URBAN, composed of: *1. Welding machine at 2 ends; URBAN brand, model: AKS 5305-FF, serial number: 53372, year of manufacture: 2007, perfect working condition; *2. Channel milling machine; URBAN brand, model: WS 103, serial number: 790, year of manufacture 2007, perfect working condition; *3. 2-headed saw: brand RAPID, model DGS 100, serial number: 004606128, year of manufacture 2010, sold together with vacuum cleaner with bags, perfect working condition; *4. MACC rebar cutting saw, model NEW 275, serial number: 88266, year of manufacture 2008, perfect working condition; Lhodjucl Dcspfx Afaof *5. Pantograph brand URBAN, model MLA A23 – 100466321S, serial number: 528-0, year of manufacture: 2008, perfect working condition; 6. Upright milling machine: URBAN brand, model M7CRH-100149891, serial number 559, year of manufacture 2008, perfect working condition; *7. De burring machine with 2 groups of cutters; brand URBAN, model SV 280, serial number: 29342, year of manufacture 2008, perfect working condition; *8. Saw for cutting sticks: brand URBAN, model GLS 102; serial number: 102015; year of manufacture 2010, perfect working condition; The production capacity of the line is 30-50 units/8h (depending on the number of people serving the line). The line was used very little from 2010 to 2014, and not at maximum capacity. We can also sell individual machines on request from the line. Net price complete line 33.500 Euro + VAT, negotiable, FCA Oradea.

Year of construction: 2022, condition: new, Load capacity: 10.000kg Speed: 0.03- 1.6 rpm Lhsdpfx Asfxgp Uofaof faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test Lhjdpfxoxnvq Es Afaof © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: used, Year of construction: 2014, total height: 2,400 mm, total length: 4,500 mm, total width: 2,200 mm, Empty weight: 2.500 kg CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling Lhodpfx Afownhansaof 12 switch positions Software: BiesseWorks X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Details: - └ Description: Pallet with white control box does not belong to this machine - Year: 2014 - Documentation available: Yes - CE certificate present: No - Serial number: 60961 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 - Transport dimensions: 4500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2002, machine/vehicle number: V020113, operating hours: 43,000 h, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Tonnage 80 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Lhodpfsuwktnsx Afajf Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 9kw Weight 5750 kg Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control