NC compact centric clamp

RÖHM RKZ-M 125 L

Year of construction: 1962, condition: used, machine/vehicle number: 1790, creator: Karl Klink Model: RW 5 year of construction: 1962 weight: ca. 2500 KG machine. No.:1790 General / technical data: hydraulic horizontal internal broaching machine in a good working condition clearing stroke: 1320mm turning: 1 piece pulling force: 5000 KG at 3m/min (3000KG at 7m/min) Clamping tool: universal drawing head for flat shafts Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and spit trough) cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 4600mm x 600mm x 1900mm (without working area) Power supply: 380Volt / 50 HZ / 15A hydraulic motor: 4 KW Accessories / special equipment: - the machine is equipped with a universal pulling head for flat shafts Nsdpfx Absdl Uzkogedd - Coolant / lubricant system - without tool feeder - short oil and oil sump (approx. 900mm) Remarks: The machine is ideal for the production of keyways. On request broaches and mandrels can be supplied. The machine is ready to run under power in our warehouse.

Condition: good (used), Year of construction: 2007, - SIEMENS 840 D control - Bar capacity 65 mm - Main and sub spindle with speed 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Driven tool speed 4,000 rpm - Tool holder VDI 30 with drive according to DIN 5480 TRAVELS X1= 165, Z1= 220 mm Nedpfjuw Izvsx Abgsdd X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 3000 mm Measurements depth 2300 mm Measurements height 2700 mm Machine weight 9600 kg Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Number of spindles 1 Spindle speed range 20000 rpm Tool taper SK40 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Media Chip conveyor Yes Additional Equipment Chip conveyor, coolant system, tool chain magazine, internal coolant supply, extended chip flushing, rotating viewing window, mist separator, blast air, optical measuring probe, tool breakage control, flushing gun, 3D control, NC swivel rotary table, preparation for handling system, signal light, electronic handwheel, screen display. Optional accessories for sale: 48x aluminum clamping plates (own construction); 48x vices HSG5 from Ceratizit (WNT), 5x shelves (own construction), tools and holders This 5-axis DMG MORI DMU 60 EVO was manufactured in 2016. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm and 120-fold tool change. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40 bar. Ideal for complex machining tasks, the DMU 60 EVO represents a robust addition to any workshop. For more information about this vertical machining centre, please reach out to us. Ndedpfsw S N Igex Abged Application Types Milling

Condition: used, Year of construction: 1998, max. working diameter 20 mm max. working lenght 320 mm bore diameter 10 mm passage of spindle 24 mm Spindle speed 200 - 8.100 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. Nsdpfx Abevnwf Iegedd - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: used, turning diameter . mm turning length . mm Nsdpfx Aboqn A Rrsgjdd swing diameter over bed slide . mm

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm z-travel 508 mm Control Haas CNC Max. rpm 12.000 min/-1 power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm T-slots 16 mm max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 76 (152) mm max. tool weight 5,4 kg change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW weight of the machine ca. 3,42 t Nodpsxddrpofx Abgodd dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².

Condition: used, different types available Nodpfxodc A Sbs Abgsdd

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Ndjdpfx Abjixntwjgod Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Njdeiw Dlkjpfx Abgedd Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 98 h, Control Unit Brand FANUC Model Series-31i Main Drive Spindle speed range 10000 Ndodpfx Ajw Irmdobgod Media Chip conveyor Yes Additional Equipment Oil Mist Extractor This 5-axis FANUC ROBODRILL α-D21LiB5 was manufactured in 2018. Ideal for precision machining, this vertical machining centre ensures reliable performance. Consider the opportunity to buy this FANUC ROBODRILL α-D21LiB5 vertical machining centre. Contact us for more information. Application Types Milling