Complete sawmill (stationary)

Primultini 1300 SGB CFF IEB

Year of construction: 2003, condition: ready for operation (used), Used drum dryer manufactured by SAFEM, extracted from a line of gluten-free products. Fluid: Steam Design pressure: 12 bar Maximum operating pressure: 9,5 bar Test pressure: 24 bar Maximum operating temperature: 192ºC Volume: 4.55 m3 Kodpfx Asq Nmuwoh Njdg Pressure x Volume: 54.6 bar x m3

Condition: not inspected (used), Year of construction: 1984, Turning length max. 1200 mm turning Ø max. 250 mm 2 hydraulic scanning supports spindle motor 5,5 kW hydraulic motor 2,2 kW Kdodpfsp Dt Twex Ah Neg

Condition: excellent (used), Year of construction: 2019, Roland SolJet PRO 4 XR-640 Eco-solvent and cut-to-length printer - 1,63 cm wide CISS ink system - ink is about 40% cheaper. The equipment is very little used, is in production and can be viewed / tested. Printing speed up to 49,1m2/hour. Kdjdpfx Ahomcw Two Neg It has been designed for high production yet combines all of Roland's unique and innovative applications plus some new ones. Among its main features are quality and speed as well as the ability to achieve metallic shades, printing on transparent materials and a significant colour tone enhancement, making it the world's first utility to use Light Black outdoor ink. The Roland SolJet Pro XR-640 provides quality prints with EcoSol Max2 inks, strong colours with high durability. The ink has a very low odour. Best quality for indoor and outdoor at the most common width. Very high productivity with low maintenance. Maximum material width:1.625 mm; - Maximum print resolution: 1440 dpi; - Variable Droplet with 7 different droplet sizes; - A new generation of EcoSol Max 2, Nickel-free, eco-friendly inks; - Banding-free printing even at high speeds; - Evolved roll feed system; - Take up roll rewind system (works for printing and cutting); - Automatic maintenance & head cleaning system; - Built-in Heater/Dryer; - VersaWorks RIP Roland; - Variable data printing; - Print time and cost calculation; - New Light Black colour; White and silver ink; - Metallic Colours; Printing & Cutting; - Four different colour compositions; EXW old price 9900 euro - new price 7900 (without VAT in EU)

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Ksdpjd H Sc Eefx Ah Njdg Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: good (used), Year of construction: 1990, 4-shaft shredder from the well-known manufacturer Untha, type RS 30. 2 x 7.5 kW. The gearbox was overhauled and new cutter discs were installed on the shredder 3 years ago. Since then, it has hardly been used. Repair costs amounted to €5,300. Ksdexpn Hnopfx Ah Nedg

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. Kdsdpfx Ahsul Uize Njg 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². 1 press unloading basket with lateral evacuation pushers on lifting table. Line currently in operation, available second half of 2025.

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Kdedpfx Ahoff Sbio Nog Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: used, Year of construction: 1997, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing timer. Blade positioning device. Year of manufacture: 1997. Automatic annealing temperature control. Welding wood strip up to 100 mm. Kdedpfew Snpijx Ah Nog Bimetal strip up to 80 mm. Connection: 3 x 220 V. (3 x 400V available on request) Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Instructions and packing included.

Condition: good (used), Year of construction: 1998, Skid-mounted nailing machine P + K Pallet nailing machine P+K SNM-III-24-1250 Kjdpfxjuzh Anj Ah Nodg Intermediate drive with branding punch Positioning table Portal stacker Pallet size 600x800 - 1200x1400 mm

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Kdjdjv Dwirepfx Ah Nog