Spare parts for POREBA lathe TPK, TR135

POREBA TR135, TPK-90

Year of construction: 2022, condition: like new (used), Due to the planned closure of our laboratory in May/June 2026, we are offering laboratory equipment for sale in very good and excellent condition. The entire set is available. All equipment has been used as intended, regularly serviced, fully operational, and ready for immediate use. The offer includes, among others: LCS MS/MS, GC MS, fume hoods, spectrophotometer, shakers, laboratory refrigerators, digestion unit, water bath, laboratory furniture, and many more. This is an excellent opportunity for research institutions, universities, and companies in the biotechnology, chemical, and medical sectors to acquire high-quality equipment at attractive prices. Early reservation of individual devices is possible. Collection is available from May 2026 or upon individual arrangement. We invite you to contact us and inspect the equipment on site in Poland, Warmian-Masurian Voivodeship. Ledexmhfrjpfx Afaork

Condition: new, VKM supplies spare parts for Oswald and some Bezner-Oswald machine, BÖGLI bandsaws and replacement knives for various woodworking machines. Partly the parts can be delivered from stock. Lrodpfxeg Rn Avs Afask For the knives, send us your desired dimension and we can offer and supply them to you at a reasonable price. Send us your inquiry today!

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Lrsdpfjw U Uh Dex Afask Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm Lrsdpfx Afjt Hw T Soajk total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: used, Module milling cutter Module 8 20 degrees Length 1800 mm Diameter 120 mm inside 40 mm Lodpfx Aedklt Nsfaork

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. Lodpfery Trpsx Afaork W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg Lrodpfjh Ek Daox Afaek - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Welding rotary table Focker Strähler 8 tons 8000 Kg load capacity with hand and foot remote control Speed and inclination infinitely variable 0,02 U/min to 1,1 U/min diameter 1500mm height tilted to the middle 1170mm height horizontal 1400mm length 2400mm Lrodpfxef Ezdno Afaok width 1500mm condition optically and technically perfect, runs very quietly

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation Ledpfjdzp Tcex Afasrk - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: ready for operation (used), DANOBAT RTM 2500 – CNC Surface grinding machine | 2.500 mm Travel | 3.100 kg Table load High-capacity surface grinder designed for precision flat machining of large workpieces. Robust, accurate, and ready for demanding production environments. 🛠 Key technical features: • Max. grinding length: 2,500 mm • Max. grinding width (with 100 mm wheel): 900 mm • Max. grinding height (with Ø500 mm wheel): 1,000 mm • Table surface area: 2,500 x 800 mm • Max. table load: 3,100 kg • Electromagnetic chuck: 2,000 x 550 mm • X-axis travel: 2,650 mm at 1–30 m/min • Z-axis travel (cross): 800 mm • Y-axis travel (vertical): 1,150 mm • Z feed speed: up to 8,000 mm/min • Y feed speed: up to 1,000 mm/min • Positioning resolution: 0.001 mm • Encoder measurement on Z and Y axes ⚙️ Grinding head details: Ljdpfx Afohq Ui Ioajrk • Wheel diameter: 500 mm • Bore diameter: 203.2 mm • Max. wheel width with recess: 100 mm • Peripheral speed: 26 m/s • Nominal speed: 1,000 rpm • Grinding motor power: 15 kW • Total installed power: 30 kW ✅ Additional features: • Prismatic guideways with Turcite coating • Angular grinding head • Paper band filtration system • Hydraulic unit power: 4 kW 📌 Perfect for high-precision large-part surface grinding. A solid solution for manufacturers who require size, stability, and sub-micron accuracy.