Plasma cutting machine

PLASMA 3.000 X 1.500 mm

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. * Godpfxeviqybj Anksub

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Godpfjd Du T Isx Ankjub Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, For sale: Miller PipeWorx 400 Gsdpfex Rppcjx Ankeub 565 AMP (60% 500A, 100% 400A) 380 Volt 2013 Water-cooled Pulse RMD Programma memory Elektrode option Steel + Stainless Steel weldable Refurbished, tested, and serviced. Test welding possible Including 1,0-1,2mm feed rolls, 2x PRO5000 MIG welding torches, earth work lead with clamp, gas cable, transport cart, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from outside, with separate drive motor - Sliding table made from anodized aluminum with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) Gjdpfx Anex Hbruoksub - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - Integrated on/off switch on the sliding table - Motorized height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and the position of the rip fence - Swiveling operator panel at eye level - Quality Made in Italy - Crosscut length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Year of construction: 2013, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 3270 mm Guodpfx Asvhc S Henkeb Y-AXIS TRAVEL: 1550 mm Z-AXIS TRAVEL: 100 mm WORKING AREA: 3070 x 1550 mm ADMITTED LOAD ON TABLE: 920 Kg SOURCE: AJ2000 Fiber ; 2000 W CONTROL UNIT: AMADA AMNC3i WEIGHT: 11200 Kg OVERALL DIMENSIONS: 10028 x 2900 x 2000 mm NOTE: WITH LOADING/UNLOADING SYSTEM LKI 3015FLC-AJ YOM 2013; AUTOMATIC NOZZLE CHANGE

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm Gujdepm U U Nspfx Ankob * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Guodpsh Rabnjfx Ankeb Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Technical Data: - Cutting capacity at 90° (round): 250 mm - Cutting capacity at 90° (flat): 275 x 180 mm Gujdpjxup Rfofx Anksb - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm Guedpfst D Nz Aex Ankjb hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: ready for operation (used), Number of axis: 6, nominal load: 90kg, controls: Engel, weight: 1.13t. Gusdsk N Dnhjpfx Ankob