Modular milling cutters hob cutters

Piltz m0,4 U 2 x AAA

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Dwodpfot Akt Rsx Akvsa Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. Dwodpfx Ajy D Npiokvea with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 3ROLL 4000 X 6 MM, roller (bottom) diameter: 300 mm, roller diameter: 310 mm, roller length: 4,050 mm, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 11,000 kg, total length: 5,700 mm, total width: 1,500 mm, total height: 1,700 mm, type of input current: three-phase, working length: 4,000 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Thickness plate rolling 6 mm Pyramid 3 rolls with pre-pinch Dedpfx Akevn I Hcsvowa cylindrical plate rolling Conical plate rolling Rollers surface length 4050 mm Top roll 310 mm Side rolls 300 mm Datasheet power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton machine in working condition dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 Dodpfey D Ngzsx Akvjwa - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: excellent (used), Year of construction: 2000, Used Trumpf Trumatic 200r CNC punch press for sale: Dedpfx Akjvq N Ndjvswa Brand: TRUMPF Model: TRUMATIC 200 Year: 2000 Type: CNC Punching Machine Control:Bosch CC 220 Punching force (ton) 16.5 Movement X-axis (mm) 80 m/min Movement Y-axis (mm) 55 m/min Simultaneous positioning speed (X+Y m/min) 97 m/min Max. sheet thickness (mm) 6.4 Tool changing time (sec.) 1.5-6.5 s Number of tool places 15 Max. hole diameter (mm) 76.2Max. workpiece weight (kg) 150 Max. stroke rate (1/min) 420 Picture of punch samples: 6mm aluminium

Condition: used, Length each: 2045 mm (1 tool with slight rust marks, 1 tool with more pronounced rust marks) Dwsdscbnwcopfx Akvoa

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamping devices Metal table Used exclusively in single-shift operation Dsdpfx Ajul S Eajkvjwa Includes tools from WILSON TOOL 22726

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Dsdpfx Aezi Ra Rjkvewa Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Used CNC punching machine from Finn Power Type: C5 Travel range X: 2580 mm Travel range Y: 1270 mm Dwodpfx Aexphwyokvsa Punching force: 30 tons Including tools

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, I sell a decent massive pipe bender in very good condition Weight of the bender 4.5T+ about 1T wheels to work. Dwjdpfx Aoudlymekvea