Rolling machine

PICOT RPS 2006G

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller Dsdpfedktnvsx Ab Tocr - working position horizontal and vertical (optional) - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm - weight: 85 kg - dimensions: 530x420x500 mm

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm Dcodpork Sg Rsfx Ab Ter TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 440 mm UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW CONTROL UNIT: DELEM DA 65 WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Condition: good (used), Year of construction: 1990, throat depth: 420 mm, distance between stands: 1,530 mm, overall weight: 3,450 kg, total length: 2,100 mm, total width: 1,400 mm, total height: 1,900 mm, pressing force: 50 t, Bending length 2050 mm, capacity 50 to, gap between column 1550 mm, stroke 200 mm, throat gap 300 mm, motor 5 KW, back gauge motorized, dimension 2100x1400x1900 mm, weigth ca. 3450 kgs Dedpov Axpwsfx Ab Tecr

Condition: used, sweeping width 800 tenb. container volume 114 l total power requirement 3,0 kW 2759 m²/h max. 5232 m²/h Sweeper - scrubber dryer Djdpfog Ti Ihex Ab Tscr Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!

Year of construction: 2021, condition: ready for operation (used), A like new plasma cutter is available. Operating hours: 30h, open circuit voltage U₀: approx. 292V, output current I: 105A at 30A 92V–105A 122V at 92 or 122V under 30A, output voltage under load nominal HYP U₂ IEC U₂: approx. 160V at 100 percent power approx. 142–160V depending on standard, duty cycle at 30°C at 80 percent power 105A at X at 40°C, at 100 percent 94A or at other voltages, supply voltage input: three phase 3-PH multiple voltages possible 380–400V etc. U1 50/60Hz, protection class IP23CS, standards EN60974-1 EN60974-10 Class A GOST etc., power consumption P1: 14.9kW/h approx. 14.9kW, duty cycle at 40°C: 80 percent at 105A at certain voltages, 100 percent at slightly lower currents for example approx. 94A at higher voltages, other combinations depending on voltage and standard. Length with handles: 592mm, width: 274mm, height: 508mm, weight with torch 7.6m cable: 45kg. Table with sheet clamp, collection container and rail guide for the plasma cutter optionally available. An on-site inspection is possible. Dcodpfsxddaasx Ab Tor

Condition: new, Year of construction: 2013, functionality: fully functional, machine/vehicle number: Serial No: 50020385, overall weight: 380 kg, Model: ZF 2060 Part List No: 3100 019 059 Serial No: 50020385 Refereance No: X51534200029 Ratio Total: 2,519:1A kW/rpm: 0,535 Clutch Oil Pressure: 21,5 bar Mass Dry: 380 kg Dcsdpjvrc Uijfx Ab Tsr Oil Capacity: 21 dm3 Total 2 pcs are available

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg Djdpevncifefx Ab Tscr

Condition: used, Grindermak 150-06 Grindermak 150-06 New Punch press tool grinder based on the Amada Togu CNC grinder Dsdpfxsfuakce Ab Tecr Grindermak 150 06 / For sale Table Stroke/movement 180mm Distance between table and wheel (max) 230mm Z movement 0,0001-20mm Cutting wheel Diameter (max) 150mm Cutting wheel rotation 3400 D/dk Cutting wheel power 1,1kw-3000 D/dk Stroke engine (z) 400W Complete with touch screen. In stock. Amada Togu / Trumpf quick sharp type grinder / Quick grind / Quick set / Quick load/

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller Dsdpfxst Hmlqs Ab Tscr 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Djdpfx Abefz U S Es Tecr Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.