Gear Shaping Machine

LORENZ SN 4

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW Hfsdpfotycg Sox Aa Eei weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm Hfjdpfxsx Aq Egs Aa Eji width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *

Condition: new, Year of construction: 2024, The Just Lift cranes, models JL250 to JL750, from Just Lift have been developed to accelerate and optimize all processes related to lifting and logistics, increase productivity, and at the same time ensure maximum safety and ergonomics for the operator. - Motorized drawbar head guidance - Arm control with remote controls - Hydraulic lifting and extension - Anti-tipping system as standard - 100% electric Max. forward travel speed km/h 4.0 Max. reverse travel speed km/h 4.0 Lifting system, max. load capacity kg 250 to 750 Number of operators 1 Arm lifting speed mm/s 22.00 Arm lowering speed mm/s 15.00 Arm extension speed mm/s 7.00 Arm retraction speed mm/s 5.00 System pressure bar 125.00 Oil type ISO VG 46 Oil volume l 2.00 Weight without batteries kg 610 to 1,080 Total weight incl. 105/130A AGM batteries kg 680 to 1,146 Hsdpfx Aash Tx R To Esfi Length max mm 2,835 Length min mm 1,891 Width mm 980 Height, steering wheel/drawbar mm 1,229 Height max mm 3,030 Height min mm 2,313 Lifting height max mm 3,010 Wheelbase mm 1,000 Turning radius mm 1,050 Currently, we can only offer new equipment.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 27,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, overall weight: 21,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. Hfjdpex D Eh Ejfx Aa Eji • Working table: • Number of pallets: 2 (working/preparation area) • Pallet clamping surface: 1000 × 800 mm • Pallet weight: 630 kg • Axis travels: • B: 210° • C: 360° • Movements: • Acceleration (X/Y/Z): 7.0 / 6.5 / 6.5 m/s² • Resolution (X/Y/Z): 0.001 mm • Position tolerance (X/Y/Z): 0.006 mm • Position tolerance (A/B/C): 8 / 6 / 5 arcsec • Workpiece capacity: • Max diameter: 1000 mm • Max height: 1600 mm • Max weight: 2000 kg • Spindle: • Torque: 119 Nm (40% ED) • Tool changer: 60 positions • Coolant system: 980-litre high-pressure through-spindle with paper band filter • Availability: In excellent condition, available for demo (video available) Additional equipment • 7 extra pallets • Chip conveyor • Oil mist collector • Infrared measuring sensor • BLUM laser tool measurement • 3D Quick Set preparation • Cooling unit • Air blast through spindle • Maintenance kit (filters, wipers, installation tools) • Full manuals (English, Estonian, and digital copy)

Condition: ready for operation (used), Diameter range: 50 mm - 108 mm Hjdpfx Astqmryea Esfi Height range: 38 mm - 197 mm Production capacity: up to 500 c.p.m. No. of heads: 6

Condition: good (used), SUMMER SALE - UNBEATABLE PRICE: €9,900 Please read the technical specifications carefully. If the machine is a suitable investment for you, please provide your complete contact details with a valid telephone number and email address when requesting a quote. DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2-axis CNC milling machine With SIEMENS 810 D – ShopMill software (Buffer batteries replaced) Year of manufacture: 2001 Travel distances: X/Y/Z: 350 x 240 x 340 mm Spindle speed, continuously variable: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Draw-in bolt: DIN 69872 Drive power: 6.3 / 10 kW (100/40% ED) Torque: 55/80 Nm max. Universal swiveling/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feeds: 3,000 mm/min Rapid traverse: 5,000 mm/min. Input resolution: 0.01 mm Rotational range: 360 degrees Swiveling range: degrees Total power requirement: kVA Weight: approx. 1750 kg Technical data is non-binding! Hsdpoxz Rdaofx Aa Eefi Accessories/Equipment: Direct path measuring system for 3 axes Spindle drive via servo motor with toothed belt 2 gear stages Full protection enclosure with sliding door Swiveling control panel Coolant nozzles on the vertical head Coolant system Chip tray with coolant tank Electric handwheel Machine feet Machine light Serial interface RS232C, LAN (RJ45) The machine is perfect for prototype construction, toolmaking, training, mechanical workshops, weapon manufacturers, etc. It stands out due to its versatility with the additionally manually operated rotary/swiveling table, which allows for 5-sided machining. Condition: good to very good, from a vocational training center, see pictures. Can be tested while powered.

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm Hfsdpfxsvu E Nue Aa Eoi control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: good (used), Description: The machine is in good technical condition, with the possibility of testing by prior arrangement. Maximum turning diameter: 660 mm Maximum swung diameter: 660 mm Main spindle: Hodpfx Aey Amqzja Eefi - Speed range: 35–5,000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub spindle: - Speed range: 35–5,000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power supply: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flush cooling: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant - Tool magazine for 20 tools - B axis (positioned at 0.001° increments) - C and Y axes - Sub spindle angular position indexing - Synchronization of main and sub spindle - Tool presetting system (Tool Eye) - Front door locking - 20-position tool magazine - Complete cooling system - Interface for IC memory card

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, travel distance X-axis: 560 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: SmoothG, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets 2; Indexing 1° increments • Control: Mazatrol SmoothG • Coolant/air: Through-spindle cooling 32 bar; Through-spindle air supply; Niagara flushing • Functions: Tapping without compensating chuck (rigid tapping); G00 tilt function • Compliance: CE marking Additional equipment • Renishaw OMP 60 touch probe • Renishaw Inspection+ (Version 2022) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper Size SK 40 Hsdpfxox Enlls Aa Ejfi

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Hfjdpfx Aswvir Ija Eoi Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm