Center Lathe

Pfeiffer P 165

Condition: excellent (used), 16 shank mills with indexable inserts Manufacturer: Walter Weight: 9.5 kg Ljdpfedx D Tvjx Aiishh

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Lhedpfsv Rgzwjx Aiish Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Lodpfx Aed Eaukeiijhh

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) Lodoxacirjpfx Aiiehh - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: new, Bernardo Standard 165 D Lead and Feed Lathe Technical Specifications Distance between centers: 1000 mm Distance between centers over bed: 350 mm Distance between centers over cross slide*: 450 mm Distance between centers over compound slide: 190 mm Bed width: 180 mm Spindle bore: 40 mm Lsdsd Ri Ezspfx Aiijhh Spindle mount: DIN 55029, D1-4 Speed range: (8) 70 - 2000 rpm Range of longitudinal feeds: (40) 0.053 - 1.29 mm/rev Range of cross feeds: (40) 0.013 - 0.31 mm/rev Metric threads: (32) 0.4 - 7 mm Inch threads: (36) 4 - 60 TPI Tailstock travel: 110 mm Tailstock mount: MK 3 Motor output power: S1 100% 1.5 kW (400 V) Motor input power: S6 40% 2.2 kW (400 V) Machine dimensions (W x D x H): 1730 x 700 x 1340 mm Weight approx.: 514 kg * Bed length can be extended Scope of delivery • 3-axis digital display i200 with LCD • 3-jaw chuck DK11-160 mm / D4 • Faceplate 200 mm / D4, according to DIN 55029 • Fixed steady rest – bore diam. max. 60 mm • Follow rest – bore diam. max. 60 mm • Clamping plate 250 mm • Four-way tool holder • Shaft locking device • Protective device for tool holder • Slip clutch • Micrometer length stop • Coolant system • Extendable chip tray • Motor with magnetic brake according to CE standard • Foot pedal with braking function according to CE • Splash guard • Threading dial • LED machine light • Reducing sleeve • Change gears • 2 centering points • Base frame • Operating tools

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW Lhedeu Ix Hdspfx Aiioh tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm In good condition. Ledpfx Aiewah Rqoishh See data sheets for details.

Condition: used, Year of construction: 1969, x-travel 710 mm y-travel 250 mm z-travel 400 mm table-size 1200 x 300 mm control konventionell tool adaptor SK40 turning speed range 50 - 2500 U/min total power requirement 2,2 kW Ledpfx Aox I Sf Ujiijhh weight of the machine ca. 1,7 t dimensions 2,1 x 2,0 x 1,6 m Features: - Digital display - Coolant system - Huron milling head - Emergency stop device - Documentation

Condition: ready for operation (used), Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible. Lhjdpox Hz Rqsfx Aiioh

Condition: good (used), Year of construction: 1970, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 52 mm, turning diameter: 360 mm, center height: 180 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 750 mm, total height: 1,400 mm, spindle speed (max.): 1,750 rpm, spindle speed (min.): 60 rpm, overall weight: 1,800 kg, Conventional lathe, center high 180 mm, between centers 1000 mm, bore Ø 52 mm, 12 speed 60 - 1750 rpm, motor 4 kw, camlock 5'', ; equipement: coolant device, 3-jaws chuck Ø 200 mm, tool post MULTIFIX with 7 toolholders, steady rest, lamp, dimensions 230x115x165 cm, weight ca. 1750 kgs Lhsdpfxjx Dl Nve Aiieh