PRESS

PELLEGRINI

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Hnedewd N Rmjpfx Ahvji Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: refurbished (used), functionality: fully functional, Refurbished six-piston hydraulic platen press of Italian manufacture. Branded multi-layer press designed for easy wood veneering, supplied with warranty and service support. Veneering plate dimensions: 3000 x 1300 mm Pressure at full surface: 2.2 kg/cm² Total maximum pressure: 80 tons Number of hydraulic pistons: 6 Teflon MYLAR film on the plates Piped for water-based heating of the plates Option to install a hot water boiler Price includes a fully refurbished machine Hnjdovvbbcspfx Ahvji Price: 10,000 EUR excl. VAT The machine will be refurbished, set up, and tested. The refurbishment status and machine readiness for collection must be confirmed in advance! In stock at Telnice near Brno, Czech Republic Testing, demonstration, and operator training included as standard.

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Hodpfexrc Eqjx Ahveni Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: used, Platters 300cm/125cm Hnodpfx Ajyf Enijhvji divisible into 3 pieces 380V Cold press

Condition: like new (used), • condition - used, after inspection • manufacturer - ORMA • model - C4 • shelves measuring 250 x 120 cm • max. clearance between shelves 490 mm • shelves straight, clean, without dents/damage • 4 pistons with a diameter of 55 mm • max. pressure 150 bar • pump motor 1.1 kW • gluing time stopwatch • shelves heated with liquid • possibility of switching on and checking the device on site Hjdpfx Ahowlwr Ieveni

Condition: refurbished (used), functionality: fully functional, Refurbished four-cylinder hydraulic flat press of Italian manufacture. Branded multi-layer press for easy wood veneering. Veneering plate dimensions: 2500 x 1300 mm Plate opening: 400 mm Pressure over full surface: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic cylinders: 4 MYLAR Teflon foil on the plates Prepared for water heating of the plates Option to install a hot water boiler Price: EUR 7,200 ex VAT Hjdpfx Ahsyi U Rnevsni The overhaul status and readiness of the machine for collection must be checked in advance! In stock in Telnice near Brno, Czech Republic Testing, machine demonstration, and operator training are included as standard.

Condition: used, Year of construction: 1978, pressure 100 t Hnsdpevzxp Uefx Ahvoi stroke 150 mm throat 345 mm dayligth 400 mm table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: like new (used), shelf length 3000 mm; shelf width 1300 mm; water heating; 6 hydraulic cylinders; piston diameter 70 mm; new Teflon films on the shelves Hjdpfx Asx Hwnfshvoni

Condition: used, Technical specifications: Number of pistons: 2 Piston diameter: 80 mm Connection to central heating system Shelf dimensions: 1000x2500 mm Clearance: 440 mm Hydraulic pressure: ~2kg/cm2 Emergency stop switch Motor power: 2 kW Power supply: 380 V Hnjdpfjymyc Dox Ahvoi Overall dimensions: Length: 3400 mm Width: 1400 mm Height: 1850 mm

Condition: used, Shelf Press Tiger TM/6 Shelf length: 300 cm Width: 130 cm Clearance between shelves: 650 mm Nice, straight aluminium shelves Water heating system; the machine has its own heaters and circulation Option to connect to external central heating Piston diameter: 85 mm, 6 pistons Emergency stop switch (pull cord) Pressure: 5 kg/cm2 Hnsdpfx Ahox S Nbbovei Weight: approx. 6.5 t