Drilling and milling machine

Optimum MB 4 PV

Year of construction: 2019, condition: new, Booth KPZ-4P • Booth Type Closed drive-thru • Worksize dimensions 3500 width x 1800 height x 1000 depth • Overall dimensions 3300width x 2300 height x 1800 depth • Power supply Electric • Nominal power 0,69kW x4 • Voltage 380V • Frequency 50-60Hz • Filters 100% Polyester • Filters count 4 • Filters hang type Bagnet type, easy on/off • Filter area 30m2 • Filter cleaning system Pneumatic - Jet Venturi Dedpjbxmfnofx Afnjkg • Ventilator type Aluminium ray rotor . • Air consumption 20,400m3/h • Loudness 74dBa • Doors Double, both side • Inside drive diameter 800mm

Year of construction: 2024, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis Dkodpfx Aeqfcvisfnsg - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm Dkedpfek Egrpjx Afneg - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank Dksdpfx Afoiqkc Ionjg

Condition: as good as new (ex-display), Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed 100 - 1.800 rpm. equipped as standard with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever Dedpfxeiypz Ej Afnekg - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Clockwise and counterclockwise rotation via contactor control - spindle protection - Operating instructions other important technical data: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - automatic spindle stop - technology calculator in display - workpiece counter

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min Dkodpfx Aewwl Izefnjg

Condition: new, Year of construction: 2024, functionality: fully functional, 1290 is a professional laser cutter for serious manufacturing. It has two laser heads, which transform this CNC laser machine into a super-efficient monster that works 24/7. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. Two laser heads function simultaneously at a minimum distance of 130 mm apart. And this model’s table has a lowering depth of 160 mm. You can give our managers a call for additional details! Wattsan 1290 Duos LT characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1920 x 1630 x 820 mm Weight: 393 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Dedpjrvimxsfx Afnokg YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Dodpegbfaxjfx Afnjkg Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: used, length:1800 mm width:1200 mm weight of the machine ca.:1,6 t Dkjdpfx Aocxxu Defnog dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: new, Year of construction: 2025, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm MAXIMUM FACE MILLING 28 mm MAXIMUM THREADING Dsdjud H Huepfx Afnjkg 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE 260 mm WORKING TABLE DIMENSIONS 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish