Tool cutter

Macmon M 100

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 Nsdeycuh Tepfx Ad Nscl dimensions: 1.100 x 1.100 x 1.660 mm

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: Njdjvambcspfx Ad Njcl >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Nodpfx Aoycuhajd Nocl Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: good (used), Year of construction: 1998, functionality: fully functional, Universal tool milling machine Product: MACMON Type: M 100 ADR Technical Data: - Heidenhain TNC124 control - Machine number: 7989 - Year of manufacture: 1998 - Travel: X 310 mm Y 170 mm Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) - Feed rate: 10-800 mm/min (infinitely variable) Nsdpfxorwml Ae Ad Njcl - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (incl. lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Space requirement: 1000x1160x1400 Incl. complete documentation The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Year of construction: 1971, condition: ready for operation (used), machine/vehicle number: 713406, -KOM 105- Offered here is a grinding machine from the company Kehren & Co with a filter system from the company FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine has 2 grinding tables/magnetic plates for pendulum machining. Technical data: Grinding machine: Manufacturer: Kehren & Co Type: D7B Year of manufacture: 1971 Make No: 713406 2 grinding tables/ magnetic plates with 700mm diameter. Ncedpfx Adog Nt A Es Nol Grinding method: segment grinding Control: Marposs weight: 6.600kg Filter system: Manufacturer: Faudi - Filtersystems Type: AFB 1,3 / 1001 Year of manufacture: 1992

Condition: excellent (used), Milling Machine Macmon M100 (comparable to Deckel FP1) Speeds: 40-2000 rpm Travel X-axis: 310 mm Travel Y-axis: 170 mm Travel Z-axis: 340 mm Tool holder: SK 40 Drawbar thread: S20x2 Table clamping surface: 600 x 215 mm T-slot size: 12 mm Weight approx. 1120 kg Dimensions: 1066 x 1048 x 1330 mm Accessories/Equipment: - Machine lamp - 3-axis digital readout - Coolant system - Operating manual - Machine levelling feet Njdpfx Aewu Egxod Nscl The machine has been technically inspected and is in good condition. Backlash X-axis: 0.1 mm Backlash Y-axis: 0.1 mm Backlash Z-axis: 0.2 mm Net price, ex stock, loaded.

Condition: new, Year of construction: 2025, feed length X-axis: 300 mm, feed length Y-axis: 165 mm, feed length Z-axis: 280 mm, travel distance X-axis: 310 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 330 mm, quill stroke: 70 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 40 rpm, overall weight: 730 kg, Dear Sir or Madam, We are pleased to offer you the Macmon M100 NC. This is a true all-rounder for training workshops and small batch production. The Macmon provides a conventional base in combination with a Heidenhain TNC128 CNC path control system, making this model an absolute must-have in certain work environments. And the best part: With a footprint of just one square meter, this machine fits into any workshop! Technical Standard Specifications: • Heidenhain TNC 128 control (integrated into the control panel) • Ribbed cast-iron construction with hardened and ground guideways on the column and slide • 360º swivel vertical head • Extendable quill, stroke 70 mm • Removable vertical head for switching between vertical and horizontal milling operations • Dovetail guides on all axes • Precision ground leadscrews on all axes Ncsdjx H Nw Sspfx Ad Nel • Mechanical tool clamping for both vertical and horizontal spindles • Tool holder ISO 40 for tools according to DIN 2080 AT 3 with draw thread S 20 x 2 or M 16 • Fixed angle table 215 x 600 mm, T-slots 4 x 12 H7 (spacing 45 mm) • Vertical mounting surface 195 x 640 mm, T-slots 2 x 12 H7 (spacing 90 mm) • HEIDENHAIN linear measuring systems, direct, resolution 0.001 mm • Positioning accuracy 0.02 mm, repeatability 0.005 mm • Horizontal milling device, console and end bracket • Chip tray, blue RAL 5019 • Paintwork: blue RAL 5019, grey RAL 7035 • 1 operating manual • 1 CD with TNC 128 programming instructions • 1 inspection log and basic circuit diagram • 1 hand-operated oil pump • With counter bearing, plain bearing bush ø 16 mm (sliding bearing) for milling arbor length 230 mm • Machine lamp • Chip guard system (required safety device according to EN 13128 for EU countries)

Condition: excellent (used), functionality: fully functional, overall weight: 1,830 kg, Year of construction: 2011, Air compressor Brand Atlas Copco Model GA75VSD FF Year of manufacture: 2011 Maximum working pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotation speed: 2975 rpm Weight 1830 kg Dimensions 2300x1100x2000 mm Air dryer Atlas Copco Type: ID 245 Year of manufacture: 2011 Nodpfx Asv Nw A Ajd Njcl Voltage: 380/400 V, 50 Hz Power 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Maximum refrigerant pressure: 42 bar Refrigerant temperature range: 1°C to 61°C Minimum refrigerant pressure: 1.2 bar

Condition: good (used), TOOL MILLING MACHINE - Macmon M 100 -Digital readout Ncsdpfxjx H Iz Ae Ad Njl -Travels X/Y/Z 310x340x170 mm -Spindle speed range 40–2500 rpm -Automatic feeds -Feed range in steps 9–450 mm/min -Tool holder ISO 40 -Swiveling vertical head -Quill / vertical head 70 mm -Horizontal–vertical milling setup -Rigid angle table 600x225 mm -Cooling unit -Drive power 2.5 kW -Chip tray -Work light -Machine feet -Documentation Dimensions (LxWxH): 1.5 x 0.8 x 1.7 meters / Weight: 950 kg Errors and omissions excepted

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Ncodpfx Adex Ada Ro Nel Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric Ncodpfjr En Dyex Ad Nsl - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Year of construction: 1997, condition: good (used), Macmon M 100 RE tool milling machine with 3-axis Heidenhain digital display from training department , rigid table , SK 40 spindle mounting. Accessories : Electric spindle guard , div. collets and cutter arbors. Good working condition , can be demonstrated under power by arrangement. Ncedpfjhgmmzjx Ad Njl

Year of construction: 1978, condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display from training department , rigid table , SK 40 spindle mounting. Accessories : div. collets and cutter arbors. Very good working condition , can be demonstrated under power by arrangement. Ncsdpehtfubjfx Ad Njl

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. Ncsdpfx Adot Hwzij Nsl • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: good (used), Year of construction: 2005, Internal article no.: 24012 Universal milling machine Macmon M100 NC Njdpfx Ajrywa Rjd Njcl YEAR OF MANUFACTURE: 2005 Control: Heidenhain TNC124 + coolant pump + machine vice Travel: X 310 / Y 170 / Z 330mm Speed: 40-2000 rpm Mounting: SK40 LxWxH: 1200 x 1600 x 1850mm Weight: approx. 1000Kg