Jig

OPS Ingersoll Gantry Eagle 500

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Bsdpfx Ajyiz T Nsa Eeld Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, Table dimensions 405 x 815 mm Magnetic table 400 x 800 mm Table travel length/cross 830 / 450 mm Distance between spindle center and table surface 580 mm Grinding wheel dimensions 350 x 40 x 127 mm Motor power 4.0 kW Blodpfsxlcmnsx Aa Eed Weight 3400 kgs Equipment, Accessories - Siemens PLC controller with touch screen - 2-axis digital readout system - Hardened and ground bed guides - Automatic infeed - Hydraulic oil tank cooler - Electric magnetic table with demagnetization - Flange-mounted grinding wheel - Built-in diamond dressing unit - Grinding wheel balancing stand - Balancing mandrel - Coolant system - Halogen lamp - Machine feet - Magnetic chip separator - Machine manuals The machine is in original condition and barely used (approx. 100-200 hours). No defects. It is being sold due to company closing.

Condition: excellent (used), Year of construction: 1983, Force: 45 tons Daylight: 205/305mm Table: 700x450mm Blsdpfx Aajgfvnno Esd Ram: 700x360mm Ram adjustment: 50mm Stroke: 10 - 50mm Strokes per minute: 80-400 Requested power: 11 kW Weight: 7.200 kos. Height: 3.100mm

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Blsdevvlmcopfx Aa Eod Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller Bljdpfx Ajfn Aqmoa Ejd straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

Condition: new, Fastech horizontal bandsaw semi-automatic BMSY 360 DGH ECO Round cutting range mm: 360 Flat cutting range mm: 510 x 360 Bjdpfx Aog Ekttoa Esld Square Cutting range mm: 360 +30 ° Round cutting range mm: 360 +30 ° Flat Cutting range mm: 440 x 360 +30 ° Square Cutting range mm: 360 +45 ° Round Cutting range mm: 360 +45 ° Flat cutting range mm: 390 x 360 +45 ° Square cutting area mm: 360 +60 ° Round cutting range mm: 200 +60 ° Flat cutting range mm: 200 x 360 +60 ° Square cutting range mm: 200 -30 ° Round cutting range mm: 360 -30 ° Flat cutting range mm: 440 x 360 -30 ° Square cutting range mm: 360 -45 ° Round cutting range mm: 360 -45 ° Flat cutting range mm: 390 x 360 -45 ° Square cutting area mm: 360 -60 ° Round cutting range mm: 260 -60 ° Flat cutting range mm: 260 x 360 -60 ° Square cutting range mm: 260 Engine power main drive kW 3 Hydraulic pump power kW 0,37 Engine power coolant pump kW 0,12 Band speed, infinitely variable: m/min.20 - 100 Saw band dimensions mm: 4800x34x1,1 Working surface height mm: 860 weight kg: 1450 length / depth / height mm: 2650 / 1210 / 1870 Double mitre saw Infinitely variable belt speed hydraulic vice High performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for mitre angle

Condition: used, Year of construction: 2009, pressure 40 t stroke 4 - 100 mm no. of strokes 130 /min throat 230 mm Bjdpsvzxpnsfx Aa Ejld dayligth 475 mm table surface area 650 x 460 mm hole in the table 205 x 165 mm table height over floor 710 - 950 mm table adjustable 240 mm ram surface 435 x 240 mm ram adjustment 85 mm power requirement 5,0 kW Weight 2,6 t dimensions of the machine ca. 1,2 x 1,7 x 2,3 m x m x m permitted for manual loading according to the CE-norm with motor, pneumatic hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, motoric centralized lubrication, adjustable table, two-hand and foot operation

Condition: excellent (used), Year of construction: 2011, Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 - max. belt dimensions 3500 x 30 mm Bsdjg Saqvjpfx Aa Esld - max. contact pulley diameter 200 mm - motor power 4 kW 2 x polishing stations, - polishing wheel diameter 350 - 600 mm - power 5.5 kW Gripper change cabinet Belt conveyorInteroll Automation GmbH - Total length approx. 2000 mm - Belt width approx. 440 mm The price includes a complete concept as you can see on the video We have 4 such cells. It is possible to make every detail as you can see in the video

Condition: excellent (used), For sale is a system with 2 OPS Ingersoll Gentry Eagle 500 machines and an Erowa automation for tool and workpiece change. The system is in very good condition and fully functional. Both machines are loaded via the Erowa automation, one machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Blodpfxoq Su Hns Aa Eed Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2009, condition: used, material width 320 mm material thickness 8 mm no. of straightening rolls 9 material cross-cut 2000 mm² Bodpop U Uwiofx Aa Esld weight of the machine ca. 4,2 t dimensions of the machine ca. 2000x2000x2400 mm