FLAT GRINDING MACHINE

ELB-Schliff Perfekt 6

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Bjdpjx U U Ekofx Ag Tsdi Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: used, Year of construction: 2019, x-travel 762 mm y-travel 508 mm z-travel 610 mm control MAX5 Hurco distance spindle nose and table 152 - 762 mm speed mainspindle max. 12.000 U/min power capacity - main spindel 13,4 kW max. Torque 214 Nm tool taper SK 40 DIN 69871 A table surface area 1.020 x 510 mm max. table load 1.500 kg T-slots 5 x 18 x 100 mm number of toolpositions 30 pos. tool taper SK 40 tool diameter max. 80 / 76 mm tool length - max. 300 mm weight of tools max. 7 kg rapid traverse X-axis 38 m/min rapid traverse Y-axis 38 m/min rapid traverse Z-axis 32 m/min total power requirement 24 kVA weight of the machine ca. 5,1 t dimensions of the machine ca. 4,0 x 4,1 x 2,8 m CNC-Machining Center Vertical HURCO - VMX 30i - Year 2019 / Commissioning May 2020 Bdodsz I T Rtspfx Ag Tsi - only approx. 500 operating hours - Adaptipath Trochoidal milling for higher metal removal rates, controlled step-over, and residual material detection - Simulation graphics - Tool and material library - Pocket milling with islands - Synchronous tapping (Tapping without a compensating holder) - incl. 15x high-clamping force chucks BDV40-HMC20S-85 - incl. 3x tapping chucks BDV40-MGT6-80 - incl. mechanical centering vise BSM 250 - incl. 1x set of quick-change hardened grip jaws with grip strip - incl. various tap holders - incl. various drill bits and reducing sleeves

Year of construction: 2017, condition: excellent (used), Alicona InfiniteFocusXL200 G5 Measuring System Positioning Volume: 200 mm × 200 mm × 200 mm Bodpfxsx Dxw Ts Ag Tedi Maximum Workpiece Weight: 30 kg Objective Magnifications: 2.5x, 5x, 10xHX, 10x, 20xHX, 20x, 50x, 100x Numerical Aperture: 0.075–0.8 Working Distance: 4.5–37 mm Lateral Measuring Range: 5.63 mm to 0.16 mm Vertical Resolution: 2300 nm to 10 nm Measurement Noise: 800 nm to 1 nm Vertical Measuring Range: 8–36 mm Measuring Speed: up to 1.7 million measurement points/s Minimum Measurable Roughness Ra: 7 µm to 0.03 µm Minimum Measurable Roughness Sa: 3.5 µm to 0.015 µm Minimum Measurable Height: 2.3 µm to 0.01 µm Maximum Measurable Area: up to 40,000 mm² Flatness Accuracy: 0.1 µm (10x objective) No guarantee is given for the correctness, completeness, or up-to-dateness of the information.

Condition: reconditioned (used), functionality: fully functional, center height: 160 mm, center width: 650 mm, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a Weiler Primus VC / Praktikant VC lathe. This model series is particularly distinguished by its Siemens control panel and completely stepless speed control. As the name suggests, the VC can operate at a constant cutting speed. The machine has undergone a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper mount: MT3 Quill stroke: 85 mm Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg Other equipment and accessories: Siemens control panel, coolant system, chuck guard, lead screw and feed screw covers, 2 emergency stops, operating instructions, CE declaration of conformity, and much more upon request... Our service promise to you: - We are a certified master craftsman in the field of mechanical engineering - All machines undergo at least a workshop inspection - All lubricants and any worn parts will be replaced in advance. Bodpfowhx I Nsx Ag Tjdi - Upon request, we can fully or partially overhaul the selected machine. - Upon request, we can repaint the selected machine in your desired color. - Upon request, you can order additional accessories such as tools, etc. directly. - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery.

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Bsdpfju Ng Ncox Ag Todi Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, Bsdpfjzg Efijx Ag Tjdi 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min - Infinitely adjustable cutting pressure: 10 – 15 bar - Feed rate: 0 – 300 mm/min - Cutting range at 90° – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg Bsdpjw I Scfsfx Ag Tedi

Condition: like new (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, turning length: 1,070 mm, turning diameter: 460 mm, spindle motor power: 22 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, ONLY 10 HOURS !!!!! There are 8 Doosan CNC Turning center Like this in our warehouse Bedjzk I Rvjpfx Ag Tedi 1 Set DOOSAN GT2600 LM CNC Turning center With C Axis - 12 inç - 10 Hours 2 Set DOOSAN GT 2600 CNC Lathe 12 inç 10 hours 2 Set DOOSAN GT2100 CNC Lathe 10 inç 10 hours 3 Set DOOSAN Lynx 2100 CNC Lathe 8 inçh 10 Hours you can visit and check all machine

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Bdodpfxszkbr Tj Ag Tei Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Bsdpfjy R Dtcex Ag Todi