Surface grinders Okamoto ACC 63DX

Okamoto

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Ncjdpfxey E I Iys Afasr Type PSG 63 – UAN Year of manufacture: 1988 Grinding length: 600 mm Grinding width: 320 mm Max. workpiece height: 500 mm Table travel (longitudinal): 750 mm Table travel (cross): 340 mm Grinding wheel diameter: 350 mm Grinding wheel width: 40 mm Spindle speed: 1500 rpm Rapid vertical feed: 400 mm/min Power: 3.7 kW Automatic feed Magnetic chuck Coolant system Weight: 2500 kg Price: EUR 2,000—plus VAT, ex location

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° Ncedpfjxap Eaex Afajr b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: good (used), internal diameter 200 mm grinding depth 80 mm stroke of the table X= 300 mm stroke of the table Y= 500 mm control FANUC 18i-TA total power requirement 7 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,950x2,330x1,640 m O K A M O T O High-Precision Internal Cylindrical Grinding Machine with FANUC CNC Control, System 21 i – TA, 2-Axis Simultaneous Machining For machining bores, end faces, and outer diameters in a single setup TECHNICAL DATA Internal grinding diameter: (6) - 100 mm Grinding depth approx.: 80 mm Max. table stroke: X-axis 300 mm Z-axis 500 mm Swing diameter over table: 600 mm Swing diameter in chuck cover: 260 mm Table speed: (X/Z-axis) 0.1 - 10,000 mm/min Swivel angle of workpiece spindle: -5 to +15 degrees Smallest input increment: Ncedpfx Aey Dvnrofaor X-axis 0.0001 mm Z-axis 0.0001 mm Workpiece spindle speed: 100 - 850 rpm Grinding spindle speeds: Standard (infinitely variable) up to 10,000 rpm and 20,000 rpm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 400 mm Nsdpfx Ajy Avbijfaocr weight of the machine ca. 4,5 t dimensions of the machine ca. 3592 x 3519 x 2203 mm Additional information Horizontal surface grinder in almost new condition Operating hours: CNC on: 1198 hours Machine on: 1117 hours Automatic operation: 509 hours Grinding operation: 228 hours Okamoto Touch Screen Control Travel X-axis: 600 mm Travel Y-axis: 22.5 – 497 mm Travel Z-axis: 400 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Accessories: - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter system

Condition: used, table surface area 170 x 170 mm base plate surface area 170 x 170 mm Ncedpfx Aevh Nbbofasr throat 185 mm quill stroke 65 mm spindle turning speed range 500 / 896 / 1473 / 2428 U/min column diameter 65 mm total power requirement 0,37 kW

Condition: used, Year of construction: 2000, functionality: fully functional, OKAMOTO ACC 95DX Precision Surface Grinder – 400V For sale is an OKAMOTO ACC 95DX surface grinder. This is a robust industrial machine designed for precision surface grinding, making it ideal for toolmaking and manufacturing applications. The machine comes with a separate control console. Inspection and test run available by appointment. Machine Data: • Manufacturer: OKAMOTO Machine Tool Works, Ltd. • Model: ACC 95DX (Nameplate: ACC95DXM) Nedpfx Afowtm Dijaocr • Serial number: 690277 • Voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Total connected load: 8.6 kVA • Control/Auxiliary voltage: AC 100 V, DC 22/24 V (as per nameplate) Equipment / Notes: • Side-mounted control console (see photo) • Grinding head/safety enclosures included • Availability: immediate / by arrangement • Sale ex stock, subject to prior sale

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm Ncsdpew Dvkasfx Afasr --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: new, Center length ----- 1500 mm Center height ----- 230 mm Spindle diameter ----- 460 mm Main spindle passage ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY DUTY VERSION - WEIGHT 2650 KG INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 rungs * 3 Chuck 250 mm * 4 Chuck 320 mm * 350 mm clamping plate Ncsdeh U Nztjpfx Afaer * Fixed and moving glasses * LED working light and cooling system * Electric brake CE * Box with various tools

Year of construction: 2018, condition: ready for operation (used), - USED - SURFACE GRINDING MACHINE MAX GRINDING LENGTH: 600 mm MAX GRINDING WIDTH: 400 mm LONGITUDINAL TRAVEL: 750 mm TRANSVERSAL TRAVEL: 340 mm 340 mm TABLE SIZE: 650 x 400 mm MAX ADMITTED LOAD: 420 Kg MAGNETIC CHUCK: 600 x 400 mm GRINDING WHEEL SIZE: 355 x 38 x 127 mm GRINDING WHEEL SPEED: 1500 rpm Ncjdpfxjyry R Ss Afaor MOTOR POWER: 3,7 kW WEIGHT: 2900 Kg OVERALL DIMENSIONS: 2725 x 2205 x 1761 mm ACCESSORIES: PAPER FILTER

Year of construction: 2001, condition: ready for operation (used), travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, overall weight: 1,250 kg, total height: 2,129 mm, spindle motor power: 1,500 W, product length (max.): 1,940 mm, table load: 120 kg, table width: 1,317 mm, number of axes: 3, This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details. • Grinding table • Grindable surface: 450 × 150 mm • Distance spindle–table: 60–510 mm • Max load on table: 120 kg • Wheel and spindle • Wheel diameter: 205 mm • Wheel peripheral speed: 2,400 m/min • Spindle motor power: 1.5 kW / 2P • Motors • Hydraulic pump motor: 0.75 kW / 4P • Cross feed motor: 0.75 kW / 3P Nedoyiffgjpfx Afaocr • Headstock up/down motor: 0.4 kW

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Ncjdpfowbuyzsx Afaor

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 92060, grinding length: 650 mm, grinding width: 230 mm, total height: 2,276 mm, total length: 3,030 mm, total width: 1,784 mm, workpiece weight (max.): 200 kg, grinding height: 397 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, grinding wheel diameter: 205 mm, table speed: 25,000 mm/min, table length: 2,000 mm, table load: 20,000 kg, type of input current: AC, table width: 2,000 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,100 kg, table height: 250 mm, grinding spindle motor power: 1,500 W, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 5 rpm, grinding spindle speed: 3,000 rpm, input voltage: 380 V, disc diameter: 205 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Okamoto ACC52SA is a precision surface grinding machine featuring a horizontal grinding spindle and hydraulic longitudinal feed, primarily used in toolmaking, jig and fixture manufacturing, and small batch production. The machine is distinguished by its robust cast construction, precise guideways, and user-friendly operation. It is especially suitable for high-precision grinding of flat surfaces and for machining hardened workpieces. Typical for the ACC series are sturdy double-V guideways and automatic feed systems, ensuring uniform surface quality and high repeat accuracy. Nsdpfeyt Dm Hsx Afascr Okamoto SA Control (MDI control) Cycle control and manual operation The quoted price is exclusive of dismantling, packaging, and shipping. Sale from site, subject to prior sale. The machines are sold in used condition; any warranty or guarantee is excluded.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 500 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 500 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 4,600 kg, warranty duration: 12 months, year of last overhaul: 2026, Demonstration CNC cylindrical grinding machine prepared for automation Manufacturer: OKAMOTO Model: OGM-350 P NCIII Year of manufacture: 2023 Control system: Fanuc Oi Model D Operating hours: approx. 200 h Technical Specifications Max. swing diameter: 320 mm Max. distance between centers: 500 mm Max. workpiece diameter to be ground: 300 mm Max. workpiece weight between centers: 150 kg Max. workpiece weight (flange + chuck + workpiece): 40 kg Grinding Wheel Dimension (Diameter x Width x Bore): 455 x 75 x 127 mm Wheel speed: stepless Peripheral speed: 45 m/sec Grinding spindle head (X-axis) Travel, max.: 300 mm Swivel angle: not swiveling Workpiece table (Z-axis) Travel: 870 mm Swivel angle: 0 – 10° Workpiece spindle head Type: fixed/pivoting Spindle taper: MT 4 Spindle bore diameter: 20 mm Spindle speed: 10 – 500 rpm Swivel angle: not swiveling Tailstock Type: manual fine adjustment Quill travel: 30 mm Taper: MT 4 Drive Power Grinding wheel drive: 5.5 kW Total connected load: 20 kVA Dimensions / Weight L x W x H approx.: 3400 x 2330 x 1950 mm Machine Weight approx.: 4,600 kg Standard Equipment Carbide center points: 2 pcs Complete FANUC keyboard with radius compensation for generating ISO programs Workshop programming graphical software for grinding and dressing cycles with teach function GAP eliminator Shoulder positioning Constant coolant flushing of the table LED lamp Documentation Leveling bolts and base plates Operator tool set Accessories Robot interface automatic machine shutdown 3-color signal lamp Precise positioning of the work spindle for workpiece loading dial gauge for table swivel angle balancing arbor automatic door complete grinding wheel guard when the door is open tailstock with electric quill retraction Ncedpfsytqagjx Afasr flange: 1 pc belt filter system Commissioning and training upon request. (Commissioning by Okamoto is required for warranty) Transport on request

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Ncedeu Rqynopfx Afasr Coolant system with universal paper belt filter Complete documentation

Condition: good (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 230 mm, spindle speed (max.): 3,000 rpm, For sale is a surface grinding machine of the brand Okamoto, type PSG 52 UDX The machine is well-maintained and ready for immediate use Technical data: Year of manufacture: 1989 Grinding area: X-axis: 650 mm (manual) Z-axis: 230 mm Y-axis: 47 mm – 400 mm Max. height movement lower edge of new wheel (with ¯ 205 mm) min./max. - table) Grinding wheel ¯: Maximum ¯ 225 mm. Speed range: 3000 rpm (stepless speed control) Table feed: 0.3 – 25 m/min (hydraulic in X-axis) Table area ground: 550 x 200 mm Magnetic chuck: 500 x 200 mm (standard size) (Load incl. magnet max. 200 kg) Transport and loading can be arranged on request, for an additional charge, Europe-wide. Prices plus VAT Viewing possible by appointment. Contact us, our team looks forward to assisting you. Ncedpfxewnnbrj Afasr Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, visit our website