Used Liebherr L 522 for sale (240)

Condition: good (used), Year of construction: 1957, functionality: fully functional, total length: 3,000 mm, total height: 2,600 mm, total width: 2,500 mm, overall weight: 6,000 kg, cutting height (max.): 400 mm,

Condition: used, mileage: 1,001 km, gearing type: other, color: white, first registration: 01/2009, Year of construction: 2009, loading space volume: 7 m³, driver cabin: other, Vehicle location: Bovenden, steel body Body: Liebherr HTM 704 F concrete mixer body, 7m³ on a Notter (CH) swap body system, in mint condition. Also available with a matching MAN 26.480 BL-6x4 H-4 (Hydro) vehicle for an additional charge. ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! Iiedpfx Ahjwkvpvsyjh - .

Condition: used, Year of construction: 2013, operating hours: 9,710 h, One of the last models without a particulate filter: Liebherr L 542 Z 2plus1 Only used for light work on paved surfaces? No construction site! Iodpfx Aez Rh Rhshyeih German machine! Machine delivered on January 15, 2013 – produced in 2012 – therefore still without a particulate filter! Excellent machine – technically and visually well-maintained – All services performed at Liebherr – last recorded on October 8, 2020 at 8678 hours Chassis No. VATZ0435TZB032052 Year of manufacture 2013 Operating hours approx. 9710 Liebherr 4-cylinder inline engine, water-cooled with turbocharger Emission level III, 142 hp with 6.9 liters displacement (Liebherr engine type 934) * BSS hub damper, driving vibration damper – vibration damping * 3rd hydraulic control circuit for tipping bucket, sweeper, grab bucket, etc. * Air conditioning * Central lubrication system – factory installed by Liebherr * Reversing warning device, audible (beeper) * Engine air intake via pre-filter TOP-AIR * Comfort driver's seat with pneumatic suspension * Steering wheel adjustable in inclination * 4 work lights on the front of the cab roof * 4 additional lights on the rear of the cab roof * 2 additional lights on the side of the cab roof * Protective grille for headlights at the front * Radiator with coarse mesh for easier cleaning * Fluff filter in front of the radiator * Reversing fan to blow out the radiator (fan is reversible) * Pre-installation for rotating beacon, yellow light, on the top center of the cab * Battery disconnect switch * Radio pre-installation * Road approval Permissible total weight approx. 17,000 kg, unladen weight approx. 15,000 kg Hydrostatic drive with 3-speed transmission Tires 20.5 x 25 L3, front, 50% remaining, Michelin Tires 20.5 x 25 L3, rear, 40% remaining, Michelin Offer with permanently mounted bucket, 2.8 cubic meters, for the price of €43,900.00 net Optional equipment available at an additional cost: * Hydraulic quick coupler €3,550.00 including replacement of the permanently mounted bucket with a quick-coupler bucket * Tipping bucket from 3.0 cbm to 5.5 cbm from €4,950.00 * Bucket with undercarriage for quick coupler, 3.0 cubic meters from €3,660.00 * Volume bucket, 4 cubic meters, €4,500.00 * 4-in-1 bucket, 2 cubic meters, on request * Pallet forks, 5 or 8 tons, from €1,990.00 If required, also available with a used scale! Pfreundt WK 50 – €3,950.00 All prices net, export – domestic plus 19% VAT. Sale only to businesses or for export. Sale in the condition as it stands. No guarantee or warranty. The indicated mileage or operating hours are read from the mileage or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment must be checked separately if necessary. We will also gladly accept your vehicle in part exchange.

Condition: used, Year of construction: 2009, Liebherr Crane 160 HC-L 8/16 incl. remote control: 160 HC-L 8/16, height: 37.5 m, jib length 55 m, works number 30349039, year of manufacture: 2009 incl. the following crane parts: 1 cross-shaped undercarriage 2 base ballast A 7.5 t 12 base ballast B 4.8 t 1 jib 611, 10.7 m 1 jib 621, 8 m 2 jibs 622, 10.35 m 1 jib 631, 5.18 m 1 jib 641, tip 1 base tower, 12.42 m 5 tower sections, 4.14 m "Completely refurbished, sandblasted and newly painted! This crane has been completely overhauled and is in excellent condition. Old layers of paint and rust were thoroughly removed by sandblasting before a high-quality new paint coating was applied. Subject to changes, errors and prior sale! You can find more vehicles on our website. Sales are exclusively subject to our general terms and conditions – see our homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Iisdpfoz Edttjx Ahyjh Legal note: This sales advertisement does not constitute an offer in the sense of § 145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, Year of construction: 2005, operating hours: 6,784 h, LIEBHERR L 506 Wheel Loader Iedpfx Ajz El Dmshyjih Year of manufacture: 2005 * Quick coupler * 42 kW * Max. speed: 20 km/h * Total weight: 6,300 kg * German machine

Condition: used, mileage: 1,100 km, gearing type: other, color: green, overall weight: 35,000 kg, tire size: 425/65R22,5, first registration: 02/2009, suspension: air, driver cabin: other, wheelbase: 1,300 mm, Equipment: ABS, Vehicle location: Bovenden, 2 axles, MB axles (disc brakes), air suspension, ABS (anti-lock braking system), U-protection, side aluminum undercarriage protection Wheelbase: 1300 mm Structure: LIEBHERR concrete mixer approx. 10m³/ARCHIVE IMAGES! Can be converted with a separate engine (Deutz or other make) for an additional charge! Suitable hydraulics for engine output on the towing vehicle available for an additional charge of €3,900.00 net! Iiodpfjvy A H Uex Ahyjh 6x built in 2009 with 10m³, 2x built in 2011 with 12m³, 3x built in 2012 with 12m³! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, mileage: 1,100 km, gearing type: other, color: green, overall weight: 35,000 kg, tire size: 425/65R22,5, first registration: 05/2009, suspension: air, loading space volume: 10 m³, driver cabin: other, wheelbase: 1,300 mm, Equipment: ABS, Vehicle location: Bovenden, 2-axle, MB axles (disc brakes), air suspension, ABS (anti-lock braking system), U-protection, aluminum side guards Wheelbase: 1300 mm Body: LIEBHERR concrete mixer approx. 10m³ Can be converted with separate engine (Deutz or other make) for an extra charge! Iodpjvy A Iljfx Ahyoih Suitable hydraulics for engine power take-off on towing vehicle available at an extra charge of € 3,900.00 net! 6x built 2009 with 10m³, 2x built 2011 with 12m³, 3x built 2012 with 12m³! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,100 km, gearing type: other, color: green, overall weight: 35,000 kg, tire size: 425/65R22,5, first registration: 04/2009, suspension: air, loading space volume: 10 m³, driver cabin: other, wheelbase: 1,300 mm, Equipment: ABS, Vehicle location: Bovenden, 2 axles, MB axles (disc brakes), air suspension, ABS (anti-lock braking system), U-protection, side aluminum undercarriage protection Wheelbase: 1300 mm Structure: LIEBHERR concrete mixer approx. 10m³/ARCHIVE IMAGES! Can be converted with a separate engine (Deutz or other make) for an additional charge! Suitable hydraulics for engine output on the towing vehicle available for an additional charge of €3,900.00 net! 6x built in 2009 with 10m³, 2x built in 2011 with 12m³, 3x built in 2012 with 12m³! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Iiedpfevy A Ifsx Ahyjh

Condition: used, mileage: 1,100 km, gearing type: other, color: green, overall weight: 35,000 kg, tire size: 425/65R22,5, first registration: 01/2011, suspension: air, driver cabin: other, wheelbase: 1,300 mm, Equipment: ABS, Vehicle location: Bovenden, 2 axles, MB axles (disc brakes), air suspension, ABS (anti-lock braking system), underbody protection, side aluminum fender guards. Wheelbase: 1300 mm, Body: LIEBHERR concrete mixer, approx. 10 m³. Can be upgraded with a separate engine (Deutz or another manufacturer) for an additional charge! Iiodsi Rlagepfx Ahyoh Suitable hydraulics for engine drive on the towing vehicle available for an additional 3,900.00 EUR (net)! 6 units manufactured in 2009 with 10 m³, 2 units manufactured in 2011 with 12 m³, 3 units manufactured in 2012 with 12 m³! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: used, mileage: 1,100 km, gearing type: other, color: green, overall weight: 35,000 kg, tire size: 425/65R22,5, first registration: 03/2009, suspension: air, driver cabin: other, wheelbase: 1,300 mm, Equipment: ABS, Vehicle location: Bovenden, 2 axles, MB axles (disc brakes), air suspension, ABS (anti-lock braking system), underbody protection, side aluminum protective panels. Wheelbase: 1300 mm. Body: LIEBHERR concrete mixer, approx. 10 m³. Can be retrofitted with a separate motor (Deutz or another manufacturer) for an additional charge! Iiedpei Rq Avjfx Ahyoh Suitable hydraulics for motor drive on the towing vehicle are available for an additional cost of €3,900.00 (net). 6 units from 2009 with 10 m³, 2 units from 2011 with 12 m³, 3 units from 2012 with 12 m³! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, first registration: 07/2017, Year of construction: 2017, operating hours: 18,886 h, Model year: 2017 Number of cylinders: 4 Engine displacement: 6,930 cc Unladen weight: 13,500 kg Payload: 3,500 kg GVWR: 17,000 kg Dimensions (L x W x H): 753 x 250 x 325 cm CE marking: yes # OFFER ## Liebherr L 538 wheel loader with high-dump bucket Manufacturer: Liebherr Type: L 538 Year of manufacture: 2017 Operating hours: 18,886 original hours Iisdpjzk Eldjfx Ahyeh Color: Original Liebherr factory paint Condition: Normal, well-maintained used condition ### General description We offer you this Liebherr L 538 wheel loader from the year 2017. The machine has 18,886 original operating hours and is in a normal, well-maintained used condition. Thanks to the proven Liebherr quality, this machine is ideally suited for daily professional use. The wheel loader is equipped with an original high-dump bucket and is ideal for loading walking floor trailers, containers, and high trucks. In addition, the machine has solid rubber tires, which minimizes downtime due to tire damage. This makes it particularly suitable for recycling plants, scrap yards, transshipment companies, and industrial applications. ### Engine * Manufacturer: Liebherr * Engine type: Liebherr D934 A7 * 4-cylinder turbocharged diesel engine * Displacement: approx. 5,030 cm³ * Power: 104 kW (141 hp) * Emission standard: Stage IV / Tier 4 Final * Water-cooled * Fuel-efficient * High torque at low speeds ### Drive * Liebherr hydrostatic drive * Permanent all-wheel drive * Automatic transmission * High tractive force * Precise and comfortable operation ### Equipment * Original high-dump bucket * Solid rubber tires * Comfort cab * Air conditioning * Heater * Air-suspended driver's seat * Joystick control * Work lights * Reversing alarm * CE version ### Technical data * Operating weight: approx. 13,500 kg * Engine power: 104 kW (141 hp) * Bucket capacity, high-dump bucket: approx. 3.0 m³ * Tipping load, straight: approx. 9,500 kg * Maximum speed: 40 km/h ### Transport dimensions * Overall length: approx. 7.55 m * Overall width: 2.55 m * Overall height: approx. 3.30 m * Wheelbase: 3.00 m * Transport weight: approx. 13,500 kg ### Areas of application This machine is ideally suited for: * Recycling plants * Scrap and metal recycling * Waste management * Transshipment companies * Wood industry * Biomass * Composting plants * Industrial companies * Loading of walking floor trailers and containers ### Summary * Year of manufacture 2017 * 18,886 original operating hours * Original Liebherr factory paint * High-dump bucket * Solid rubber tires * Fuel-efficient Liebherr engine * Hydrostatic drive * Well-maintained used condition * Ready for immediate use This Liebherr L 538 is a reliable and economical wheel loader solution for professional use in recycling, transshipment, and industrial operations. The combination of a high-dump bucket, solid rubber tires, and robust Liebherr technology makes this machine a...

Condition: used, Year of construction: 2010, operating hours: 7,900 h, Equipment: all wheel drive, Liebherr L 514 P (Parallel linkage) Stereo loader (articulated steering + rear axle steering - extremely maneuverable!!!) Without particulate filter and without AdBlue!!! Chassis number VATZ1115JZB 0025394 Year of manufacture 2010 Operating hours according to meter 7996 P-linkage - with parallel guidance Power 72 kW / 98 hp, total weight 10500 kg Equipment: * Hydraulic quick coupler * Automatic central lubrication system * 4 work lights at the front on the cab roof Iedpez Hhrvofx Ahyjih * Radio preparation * Engine air intake with pre-separator TOP-AIR * Rotating beacon (flashing light) at the rear of the cab - center * Rear view camera with separate monitor * Main switch for electrical system * Road approval possible!!! Hydrostatic drive with 2 speeds - 30 km/h Tires front 17.5 R 25 40% good, rear 17.5 R 25 30% good Width 2400mm Price with quick coupler and bucket 1.6 cbm - 33,900 € Various buckets for this machine in stock, available for an extra charge. Equipment available on request:* Mixing-screening bucket * Folding bucket 1.6 or 2.0 cubic meters from 3,250 € * High-dump bucket from 2.0 - 2.5 cubic meters from 3,950 € * Volume bucket 3.0 cubic meters No. 59 - 2950 € * Screening-mixing bucket - price on request * Pallet fork 5 tons from 2,190 € Other equipment on request!!! All prices are - net price ex warehouse + 19% VAT or export! We can gladly offer you the transport to your location. Sale only to businesses or for export. Sale as is, in the condition the machine is in. No guarantee or warranty. The mileage or operating hours stated are read from the mileage or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information / descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the details in the order confirmation and invoice apply. The seller assumes no liability / warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment may need to be checked separately. We will also gladly accept your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: used, Year of construction: 2019, operating hours: 7,200 h, Equipment: all wheel drive, Very nice Liebherr L 546 for sale Top condition - low operating hours: Liebherr L 546 Z 2plus1 Delivered to customer on April 26, 2019 Original paint Chassis number: VATZ1560-054320 Year of manufacture: 2019 Operating hours: approx. 7270 4-cylinder inline engine, 123 kW/167 hp, water-cooled with turbocharger, emission stage 4 Operating weight depending on equipment: approx. 15,000 kg Dimensions depending on equipment: Machine length: 7,200 mm, width 2,500 mm, height 3,300 mm, hydrostatic drive with 3-speed gearbox * Driving vibration damper BSS? Suspension system for attachments * Central lubrication system, factory installed by Liebherr * Reversing fan for cleaning the radiator package - reverse operation * Climbing aid in front of the windshield for easier cleaning of the windshield * Air filter with pre-separator "TopAir" for pre-cleaning the intake air * Premium display with touchscreen * Driver's seat "Comfort" with pneumatic suspension, seat heating, and headrest * Automatic climate control - maintains the set temperature automatically * Adjustable steering column * Armrest on the right * Opening window on the left in the driver's door * Foldable exterior mirrors * Radio with hands-free system * Cooler box in the cab * Rear view camera Iiodpfx Aozrapajhyoh * Lamp bracket made of steel instead of plastic * 4 work lights on the rear of the driver's cab roof, LED * 4 work lights on the front of the driver's cab roof, LED * Fire extinguisher on the fender * Road approval * Tires 20.5 x 25 L3, front 2 x 30% remaining * Tires 20.5 x 25 L3, rear 2 x 30% remaining * Net price with permanently mounted earth bucket, approx. 2.8 cubic meters: 73,900.00 EUR net + VAT Optional equipment available for an extra charge: * Hydraulic quick coupler 3,550.00 EUR * Pallet fork, 5 or 8 tons, from 2,190.00 EUR Used scales incl. installation * E.g. Pfreundt WK 60 S 5,900.00 EUR * Also available with printer * 3rd hydraulic circuit for attachments such as tipping bucket, grab bucket, sweeper, etc. on request * All prices net export? Domestic plus 19% VAT We can offer you the transport to your location. Sale only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment may need to be checked separately.

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 10 (18) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min Iisdpjyv Ipfjfx Ahyoh tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: used, mileage: 1,100 km, gearing type: other, color: green, overall weight: 35,000 kg, tire size: 425/65R22,5, first registration: 03/2009, suspension: air, loading space volume: 10 m³, driver cabin: other, wheelbase: 1,300 mm, Equipment: ABS, Vehicle location: Bovenden, 2 axles, MB axles (disc brakes), air suspension, ABS (anti-lock braking system), underbody protection, side aluminum protective panels. Wheelbase: 1300 mm. Body: LIEBHERR concrete mixer, approx. 10 m³. Can be retrofitted with a separate motor (Deutz or another manufacturer) for an additional charge! Isdpfei Rlc Uex Ahyjih Suitable hydraulics for motor drive on the towing vehicle are available for an additional cost of €3,900.00 (net). 6 units from 2009 with 10 m³, 2 units from 2011 with 12 m³, 3 units from 2012 with 12 m³! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, axle configuration: 2 axles, first registration: 07/2009, suspension: air, tire size: 425/65R22.5, wheelbase: 1,310 mm, Applicable material: Concrete Tyre size: 425/65R22.5 Suspension: air suspension Drive: Wheel Empty weight: 8.420 kg Carrying capacity: 27.580 kg GVW: 36.000 kg Make of bodywork: LIEBHERR Iisdjuc Enzepfx Ahysh

Condition: used, Year of construction: 2007, Equipment: all wheel drive, This machine has just arrived in our inventory: Liebherr wheel loader L 524 Z 2 plus 1 ?Very nice machine!!! Mostly original paint No particulate filter – no AdBlue Iisdpfjzxb Anox Ahyeh VIN: VATZ0659VZB019076 Z – Load sensing system Year of manufacture: 2007 Recorded operating hours: 10,123 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 118 hp, hydrostatic drive with 3 driving ranges: driving speed range 1: 0–6.0 km/h, driving speed range A1-2: 0–16.0 km/h, driving speed range A1-3: 0–34.0 (40) km/h * Ride vibration damper for the load-sensing system – load-sensing system damping * Hydraulic auxiliary control circuit for tipping bucket, grab bucket, silage block cutter, sweeping brush, etc. * Air conditioning * Comfort driver's seat with pneumatic suspension * 4 work lights on the front of the cab roof * 2 work lights at the rear * Rear window heating * Battery disconnect switch * Rotating beacon (flashing light on the rear of the cab roof) * Road approval possible Permissible total weight: 13,500 kg Machine width: 2500 mm * Tires, front axle: 17.5 x 25 L3 – 50% * Tires, rear axle: 17.5 x 25 L3 – 50% Offer with quick coupler and 2.0 cubic meter bucket for a price of €44,900.00 net + VAT, ex warehouse Gemmingen Equipment available at an extra charge: * Tipping bucket from 2.5, from €4,950.00 * Bucket with lower mounting for quick coupler, 3.0 cubic meters: €3,660.00 * 4-in-1 bucket 2 cubic meters, on request * Pallet fork 5 tons from €2,190.00 Can also be supplied with a used scale if required! Pfreudt WK 60 * Optionally with printer for the scale Sale only to commercial businesses or for export. Sold as is, in the condition the machine is in. No guarantee or warranty. The specified mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the details in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately if necessary. We will also gladly accept your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: used, first registration: 06/2007, total width: 2,550 mm, Key features Internal reference: 26055M Chassis number: 936984 Vehicle model: Concrete mixer Liebherr 12m³ / Swiss-Vehicle Vehicle make: Liebherr Product category: Concrete mixer Condition: Used Date of first registration: 06/15/2007 Weights & Dimensions Vehicle width: 2550 Iijdpfez Hp D Hsx Ahyoh Superstructure Superstructure manufacturer: Liebherr Superstructure model: Concrete mixer Superstructure internal dimensions l x w x h: 12m³ Superstructure year of manufacture: 2007

Condition: used, Year of construction: 2016, Equipment: all wheel drive, This machine has just arrived at our facility: Liebherr wheel loader L 526 Z 2 plus 1? In good condition? Excellent features? Looks like new!! Liebherr service maintained? Service history stored on the Liebherr central computer! All major services performed by Liebherr. VIN: VATZ1558PZB0444200 Year of manufacture: 2016 First put into service: 2017 Operating hours: Original 10,566 hours, verifiable! Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 136 hp, emission stage TIR IV (Note: Brochure = TIR V!!!) Hydrostatic drive with 3 driving ranges, driving speeds: Range 1: 0 - 6.0 km/h, Range A1-2: 0 - 16.0 km/h, Range A1-3: 0 - 20.0 (40) km/h (currently limited to 20 km/h!) * Standard Z-linkage * Quick coupler with hydraulic attachment kit, 3rd hydraulic circuit for tipping/grabbing/or 4/1 bucket with multi-quick coupler, towing hitch at the rear, ride vibration damper, linkage vibration damper, automatic central lubrication system - factory installed by Liebherr, air conditioning, automatic climate control - automatically maintains temperature, step for easier cleaning of the windshield, steel lamp mounts instead of plastic, folding and heated exterior mirrors, tilting window on the left/driver's door, premium display with touchscreen, driver's seat "Comfort" with pneumatic suspension, seat heating and headrest, Comfort radio with hands-free system, 2 work spotlights on the cab roof at the rear (LED), 2 work spotlights on the cab roof at the front (LED), fuel filter with pre-filter, air intake with pre-separator - TopAir, reversing fan for blowing out the radiator, interior mirror, adjustable steering column, pre-installation for rotating beacon - flashing light, folding upper section of the cab in the center, rear view monitoring with camera - monitor in the display, crane/tie-down eyes at the rear and front, protective ventilation system. Tires 17.5 x 25 L3, front: 2 x 60% Tires 17.5 x 25 L3, rear: 2 x 60% Offer with quick coupler and bucket - at a price of €62,900.00 net. Additional equipment available at an extra cost: Iijdpjz A Nqrefx Ahysh * Tipping bucket from 2.5 to 4 cubic meters from €4,950.00 * Bucket with bottom holder for quick coupler from 3.5 cubic meters €3,660.00 * 4-in-1 bucket 2 cubic meters, upon request. * Pallet fork 5 tons from €1,850.00 If desired, also available with a used scale! Pfreundt WK 60 (calibratable) - €5,900.00 Printer for the scale, price upon request. Prices net + VAT or for export. Note: The brochure only approximately corresponds to the offered machine!!! (Brochure is for machines from the year of manufacture 2019 onwards with engine emission class V) Sale only to business customers or for export. Sale in the condition as is. No guarantee or warranty. The specified mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. Iijdpfx Asz E Hx Sehyjh The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request.

Condition: used, Year of construction: 2007, operating hours: 8,570 h, Equipment: all wheel drive, Liebherr Wheel Loader L 538 2 plus 1 Iedszmpryepfx Ahyjih VIN: VATZ0433 HZB019019 - No particulate filter - no exhaust gas treatment - no Adblue, etc. Year of manufacture: 2007 Operating hours: approx. 8350 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and intercooling, 142 hp Hydrostatic drive with 3 driving ranges: Speed range 1: 0-6.0 km/h, Speed range A1-2: 0-16.0 km/h, Speed range A1-3: 0-34.0 (40) km/h Machine width: 2500 mm, Height: 3.28 meters, Length: approx. 7000 mm * 3rd hydraulic control circuit (for silage block cutter, high-dump bucket, etc.) * Air conditioning * Fuel pre-filter * Driver's seat with pneumatic suspension * Ride dampener * Radio (function not tested) * Adjustable steering column * 2 work lights on the rear roof of the cab, LED * 4 work lights on the front roof of the cab Road approval - 40 km/h - possible "Load-Sensing" axial piston variable displacement pump Permissible total weight: 16000 kg Brakes: Self-locking of the hydrostatic drive, acting on all 4 wheels, and additionally a hydraulic pump accumulator brake system with wet disc brakes located in the differential housing (two separate brake circuits) Machine width: 2500 mm Tires: 20.5 x 25 VA L3 - 50% Tires: 20.5 x 25 HA L3 - 50% Available at extra cost: * Quick coupler system Liebherr with hydraulic preparation: EUR 3,550.00 * 4-in-1 bucket (grapple-planer bucket) 2 cubic meters: EUR 3,950.00 * Volume bucket 3.5 cubic meters: EUR 3,990.00 * Bucket with retaining arm from 2.0 cubic meters to 3.5 cubic meters: EUR 3,660.00 * High-dump bucket from 2.5 to 5.0 cubic meters: from EUR 5,990.00 * Pallet fork 5 tons: from EUR 1,850.00 Also available with a used scale! Pfreundt WK 50 at a price of EUR 3,900.00 * All prices are net plus VAT or for export Sales only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures. Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle in part exchange. We are available to answer any further questions you may have. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: good (used), functionality: fully functional, gearing type: other, fuel type: diesel, tire condition: 70 %, axle configuration: 2 axles, suspension: hydraulics, Year of construction: 2017, operating hours: 11,420 h, Equipment: UVV, additional headlights, air conditioning, cruise control, hydraulics, parking heater, trailer coupling, Liebherr LH 60 M Industry G6.0-D Litronic – Year of Manufacture 2017 – 11,241 operating hours For sale is a Liebherr LH 60 M Industry G6.0-D Litronic material handler from 2017 with 11,241 operating hours. The machine was overhauled by Liebherr prior to purchase at approximately 10,000 operating hours. It is ideally suited for demanding applications in the recycling, scrap metal, and timber industries, as well as in industrial handling facilities. A 9 m long magnet crossbeam is currently installed and can be purchased as an option. It is not included in the selling price. A GTS-Imapla magnet system with a power output of 25 kW is installed. MACHINE DATA - Manufacturer: Liebherr - Model: LH 60 M Industry G6.0-D Litronic - Year of Manufacture: 2017 - Operating Hours: 11,241 h - Emission Level: Stage IV - Boom: straight, 9.50 m - Stick: angled, 8.80 m - Tires: Magna Supersolid solid tires, 18.00-25 - LIKUFIX MH 40B upper carriage, year of manufacture 2019 EQUIPMENT & HIGHLIGHTS - Liebherr Litronic control system with joystick proportional control - VarioLiftPlus 2A - GTS-Imapla magnet system with 25 kW - Medium-pressure circuit and grapple lines - Gas-filled energy recovery cylinder - Fully automatic central lubrication system - Outriggers front and rear - Cab riser LHC 340-35 Iisdpfez Sy Ubsx Ahyjh - Comfort driver's seat, air conditioning, and programmable auxiliary heater - Joystick steering and foldable control console - Rear and side monitoring with cameras - LED work lights on boom, stick, cab, and upper carriage - Foldable protective grilles FGPS/FOPS - Load moment limitation and working range height limitation - Stick and boom shutdown - Preheating for fuel, hydraulic oil, coolant, and engine oil - Reversible fan drive - Refueling pump - SCR technology including diesel particulate filter - LiDAT hardware as well as documentation and German operating manuals INCLUDES ATTACHMENT EQUIPMENT Liebherr LIKUFIX MH 40B upper carriage: - Year of manufacture 2019 - XHD version, 300 mm - Suspension for direct mounting - Screw couplings, 2-motor - Magnet operation - Hydraulic locking OVERHAUL AT LIEBHERR The machine was overhauled by Liebherr prior to purchase. We will gladly provide interested parties with further information on the scope of the overhaul. SALE & INSPECTION The sale is made directly by the operator and exclusively to commercial enterprises. All prices quoted are net plus applicable VAT. If you are seriously interested, we look forward to your contacting us to arrange an inspection appointment and to clarify further details.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 011171 LWE, mileage: 457,230 km, first registration: 01/2026, fuel type: diesel, tire size: 13R 22,5, fuel: diesel, brakes: other, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, Year of construction: 1980, operating hours: 11,399 h, Mobile crane Liebherr LTF 1025F Year of manufacture: 1980 Lifting capacity: 25 tons Telescopic boom: 24.40 m Approx. 457,230 km, 11,399 operating hours. Diesel engine Manual transmission Crane has been inspected annually. Iodpfx Asztr D Sshyoih Current DEKRA expert assessment valid until 03/2027. Ready for operation. Inspection possible by appointment. Further information and pictures available upon request.

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 Iiodpfx Aoymf Dajhysh tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: used, Year of construction: 2015, operating hours: 6,296 h, Liebherr R922LC crawler excavator from 2015 with only 6,296 operating hours! ----* Manufacturer: Liebherr * Type: R922LC * Year of manufacture: 2015 * Operating hours: approx. 6,296 * Last service at approx. 5,900 operating hours Iisdpfx Aez Ta Hmjhyoh * German machine * Incl. Lehnhoff MS21 quick coupler * Incl. hydraulic trenching bucket, 2 meters wide * Approx. 60% undercarriage remaining * More photos and videos available upon request * Price on request ----For further questions, please call: Erik Kortum: WhatsApp ?All information without guarantee, errors and prior sale excepted.