FLAT GRINDING MACHINE

Okamoto PSG -63 UA

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) Hsdpfx Ajxy S A Iopdew - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest - 1 set of drive knobs - Various wheel holders

Condition: good (used), total height: 2,500 mm, total length: 5,300 mm, total width: 2,500 mm, feed length X-axis: 1,550 mm, feed length Y-axis: 600 mm, grinding height: 800 mm, overall weight: 7,800 kg, GER RS 15/60 grinding machine Table 1500 x 600 mm X-axis travel 1550 mm Y-axis travel 600 mm Maximum grinding height 800 mm Wheel size 400 x 100 mm Automatic infeed Yes Dovetail accessory Yes Hedjvli H Sjpfx Apdow Cooling system Yes Machine dimensions (width x length x height) 2500 x 5300 x 2500 Weight 7800 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Hjdpsy D Ngzsfx Apdjw Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,700 mm, feed length X-axis: 5,700 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,700 mm, position of the milling head: Testa birotativa A+B 1° + 3°, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table length: 7,300 mm, table width: 1,090 mm, spindle motor power: 30 W, Equipment: documentation/manual, rotational speed infinitely variable, - FIDIA C20/H6 numerical control - Electronic handwheel - Operator platform - Spindle cooling system - 24-position tool magazine - 3 longitudinal tables, 1520 x 1000 x 900 mm Hodpfx Aszix Rwspdew - Splash guard enclosure - CE marking

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Hjdpfx Aewbginepdow Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) Hjdpfxjv T Nqao Apdew - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 70.0961.000.253, TECHNICAL DETAILS: Turning diameter: - Over bed: 800 mm - Over carriage: 560 mm - Diamter of face plate: 750 mm Height of centers: - Over flat ways: 380 mm - Over Vee ways: 358 mm Gap, bed and gap piece: - Turning diameter in gap: 980 mm - Width of gap in front of face plate: 380 mm - Swing in gap: 1040 mm - Width of gap in front of face plate within swing diamter: 330 mm Hedpfxoup A Rzj Apdsw - Width of bed: 560 mm Headstock spindle: - Diameter of spindle bore: 90 mm - Spindle diamteres in front bearing: 145 mm - Taper in spindle: 6 Morse Spindle speeds: - Number: 18 - Spindle speed ranges: 7,1 - 355 RPM 9,0 - 450 RPM 11,2 - 560 RPM Power required: 7,5 - 14 kW Feeds: - Number: 32 - Sliding feeds per revolution: 32 longitudal feeds: 0,071 - 2,5 mm/rev. 32 cross feeds: 0,04 - 1,4 mm/rev. Extras: additional equipment, manuals for machine

Condition: used, Year of construction: 1978, turning diameter over bed 1450 mm turning diameter over slide rest 1000 mm turning length 8000 mm spindle bore 160 mm turning speeds 2,8-560 U/min faceplate 1400 mm bed width 850 mm turning diameter in the gap 1800 mm length of gap 600 mm steady 1070 mm steady 1070 mm steady 650 mm Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hedoyqvwlepfx Apdow We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3370 mm well-maintained condition (!!) Hodpsxab I Tofx Apdew - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm Hsdow T Tlrspfx Apdow B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.