Section steel shear

Muhr + Bender KBL 16 Optima

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Tsdpfx Aju Icmhspdsd Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Tjdpfxjrm Nqmo Apdjd Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm Todeb N Erbopfx Apdod rear stop: 1000 mm power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Todsv Ip Sgepfx Apded

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm Todsfn Aqnopfx Apdjd tool hole in ram 45 mm ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4ROLL DUAL PREPINCH, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 430 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 35 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness brass (max.): 50 mm, overall weight: 35,000 kg, total length: 6,100 mm, total width: 2,225 mm, total height: 2,700 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 7, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, PLATE BENDING MACHINE 4 ROLL HYDRAULIC 3000 X 40 MM brand OMCCA YEAR 2009 DOUBLE INITIAL PINCH Machine used in working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 30 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 430 mm One extra smaller upper roll D=350mm fast interchangeable • Hardening of the rolls high strength surface • All 4 rolls driven hydraulic powered rollers rotation • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate being formed • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and digital readout 3 axis. • Digital readouts of the rolls position and top support • Power electric 50 Hp voltage 3-phase 400 /50 Todoz Rw R Dopfx Apded • Dimension 6100 x2225 x H 2700 mm - weight 35000kgs Additional tooling with the machine Top central support motorized to hold in place the formed plate up to diameter 3500 mm Side support hydraulic dual articulation

Condition: used, turning diameter over bed 4000 mm turning diameter over slide rest . mm turning length 5000 mm total power requirement 30 kW weight of the machine ca. . t dimensions of the machine ca. . m Specifications Turning length (mm) 5000 Max. turning diameter (mm) 4000 Max. turning diameter at offset (mm) 5000 Speed ??1.4 - 71 (18x) kW 30 Voltage 380V Hz 50 Including: 4-jaw faceplate Ø 3150 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Tsdpfxjyqtgdo Apdjd If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm Tedpfxstqm Dme Apdsd column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Year of construction: 1998, condition: good (used), machine/vehicle number: 4422758898019, Offer 22646 Hydr. profile and bar shears with notching device and hole punching machine Technical data: - Flat steel shear - flat steel - 400 x 16 mm - or: 300 x 18 mm - Section steel shear - L- and T-iron at 90° 130 x 12 mm - square steel / round steel 40 / 40 mm - notcher - with square notcher for sheets up to approx. 13 mm - notch depth approx. 70 mm Todpfxomb U Slo Apdod - notch width approx. 52 mm - Hole punch - punching force approx. 60 t - throat 400 mm - stroke approx. 10 to 50 mm - punches in steel up to Ø 31 in 15 mm - material stop - div. 10 pcs. punch + dies - drive 400 V / 5,5 kW - space requirement W 1100 x H 2000 x D 1700 mm - weight approx. 2100 kg

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm Tedpelp U D Eefx Apdjd ram surface 700x450 mm hole in the table Ø 280 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm