Vertical machining center

MTRent MTcut V130Y-12 TH

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW Laedpjx Hn D Rsfx Albsh High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Year of construction: 2015, condition: ready for operation (used), A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible. Lasdpfx Aljxwn I Uobsh

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. Ljdpfxoxdiigs Albjah X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT Lasdpfx Alouhbnnebsh - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Ljdpsrb A Tcsfx Albjah Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] Lodsuhaycjpfx Albsah - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] MACHINE HOURS - Number of hours under power : 46571 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2 - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor : KNOLL - Coolant tank * with high-pressure pump : 100 [bars] - Bar loader : TORNOS ROBOBAR SSF - Oil mist extractor : Elbaron - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Lasdpfx Aothuzpolbeh Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: like new (used), Year of construction: 2015, operating hours: 987 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HURCO, controller model: WinMax 5, total height: 3,010 mm, total length: 4,800 mm, total width: 2,300 mm, table width: 660 mm, table height: 1,000 mm, table length: 1,680 mm, table load: 2,000 kg, overall weight: 8,420 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 987 h, distance table center to spindle nose: 101,711 mm, spindle motor power: 18 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, This CNC HURCO VMX60i machining center has seen very little use and is in excellent working condition. Ljdpfx Aozmfn Rjlbsah With only 987 operating hours and 4,115 power-on hours, it represents an ideal solution for those seeking a reliable, ready-to-use machine with extremely limited usage compared to its age. Key features: * CNC Hurco WinMax / MAX 5 * X/Y/Z axis travels: 1524 x 661 x 610 mm * ISO40 spindle at 12,000 rpm * 18 kW spindle motor * 1680 × 660 mm table with a load capacity of 2,000 kg * 30-position chain-type tool magazine The price refers to the machine in the configuration described in the technical data sheet. Upon request, the following equipment can also be provided: * Fourth-axis table * Tailstock * Set of tool holders The supply of the equipment will be quoted separately based on the customer's needs. For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed in our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, total width: 5,800 mm, total height: 4,500 mm, total length: 13,500 mm, table length: 10,000 mm, table width: 1,250 mm, Travelling Column High performance, precision and machining power Linear guiding of RAM combined with Hydrostatic Guiding HDS ACD2 Milling head with 5000 Rpm and 1400 Nm torq Aitek ATC chain 60 position with L=400 and 250 diameter x 35 Kg Filtration with IKZ 15 Bar Chip conveyor BLUM 3D Measuring probe Wide bed linear guided in X-Travel W=930 mm Rotary table driver prepared in E-Cabinet X-Axis: 8000mm Y-Axis: 1300mm Z-Axis: 2500mm Table Length: 10000mm Laedsyr Dmdopfx Albeh Table Width: 1250mm Power on spindle: 40kW Spindle speeds: 5000Rpm Spindle Taper: 40ISO/Bt/Mk Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Millinghead auto-index:0.001 x 0.001 Gr° Working hours: 3800H Length: 13500mm Width: 5800mm Height: 4500mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm Lsdpfjxz Ab Rsx Alboah - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401