Used Yamaguchi Wb 12 H for sale (64,566)

Condition: used, mileage: 13,597 km, power: 159 kW (216.18 HP), first registration: 10/1989, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 5,000 mm, loading space height: 1,650 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, very well-maintained MB 1222 AF 4x4 as a fire hose truck SW2000 with only 13,608 km on the clock A vehicle from the NG series - extremely robust and easy to repair The cabin and body are almost rust-free - an ideal base for a long-distance travel/expedition vehicle ABS, servo, differential lock center and rear axle, tow bar ring eyelet 1.5t, 5-speed manual transmission Driver's cab with 3 seats and roof hatch Dimensions: 5000 x 2450 x 1650 (LxWxH in mm) Wheelbase (axle distance): 3600 mm Gjdpfsvrapqox Afisuh fully functional and ready to drive on request with new TÜV and H certificate +++ Errors, changes and prior sale reserved

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Guodpfxowra Ewe Afish Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Condition: ready for operation (used), Siemens 1FT5066-0AF71-2-Z 3~ permanent magnet motor with Pfeffer + Partner RPL 20-1 H/VU gearbox, hole spacing of mounting holes: 85 x 85 mm, Ø drive shaft: 32 mm, i = 7, used, strong traces of use, 100% functional Gujdoi D Sf Sspfx Afish

Condition: new, Centrifugal pump Manufacturer: KSB Type: Etabloc-GN 50-125/302 GN11 Capacity: 50 m3/h 2900 rpm Lifting height: 13 m Weight: 62kg It is complete - with motor! Gsdpfehtlmnex Afieuh

Year of construction: 2023, condition: used, General information New: Yes Technical information Gjdjhz A Ngspfx Afieuh Power: 26 kW (35 HP) Engine capacity: 1.642 cc Chassis type: rigid Empty weight: 2.750 kg Make of engine: Yanmar Top speed: 25 km/h Functional Lifting capacity: 1.200 kg Lift height: 430 cm Maximum reach: 262 cm Other information Output of the auxiliary hydraulics: 48 l/min Rental currency: EUR Production country: FR Additional information Please contact Jan De Lepeleer for more information Available on normal and wide tires! Export price only (transport not included - no warranty) For Belgian price, please contact us!

Condition: used, Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump Guodpfxsg Avqcj Afieh -Double hydraulic pump: from injection molding machine KHS Krauss Maffei KM 1000-5000A -Pump 1: Voith type IPH 6/5-125/50 300 bar - Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher type? -Individual components: filters/valves see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: used, mileage: 18,057 km, power: 159 kW (216.18 HP), first registration: 02/1988, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 5,200 mm, loading space height: 1,670 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, very well-maintained MB 1222 AF 4x4 as a fire hose truck SW2000 with only 18,057 km on the clock A vehicle from the NG series - extremely robust and easy to repair The cabin and body are almost rust-free - an ideal base for a long-distance travel/expedition vehicle ABS, servo, differential lock center and rear axle, tow bar ring eyelet 12t, 5-speed manual transmission Guodpfx Asvrapwofieh Driver's cab with 3 seats and roof hatch Dimensions: 5200 x2450 x 1670 (LxWxH in mm) Wheelbase (axle distance): 3600 mm fully functional and ready to drive on request with new TÜV and H certificate +++ Errors, changes and prior sale reserved

Condition: used, mileage: 1,001 km, first registration: 01/1996, fuel type: diesel, color: white, driver cabin: other, gearing type: other, loading space width: 2,430 mm, loading space length: 7,300 mm, loading space height: 2,680 mm, Year of construction: 1996, Vehicle location: Bovenden, portal doors Body: Furniture case ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gsdpfx Afji Nw H Ioiouh - .

Condition: used, functionality: fully functional, load capacity per storage section: 10,000 kg, total width: 1,100 mm, load per truss pair (max.): 2,100 kg, frame height: 12,000 mm, clear span: 2,700 mm, product height (max.): 2 mm, Large Lot of Nedcon NR Pallet Racking, 12,000mm High (USED) · 1610x Frame Nedcon NR, Type 1006720, height options from 2,000 to 12,000mm, depths available in the following sizes: 900/1067/1080/1100x100mm, blue (section load max approx. 15,000kg, depending on beam heights). Frames are supplied in separate components. Both height and depth are variable! · 1400x Beam Nedcon NR, Type CC1004015, 2650x100x40mm, orange (2,150kg) · 16,960x Beam Nedcon NR, Type CC1004015, 2700x100x40mm, orange (2,100kg) · 390x Beam Nedcon NR, Type CC1104015, 2700x110x40mm, orange (2,350kg) Heights up to 12 meters and any depth are available. Pricing on request, depending on frame depth and required quantities. Gujdpfx Afowhi Rzoijh We also have a wide range of new and used Nedcon materials and accessories in stock! All prices exclude VAT. Payment: Due upon delivery. Ex warehouse Zutphen. Transport can be arranged if required. Used materials available while stocks last. Bastell Magazijninrichting BV Gerritsenweg 6 7202 BP Zutphen The Netherlands

Condition: used, Year of construction: 1994, x-travel 850 mm y-travel 630 mm Gujdpfx Afjtqqyioijh z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t dimensions of machine L x W x H 4,95 x 2,30 x 2,30 m Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, working width: 385 mm, area performance: 1,100 m²/h, overall weight: 40 kg, warranty duration: 12 months, water tank capacity: 12 l, KARCHER BD 40/12 C Bp Pack SCRUBBER NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) Guedpfx Ajwpuuzefish NEW SQUEEGEE BEAM 2013 production year 385mm cleaning head equipped with a new medium-hardness disc brush, enabling work on any surface. New polyurethane squeegee rubbers, resistant to contact with oil liquids, grease and petroleum derivatives Built-in battery charger facilitates daily operation The device is equipped with a new durable suction hose and a new drain hose The new suction turbine ensures high water suction power from the squeegee Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Working width (mm): 385 Squeegee width (mm): 450 Theoretical efficiency (m²/h): 1,100 Number of brushes (pcs.): 1 Brush rotation speed (rpm) 150 Capacity of clean water tank (l): 12 Capacity of dirty water tank (l): 12 Weight with equipment (kg): 40 INCLUDED: NEW GEL BATTERIES SONNENSCHEIN GF 12 025V (2x) NEW SQUEEGEE BEAM NEW 385mm PPL 0.5 disc brush NEW 24V 250W suction turbine NEW suction hose NEW drain hose NEW, oil-resistant rubbers Tenzi Normal 5 liters liquid - FREE KEY FEATURES: A 12 liter tank allows you to pour a large amount of cleaning solution, so you don't have to stop work often to refill it Thanks to its design, the machine is very maneuverable. A small turning radius allows you to work even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface A large working width (385mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: new, Year of construction: 2025, pressing force: 1,200 t, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, pressure: 250 bar, Equipment: safety light barrier, PLACE OF PRODUCTION TURKEY WARRANTY PERIOD 24 MONTHS - Steel construction body and parts with vibration method stress / welding tension removed - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS TYPE STEEL CONSTRUCTION, 8-SLIDE H PRESS BODY TYPE BODY MATERIAL St52 – ERDEMİR SLIDE BEARING BRONZE Zr14 CAPACITY (RAM) 1200 TONS MOVABLE TABLE DIMENSIONS 1500 x 2000 mm FIXED TABLE TABLE DIMENSIONS 1500 x 2000 mm PARALLELITY TOLERANCE 120 microns/mt. PERPETRACY TOLERANCE 60 microns/mt. STROKE (RAM) 1000 mm Gujdpevy Azlofx Afioh MIN. INTERMEDIATE SPACE 100 mm MAX. INTERMEDIATE SPACE 1100 mm WELDING STRESS RELIEF Stress relief by vibration WELDING APPLICATION EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) MAX. WORKING PRESSURE 250 Bar TOTAL MOTOR POWER 75 kW– IE3 MAIN PUMP 70 cm³ – REXROTH or PARKER MOVABLE TABLE FAST Descent Speed 150 mm/sec. MOVING TABLE PLASTERING SPEED 12 mm/sec. MOVING TABLE RETURN SPEED 170 mm/sec. MAIN CYLINDER INNER DIAMETER Ø 560 mm – Ck45 - 2 pcs. AUXILIARY ACCELERATOR CYLINDERS 2 pcs. APPROXIMATE HEIGHT OF PRESS 6100 mm APPROXIMATE WIDTH OF PRESS 3550 mm APPROXIMATE DEPTH OF PRESS 2400 mm LOWER TABLE HEIGHT FROM GROUND 1450 mm PRE-FILL VALVE NG 200 HYDRAULIC UNIT REXROTH or PARKER COOLING SYSTEM SUCTION – CIESSE – PARKER OFF-LINE FILTRATION REXROTH or PARKER MOTOR CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR REXROTH or PARKER AIR FILTER REXROTH or PARKER – 10 MICRON PERMEABILITY RETURN FILTER REXROTH or PARKER – 25 MICRON PERMEABLE OIL AND HEAT INDICATOR REXROTH or PARKER VALVES USED REXROTH or PARKER FILTER CONTAMINATION WARNING ELECTRONIC CONTROL LUBRICATING STYLE AUTOMATIC – (CAN BE ADJUSTED FROM THE SCREEN) RAM STROKE ADJUSTMENT CAN BE ADJUSTED FROM THE SCREEN RAM TONNAGE (PRESSURE) ADJUSTMENT CAN BE ADJUSTED FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE VISIBLE ON THE SCREEN PRESS STATUS INFORMATION CAN BE VISIBLE ON THE SCREEN MOLD MEMORY CAN BE ADJUSTED FROM THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE VISIBLE ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK or TURCK PLC APPLICATION DELTA TOUCH PANEL SCREEN DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER APPROXIMATE WEIGHT 60 TONS

Condition: used, mileage: 14,710 km, power: 159 kW (216.18 HP), first registration: 02/1990, overall weight: 12,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 5,000 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: ABS, very well-maintained MB 1222 AF 4x4 as a fire hose truck SW2000 with only 14,710km on the clock A vehicle from the NG series - extremely robust and easy to repair The cabin and body are almost rust-free - an ideal base for a long-distance travel/expedition vehicle ABS, servo, differential lock center and rear axle, tow bar ring eyelet 1.5t, 5-speed manual transmission Godovrapkjpfx Afisuh Driver's cab with 3 seats and roof hatch Dimensions: 5000 x2450 x 1600 (LxWxH in mm) Wheelbase (axle distance): 3600 mm fully functional and ready to drive on request with new TÜV and H certificate +++ Errors, changes and prior sale reserved

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Guodpfewc Tdujx Afioh Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: used, functionality: fully functional, load capacity per storage section: 14,000 kg, total width: 1,050 mm, load per truss pair (max.): 3,500 kg, frame height: 10,500 mm, clear span: 2,700 mm, Rafdella Pallet Racking 10500x1050x120mm (USED) · 37 x upright Rafdella, blue, 3900x1050x120mm (approx. 14,000 kg) Sales price: €95.00 each excl. VAT · 198 x upright Rafdella, blue, 10500x1050x120mm (approx. 14,000 kg) Sales price: €210.00 each excl. VAT · 1465 x beam Rafdella, 2700x140x50mm, orange (load capacity approx. 3,500 kg) Sales price: €20.00 each excl. VAT For larger quantities, prices are available upon request! Call or email to inquire about availability and pricing. All prices exclude VAT Payment: Due upon delivery Ex stock Zutphen. Assembly/transport can be arranged if required. Inspection available at additional cost! Used items while stocks last. Bastell Warehouse Equipment BV Gerritsenweg 6 7202 BP Zutphen Specialist in: Pallet Racking Storage for Euro and block pallets up to 1,500 kg per pallet. Drive-In Racking Maximize use of your space when storing large quantities of the same SKU. Shelving Systems Ideal storage for light goods up to 250 kg per level. Also suitable for multi-tier shelving construction. Wide Span Shelving Storage for medium-weight goods up to 600 kg per level. Cantilever Racking For timber boards, pipes, etc.—ideal for unrestricted loading access. Flow Racking Gujdswhltrjpfx Afioh FIFO (First In, First Out) system, maximizes available space utilization. Mezzanine Floors Double your warehouse floor space! Multi-tier mezzanines available. Keywords: pallet racking - warehouse racking - warehouse equipment - warehouse - pallet - rack - Euro pallet - block pallet - euro - block - chep - dpb - rack - pallet racking - warehouse - warehouse racking - warehouse racks - racks - warehouse equipment - warehouse solutions - used - second-hand - cantilever racking - cantilever - shelving - shelf units - wide span shelving - wide span - tyre racking - used wide span shelving - new warehouse racking - used warehouse equipment - archive shelving - office furnishing - tyre racks - drive-in racking - mezzanine - mezzanine floors - nedcon - PR - NR - overtoom - feralco - vogelsang - vogelzang redirack - ramada - EAB - hovuma - jungheinrich - mecalux

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Complete plant with Used Weinmann WBZ 160/12 Flexline in very good condition Gujdpfxjwi It Do Afioh

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, temperature: 85 °C, KARCHER HDS 801 E HOT WATER WASHER The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 150 bar and 740 l/h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture Fully electric water heating allows work in places where exhaust gas production is not allowed. Each device we offer has individually taken photos, you buy exactly the machine you see Guodpev Srxdefx Afijh TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phases Pressing capacity [l/h]: 740 Working pressure [bar]: 150 Max. heating temperature [°C]: 85 Heater power [kW]: 12 Connection power [kW]: 17.6 Cleaning agent tank [l]: 20 + 25 Hose length [m]: 10 Weight [kg]: 100 EQUIPMENT: NEW durable pressure gun by German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for dosing of cleaning fluid directly by the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service The RM110 water softener tank prevents corrosion and scale build-up inside the heating coil and other pipes.

Condition: used, Year of construction: 2007, High quality screw oil compressor. Direct drive is used, which is the most efficient drive method. Manufacturer: AIRPOL Model: NB 90 Capacity: 820 m3/h Max. pressure 1.0 MPa Engine power: 90 kW / 160 A (SCHORCH) Screw stage: GHH RAND, TYPE: CF128G (INGERSOLL) Load counter: 27.062 h Weight: 1850 kg Year of production: 2007 Full DTR documentation and UDT inspection book with tank passport New air and oil filters included. Guedpfx Ajvxh Unsfish Technical condition: used machine .

Condition: used, mileage: 60,784 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 12/2002, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2002, Equipment: ABS, parking heater, +++ Caution: No air conditioning - the control unit was removed by the authorities +++ Beautiful MB Vario 814D from the property of the authorities / state police: +++ Body thoroughly refurbished and partially repainted underneath +++ +++ Trailer hitch - interchangeable coupling 3.5t or optional rear step +++ Version as a bus (group vehicle) MR / high with auxiliary heating, driver's airbag, ABS and differential lock on the rear axle, as well as a retarder. This is an electric, wear-free eddy current brake for speed adjustment. The body was professionally repaired by us in-house and then repainted halfway up the rear. We disassemble the vehicles beforehand and, for example, seal the body seams with a permanently elastic sealant after painting. ``` We also partially derusted and painted the frame/chassis of this Vario, finally preserving it with wax for long-lasting protection. We also performed a fresh inspection on this Vario, including a change of engine oil and brake fluid, replaced all four batteries, and installed a new air dryer for the brake system. Furthermore, the plastic glazing in the cab was replaced with real glass. Thanks to its good insulation properties, the plastic glazing in the rear of the vehicle could be left installed. An ideal basis for a spacious motorhome - we can also carry out the technical modification to a So KFZ motorhome for you for an additional charge of €600. The vehicle will also receive a 220V external power supply with a residual current device (RCD) and two internal sockets. Here's some general information about the MB Vario 814D: The auxiliary heating system works very effectively: It's a hot water circulation heater with convectors in the passenger compartment for draft-free heating. The air conditioning system has been decommissioned by the authorities, so the previous air ducts could now make way for overhead cabinets. Top speed thanks to the long axle ratio: Top speed according to the documents: 120 km/h. A total of 11 seats. The passenger compartment seats are designed as recliners - with adjustable backrests and armrests. Furthermore, the left inner seats can be moved about 10 cm into the aisle for greater freedom of movement on the console. There are three effective roof hatches. Interior dimensions from driver's seat: 4000 x 1850 x 1900 mm (LxWxH) +++Subject to errors, changes, and prior sale. Gsdpfxeum Ifre Afisuh

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 9,385 h, load capacity: 2,500 kg, lifting height: 3,200 mm, mast type: standard, construction height: 2,200 mm, fork length: 1,200 mm, empty load weight: 3,845 kg, drive type: Treibgas, LPG forklift Load centre of gravity: 600 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tyres type: Superelastic Front tyres size: 23x9-10 Front tyres condition: New Rear tyres type: Superelastic Rear tyres size: 23x9-10 Rear tyres condition: New Description: Net price €19,900 negotiable Sale with invoice VAT is shown For sale is a very well-maintained Linde H25 T with standard mast, as well as 3 and 4 control circuits, e.g. for a side shifter with tine adjuster Front tyres NEW / Rear NEW UVV NEW Operating hours: 9385 Load capacity: 2500 kg Lifting height: 3200 mm Fork length: 1200 mm NEW forks Clearance height / overall height: 2200 mm Year of construction: 2020 We look forward to your inquiry Transport can be organized Gjdpfxovw E Dwe Afisuh 3rd valve, 4th valve,

Condition: excellent (used), Year of construction: 2014, operating hours: 355 h, functionality: fully functional, operating pressure: 160 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 122 kg, warranty duration: 6 months, temperature: 85 °C, HOT WATER WASHER KARCHER HDS-E 8/16-4M Guodpfov Rckbex Afieh The machine has 355 hours of operation The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 160 bar and 760 l/h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture Fully electric water heating allows work in places where exhaust gas production is not allowed. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phases Pressing capacity [l/h]: 760 Working pressure [bar]: 160 Max. heating temperature [°C]: 85 Heater power [kW]: 24 Connection power [kW]: 29.5 Cleaning agent tank [l]: 10 + 20 Hose length [m]: 10 Weight [kg]: 122 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks allow for dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service The RM110 water softener tank prevents corrosion and scale build-up inside the heating coil and other pipes.

Condition: used, mileage: 48,671 km, power: 174 kW (236.57 HP), first registration: 10/1992, overall weight: 12,500 kg, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t towing capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10 Rx 22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Hydraulic clutch fluid and windshield wiper blades also replaced. We will deliver the Iveco with a fresh MOT/AU and H-certificate upon request. = +500€ The GVW is 12.5t. The curb weight is approximately 8.0 t, so the 120-23 cannot be reduced to 7.5 t. The V8 diesel engine and 5-speed transmission run smoothly, the car is easy to drive. Godpowgg D Nefx Afijuh Top speed according to the documents = 93 km/h Bag dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: reconditioned (used), functionality: fully functional, working width: 385 mm, area performance: 1,100 m²/h, overall weight: 40 kg, warranty duration: 12 months, water tank capacity: 12 l, KARCHER BD 40/12 C Bp Pack SCRUBBERS NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) NEW SPE 24V 4.5A INTERNAL RECTIFIER 385mm cleaning head equipped with a new medium-hardness disc brush, allowing work on any surface. Polyurethane squeegee rubbers, resistant to contact with oil liquids, grease and petroleum derivatives Built-in battery charger facilitates daily operation The device is equipped with a new durable suction hose The new suction turbine ensures high water suction power from the squeegee Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Working width (mm): 385 Squeegee width (mm): 450 Theoretical efficiency (m²/h): 1,100 Number of brushes (pcs.): 1 Brush rotation speed (rpm) 150 Clean water tank capacity (l): 12 Dirty water tank capacity (l): 12 Weight with equipment (kg): 40 INCLUDED: NEW BATTERIES GEL SONNENSCHEIN GF 12 025V (2x) NEW INTERNAL RECTIFIER SPE 24V 4.5A NEW disc brush 385mm PPL 0.5 NEW suction turbine NEW suction hose NEW drain hose Suction strip with oil-resistant rubbers Tenzi Normal liquid 5 liters - FREE KEY FEATURES: A 12-liter tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very maneuverable. A small turning radius allows you to work even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface A large working width (385mm) ensures high surface efficiency Gedpfxewcqzdj Afijuh A very legible and intuitive control panel.

Condition: used, mileage: 63,521 km, power: 174 kW (236.57 HP), first registration: 02/1992, overall weight: 12,500 kg, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 3,100 mm, Equipment: parking heater, A proper Iveco Magirus with 4x4 all-wheel drive and hydraulic Rotzler winch. Air-cooled V8 naturally aspirated diesel engine – extremely robust and powerful. 2x rear and center differential locks, rear extension for the winch, 5t pulling capacity, 10t via rear extension with pulley. Tow bar with 12.0t ring eyelet and continuous braking system. 7 seats registered, various new parts, 10x22.5 tires. Freshly serviced with fuel filter replacement, air dryer cartridge replaced, starter batteries replaced, wheel brakes and all fluids lubricated and checked. Guodpewgg D Asfx Afioh Hydraulic clutch fluid and windshield wiper blades also replaced. The front inner fenders were professionally welded by us, and the outer chassis parts and rims were repainted. The Iveco will be delivered by us with a fresh MOT/AU and, upon request, with a new MOT/AU. H-approval submitted, = +500€ The GVW is 12.5t, the curb weight is approximately 8.0t – the 120-23 cannot therefore be reduced to 7.5t. The V8 diesel engine and the 5-speed transmission run well, the car can be driven without any problems. Top speed according to the documents = 93 km/h Body dimensions: 3870 x 2490 x 1600 mm (LxWxH) +++ Errors, changes, and prior sale are reserved.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, high-pressure hose length: 15,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 130 kg, warranty duration: 6 months, NILFISK POSEIDON 8 - 125 ST COLD WATER WASHER Equipment: original Nilfisk gun, stainless steel lance with power nozzle, new steel braided hose Brass, durable head with ceramic pistons guarantees long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 160bar and 2450l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Pump pressure (bar) 160 Gsdpfx Aswcl Rgjfieuh Pump (rpm) 1450 Power consumption (kW) 14.5 Voltage/phase/frequency/current (V/~/Hz/A) 400/3/50/24.9 Water flow (l/h) 2450 Max. inlet temperature (°C) 50 Weight (kg) 130 Length x width x height (mm) 900x660x910 EQUIPMENT: ORIGINAL durable Nilfisk pressure gun - 300bar ORIGINAL Nilfisk pressure lance made of stainless steel 1000mm NEW reinforced pressure hose in steel braid 15m Power nozzle Water filter and GEKa claw couplings - FREE KEY FEATURES: Open oil system - no operating time limit Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to use servicing