Used Ws 54 for sale (29,256)

Condition: used, mileage: 481,126 km, power: 265 kW (360.30 HP), first registration: 03/2015, fuel type: diesel, number of seats: 54, gearing type: automatic, next inspection (TÜV): 11/2025, emission class: euro6, color: white, brakes: retarder, Year of construction: 2015, Equipment: ABS, air conditioning, bathroom, parking heater,

Year of construction: 2023, condition: new, New Refrigeration Dryer Year of Manufacture: 2023 User-friendly operation concept Efficient design for cost-effective and safe operation Cooling fan with 0 - 100% variable speed control, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wear parts with a consistently stable pressure dew point Control panel displays five different alarm statuses and retains them in memory Refrigeration compressor switches off below 15°C ambient temperature when no compressed air is flowing through Clear layout and easy access to all serviceable components Equipped with an integrated automatic condensate drain Key Advantages at a Glance • High efficiency • Excellent price-performance ratio • No unnecessary compressed air losses thanks to integrated electronic condensate drain • Connected tools and machinery are optimally protected • User-friendly operation concept TECHNICAL DATA General Information Airflow rate: 900 l/min Airflow rate: 54 m³/h Maximum pressure: 16 bar Iisdpfxow I U H Ts Afijh Air connection: ½" Power consumption: 0.18 kW Dimensions and Weights Length (approx.): 325 mm Width/Depth (approx.): 430 mm Height (approx.): 445 mm Net weight (approx.): 24 kg Availability: short term Location: Hochheim

Condition: good (used), Horizon MKU-54 Mobile Knife Fully functional device, ready for production. Machine from the first owner. Very good condition. Horizon production, Japan Can be connected to any Horizon folding machine. Height adjustment, knife rotation by 180°, speed adjustment, reaction time, counter. Wiring included. Technical parameters: Max sheet size 540x330mm Min sheet size: 160x100mm Isdpfx Afewxta Ioijih Paper weight 35-220 gsm Power supply 230V Weight 250kg

Condition: used, Year of construction: 2012, Log stacker Svetruck, type TMF 15/11 Year of construction 2012 Mileage 16370 according to counter Total weight 58500 kg Machine dimensions complete in length x width x height 11400 x 3900 x 6000 mm Machine dimensions (dismantled) in length x width 7500 x 3900 mm Height without dimensions 4700 mm Height without mast and mast support 4300 mm Mast dimensions in length x width x height 8000 x 1600 x 2000 mm Grab dimensions in depth x width (closed) x height 1400 x 3600 x 4200 mm Length of gripper open 5200 mm, height of gripper 4000 mm Front wheelbase 1500 mm Height 250 mm (pole plate) Rear wheelbase 1600 mm Height 400 mm Lifting capacity telescope retracted max. 15000 kg Lifting capacity telescope extended max. 11000 kg Stacking height telescope extended (open gripper) 8000 mm Stacking height telescope extended (closed gripper) 7600 mm Iiedpfx Afsvm Ihdjijh Reach center drive axle max. 6870 mm Powered by 6 cylinder Volvo diesel engine with 289 KW / 393 HP Displacement 12130 cm³ Transmission type Torque converter Automatic 3 forward ? and 3 reverse gears Travel speed 27 km/h Tire size 18.00 x 25? We will be happy to send you more details and further pictures on request. This description is not a binding offer and may contain errors. No guarantee for all details.

Condition: used, Year of construction: 2007, - One Shot color - Pentium CPU mit Windows XP - 72 GB Virtual Image Memory (RAID) - internal HP Indigo RIP (Adobe PostScript 3) - ITT (Image Tracking Technology) - Inline Densitometer - Color Personalisierung - HDI (High Definition Imaging) - DVD writer - OFIR (Online Fast Ink Replacement) - 5., 6. und 7. Farbe (Weiß, Orange, Violett) - Blanket Cleaning Station - BID washer - WebReinsertion kit for duplex printing - Spare Ink Tank - Ink Mixing System Iedpfx Afsw Nhd Usioih

Condition: used, machine/vehicle number: 16228, Year of construction: 2015, operating hours: 13,636 h, load capacity: 2,500 kg, lifting height: 200 mm, load center: 600 mm, construction height: 1,300 mm, fork length: 1,150 mm, overall weight: 870 kg, enginetype: Electric, manufacturer: Jungheinrich Iisdpfx Aow R Durofieh

Year of construction: 2010, condition: ready for operation (used), Connected load: 8kW, weight: 2.2t, with control cabinet. Iisdpfoilht Usx Afioh

Condition: ready for operation (used), Year of construction: 2000, Recirculating air thermal cabinet / warming oven / drying cabinet / drying oven Alltherm WS 3750 - 1.5 - E - 24l The heated cabinet is equipped with two separately controllable chambers. Maximum temperature per chamber: 250 degrees Celsius Approximate dimensions: Left chamber: Height 167 cm x Width 131 cm x Depth 91 cm Iiodpfx Afowuqvrsish Right chamber: Height 167 cm x Width 145 cm x Depth 96 cm Approx. external dimensions of the entire oven: Length 380 cm x Height 250 cm x Depth 128 cm The left chamber is additionally fitted with a viewing window. Location: Siegen ____ Our general terms and conditions apply. The seller assumes no liability for typographical or data transmission errors. The information and images were provided by the owner and released for publication. The appearance of the items on offer corresponds to their age and the photos shown. The technology and wear and tear of the items offered are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Condition: excellent (used), functionality: fully functional, Warming cabinet Temperature adjustable up to 90°C Stainless steel construction Isdpfjvdkuuex Afijih Dimensions: 440 x 450 x 850 mm (W x D x H) Connection: 220V, 750 watts Used device, cleaned Many more bakery machines in stock!

Condition: used, Year of construction: 1975, 1640 weight 280 kg ja Iiodpfxsh H Eqns Afioh +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, mileage: 796,179 km, power: 220 kW (299.12 HP), first registration: 02/2002, fuel type: diesel, number of seats: 54, gearing type: mechanical, emission class: euro3, color: green, brakes: retarder, Equipment: air conditioning, * Setra S 315 UL * Intercity bus * 54 seats * Manual transmission * Retarder * Air conditioning * Webasto * VIN: WKK62710113002870 * Mercedes engine * Engine type: CM457HIA * 6 cylinders * Euro 3 * kW: 220 * Displacement: 11967 cc * Curb weight: 12,650 kg * Gross weight: 18,000 kg Iisdpfxeq Ra Nqe Afish * Wheelbase: 6,080 mm * Vehicle length: 12,000 mm * Vehicle width: 2,500 mm * Vehicle height: 3,340 mm * Tires: 295 / 80 R 22.5 * (ACCIDENT) Slight front damage * Windshield has a crack * Net price * Our information is supplied without guarantee or warranty

Condition: used, machine/vehicle number: 16227, Year of construction: 2021, operating hours: 3,681 h, load capacity: 2,000 kg, enginetype: Electric, manufacturer: Jungheinrich Iodpfx Afew R Abqsisih

Condition: ready for operation (used), Year of construction: 1975, An Illig thermoforming machine is available. Form dimensions X/Y: 500mm/380mm, max. film width: 540mm, draw depth range: -120mm/+120mm, max. feed length: 360mm, cycle rate: 30 cycles/min, punching area X/Y: 500mm/390mm, punching force: 50000daN, machine dimensions X/Y/Z: approx. 4500mm/2200mm/2200mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Isdpfswixynox Afijih

Condition: ready for operation (used), Siemens 1FT5066-0AC01 3-phase permanent magnet motor, serial number: E 7G10 7041 54 027, used, in good condition, 100% functional, scope of delivery as per photos Iiedjw D Ndgopfx Afieh

Condition: used, Year of construction: 2012, System is incl. lifting jib crane. Connected load: 9 kW/16A. Work table: approx. 2000 x 3600 mm. Iedowqdnyopfx Afieih Working height: 720 mm External dimensions of the cutting system: Length: approx. 4250 mm. Width approx. 2330 mm.

Condition: new, Year of construction: 2015, Brand new in box, never used. The ILIOS HEWH - 500 - WS gas heat pump uses natural gas to produce hot or cold water via a combustion engine (Ford 2.5l) and Bitzer compressor. Heats up to 60°C (max. 71°C). Highly efficient unit (fully recovers heat from oil, coolant and exhaust gases), delivers three times the efficiency compared to a gas furnace using the same amount of gas. A new unit of this performance costs approximately EUR 45,000. Ideal for hotels, guesthouses or any industrial facilities. Iiedpfx Afowurrzeijh Worldwide delivery available.

Condition: used, Year of construction: 1986, functionality: limited functionality, type of input current: three-phase, filling weight (min.): 170 g, filling weight (max.): 500 g, Filling line for jars with twist-off lids, comprising: infeed rotary table, Kugler filling machine, upstream jar blowing station (steaming, unique / prototype), capping machine with vibrating hopper for twist-off lids with steaming, including steam generator. Previously used for jars with diameter/filling volume of: 63 and 66 mm for approx. 225 ml // 82 mm for approx. 425 ml. Heated product hopper, optionally with pneumatic transfer cart. Control system completely rebuilt in 2019; new vibration sensor/controller installed. Ijdpfx Afow I Awgoieih

Year of construction: 2013, condition: new, Unused Siebtechnik BHG 21/61/1 WS (WS 85 System) with GR 45 Unbalance exciter on top. Banana Screening Machine. Mach. No.: 28102 . Auftr.nr.: 1-200755-00 . Year of manufacure: 2013 . Iiodonwgrpopfx Afish Complete with E.motor, Cardan shaft and Rubber springs .

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Iiodpswwvwysfx Afijh

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Karl Klein, blower radial fan Iedew Ava Sepfx Afieih -Type: DNG3-9.8/S WS L -Motor power: 0.07-0.16 kW -Speed: 2580 - 2810 rpm -Volume output: 445 -485 m³/h -Fan wheel: Ø 135 x 60 mm -Connection input: Ø 100 mm -Connection output: 80 x 65 mm -Quantity: 5 pieces available -Price: per piece -Dimensions: 430/200(H265 mm -Weight: 5.8 kg

Condition: excellent (used), Year of construction: 2011, For sale we offer a used two-sided Optimus sorting system. It is an optisorter, model WS 45200. The system is completely disassembled and prepared for transport. Technical data: Year of manufacture: 2011 Iodpfxjixl S Rj Afisih Counting panel: 3F + N + PE, Control voltage: 24 VDC, power supply: 400 V, 25 A (max.) Product dimensions: min. 150x150x5mm, weight 0,1kg; max. 400x280x40mm, weight 2kg Capacity: 4500 containers per hour Total length: 38 m width: 7 m Number of feeding stations: 3 pcs. Number of wings: 114 pcs. Total number of unloadings: 201, of which 120 on one side and 81 on the other side Number of motors: 2 pcs. Location of the machine: 89-600 Chojnice/Poland Machine is disassembled, dry stored and ready for shipment. If interested please contact

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 Ijdpst Hwruefx Afioih max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Iisdpew H Auqefx Afijh

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV, clamping cylinder stroke 30 mm -Type: 25-160 WS 08110 -Shaft Ø 12 mm Iodpfx Afjwzigieijih -Number: 1x clamping cylinder available -Dimensions: Ø 50 x 128 mm -Weight: 1.4 kg

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV, clamping cylinder stroke 23 mm -Type: 63-160 WS 08110 -Shaft Ø 28 mm -Number: 2x clamping cylinders available -Price: per piece -Dimensions: Ø 96 x 180 mm -Weight: 5.9 kg/piece Iisdpfewziaisx Afioh